• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.190-198
• /
• 2018

리모델링 시장이 커짐에 따라 품질이 우수한 건축물의 내장재 및 외장재들이 개발되고 있다. 개발된 내장재 및 외장재를 건축물의 구조체에 시공하기 위해서 구조체에 하지 철물을 설치하여야 한다. 건축물의 내장재 및 외장재 설치, 데크, 무대 및 마루 등의 시공 시 지지해주는 하부 구조물을 하지철물이라 한다. 하지 철물은 수평재와 수직재를 현장에서 용접 접합을 하여 구조체에 설치하는 방법이 주로 사용되었다. 일반적인 용접접합 방식의 시공은 용접 불씨에 의한 화재 발생으로 인명 및 재산 손실 문제와 전문용접공 부족으로 인한 비전문 용접공 시공에 따른 내구성 저하 문제 등이 발생하고 있다. 하지철물의 시공방법도 안전사고 및 시공의 용이성을 위하여 용접 접합 방법에서 무용접 접합 방법으로 개선되어지고 있다. 이는 화재예방 가설재와 소화장비 및 인원이 불필요하고 볼트조립으로만 시공이 가능하여 인건비 절감과 공기단축이 가능하다. 이에 용접을 사용하지 않는 무용접 하지 트러스 공법을 이용하여 접합부 거동을 실험하여 검증하고자 한다. 또한, 무용접 접합방법으로 시공 시 볼트 체결부분에서 틀어짐 현상이 발생하기도 하여 이를 보완하는 방법으로 각관, 유격방지 브라켓, 파스터, 홈볼트 체결을 통하여 일반 볼트접합인 각관, 화스너, 홈볼트 조립방법에서 좌우간의 틀어짐 현상을 방지하고 부재간의 미끄러짐 현상을 제어할 수 있도록 하는 시스템을 적용하여 접합부의 거동을 평가하고자 한다. 그 결과 무용접 접합방식의 하지철물 골조는 지진하중저항시스템에서 내진등급에 따라 요구되는 허용 층간변위각 0.01~0.02 보다 매우 큰 부재각까지 변형한 것으로 나타나 충분한 변형성능을 확보하고 있음을 알 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.243-244
• /
• 2012

Recently, research has been actively conducted for getting interested in unit module housing. However, the domestic unit modular housing research in the early stages yet, so the major process for research is lacking. Explore all these reasons fit with domestic unit housing development this paper, focusing on the process of shipping cargo by truck, transport unit module was studied. The purpose of this paper is to present new ideas and derive the direction of the development of the equipment safely and effectively fixed to the unit module of the transport unit module that will be helpful in the development of the equipment required for the transport process of the next unit module.

• 기술발표회
• /
• 통권2006호
• /
• pp.248-260
• /
• 2006

광양항 3단계 1차 컨테이너터미널 부지 연약지반개량의 경우 광양지역의 특성상 재하용 토사확보 곤란, 시공기간 단축 및 환경훼손 최소화를 위해 진공압밀공법이 적용되었다. 본 사례연구에서는 진공압밀공법의 시공에 따른 문제점 및 개선사항을 제시하였고, 현장계측 및 진공 압밀완료 후에 실시된 지반조사 결과 등을 분석하여 준설매립지반에서의 진공압밀공법의 적용성을 평가하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.19-20
• /
• 2019

The purpose of this study is to apply a test method that evaluates durability under wet environment rather than the strength of the material itself to reflect the environment of use and field conditions of silic acid powder applied waterproof material, and to prepare a foundation data for differentiated performance criteria through test verification.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.149-150
• /
• 2013

Energy systems in increasing energy efficiency are actively performed at home and abroad. But Generally systems in the country are limited in a new building or sort of some buildings like a public and office building. So, this research suggest a new direction of energy system for existing buildings. It need to set a new bound for containing the green remodeling. For a direction, we analysis domestic energy system in perform and compared their bounds, standard and methods of energy evaluation. This study is necessary for an additional research for proposing detailed evaluation items and for a feasibility study research. And it contribute to develope internal energy systems and set a new system bound.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.56-57
• /
• 2019

Recently, the risk of fine dust is emerging in Korea. According to the OECD report, the incidence of hospitalization and mortality from lung disease is increased, and the incidence of lung cancer and mortality from ischemic heart disease with prolonged exposure are increased. In addition, indoor air quality has become an important factor affecting the human body as indoor life has increased due to the Industrial Revolution. Air pollutants that cause indoor air deterioration typically include particulate dusts as described above, formaldehyde and VOCs released in gaseous form from adhesive wood products used in building materials and furniture. May cause breathing problems. In this study, we analyzed the properties of adsorption matrix for improving indoor air quality using cork.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.235-236
• /
• 2022

Electric vehicle fires in underground parking lots are very dangerous, but it is judged that the current related laws and regulations do not change, which will cause problems. As a result of the analysis for the purpose of providing an electric vehicle in an underground parking lot, fire-resistance coating is essential as it can cause an explosion in the building members made of high-strength concrete when an electric vehicle fire occurs in an underground parking lot. Since a fire occurs, it is necessary to prevent electric vehicles from parking adjacent to each other.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.55-56
• /
• 2022

Recently, water leak is increasing due to poor compaction or segregation of concrete on external wall. In addition, the flatness quality of the slab is lowered due to the deterioration of the workability of concrete. In this study, the performance of high fluidity concrete of 21MPa using a polycarboxylate-based superplasticizer was evaluated to improve the compaction and quality of the concrete wall.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.43-44
• /
• 2022

In this study, the optimum amount of chloride ions is used to collaborate with hybrid corrosion inhibitor for carbon steel rebar treatment in simulated pore concrete (SCP) solution is discovered. The corrosion inhibition performance of hybrid inhibitors is carried on by open circuit potential (OCP), electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization (PP). The highest corrosion inhibition resistance is found in case of LP-C2 after 240 h exposure. Surface studies including scanning electron microscopy (SEM), and atomic force microscopy (AFM) were used to figure out the surface morphology of the steel rebar treated with hybrid inhibitors in order to collaborate well with electrochemical studies. Anodic type inhibition action was confirmed by potentiodynamic polarization study.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.38-39
• /
• 2021

The use of temporary container classrooms has increased in recent years due to the development of the construction industry and renovation or rehabilitation of schools. Therefore, various problems, such as errors during assembling, design and insulation issues, and noise problems, have surfaced during the construction of temporary container classrooms. This study analyzes the causes of assembly errors during the manufacturing and installation processes to improve the quality of temporary container classrooms. Assembly errors are caused by non-level planes and inaccurate cutting during the manufacturing process. In the installation process, poor leveling is a major factor that causes errors during the assembly of temporary container classrooms. These causes result in uneven horizontal or vertical planes and uneven height. To solve these problems, quality improvement measures, such as pin connection, jig, joint coupling, and surface plates are proposed in this study.