• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.131-137
• /
• 2020

The characteristics of forced vibration with excited sinusoidal force was introduced. Also, numerical analyses and FRF in frequency domain were performed in detail. In this regard, the responses of displacement, velocity and acceleration were investigated in a forced vibration model. The FRF characteristics in real and imaginary part around natural frequency are also discussed. This response approach of forced vibration in time domain is used for the identification and monitoring of sinusoidal forced vibration. For acquiring a displacement, velocity and acceleration, a numerical technique of Runge-Kutta-Gill method was performed. For the FRF(frequency response function), These responses are used. Also, the FRF can represent the intrinsic characteristics of the forced vibration. These performed results and analysis are successful in each damped condition for the forced vibration model. After numerical analysis of the different mass, damping and stiffness, the forced vibration response characteristics with sinusoidal force was discriminated considering its amplitude and frequency simultaneously.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.3
• /
• pp.189-195
• /
• 2004

The underwater sound of California gary whale was analyzed to discuss obtained results from the previous data to compare the underwater sound between Korean gray whale and California gray whale. The frequency of low frequency rumble which occupy about 50% of the underwater sound changed to max. 654Hz and the average of its lasted time was 570msec. The range of frequency variation was coincided as compared with the previous data. The range of frequency variation for the bubble type sounds and knocks was 24${\sim}$1029Hz, respectively. The average of lasted time was 1100msec and 1364msec, respectively. The range of frequency variation and lasted time of bubble type sounds was higher than the previous result while the sound of knocks was coincided. The range of frequency variation for the sound of bong, pluses and chirps was 34${\sim}$213Hz, 75${\sim}$360Hz and 120${\sim}$200Hz, respectively and the average of lasted time was 84msec, 873msec and 80msec, respectively.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.831-834
• /
• 2000

본 논문은 주파수 전이신호와 시간 전이 신호에 대해서 고조파 잡음 여기 방법과 시간 분리 여기 방법을 적용한 2.4kbps 음성부호화 방법을 제안한다. 혼합 여기 부호화 방법은 주기 신호와 비 주기 신호를 효과적으로 표현하기 위해 하모닉 잡음 모델을 사용한다. 혼합신호에 대한 잡음 성분은 캡스트럴 분석 방법을 사용함으로써 추출되고, AR(Autoregressive Model) 모델에 의해 표현된다. 시간 전이구간 신호에서의 모호한 음성을 효과적으로 제거하기 위한 또 다른 방법이 제안된다. 제안된 시간 분리 방법은 시간 에너지 변화정도를 관찰함으로써 전이 시점을 감지하고 다른 시간 길이를 가지는 두 블록으로 분리하여 분석한다. 시간 분리 방법은 분석을 위한 비대칭 윈도우와 합성에서의 위상 합성 방법을 포함한다. 제안된 방법을 사용한 2.4kbps 음성부호화 방법은 주관적 음질 평가에서 전이구간에서의 지각적 음질의 향상을 보여주었으며, 원본 음성 스펙트럼과의 고조파 비 매칭에 의한 윙윙거리는 기계적인 잡음을 감소시킨다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.3
• /
• pp.407-413
• /
• 2010

This paper reports on the research which analyzes acoustic signals acquired in progressive compressing, hole blanking, and burr compacting process. An acoustic sensor was set on the bed of hydraulic press. Acoustic signal is generated from progressive stamping process. First the signal acquired from the unit process; compressing, blanking or compacting, is studied by Fourier Transform and Short Time Fourier Transform. The blanking process emitted ultrasonic signal with more than 20kHz, but the compressing and compacting processes emitted acoustic signals with lower than 10kHz. The combined signals periodically acquired right after the tool grinding were then analyzed. 70-80kHz signals appeared in time-frequency domain, but not in the frequency domain, the magnitude of which was related to the tool wear. Short Time Fourier Transform made up for the Fourier Transform in analyzing the emitted signal for stamping process in the ultrasonic domain.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.3
• /
• pp.216-225
• /
• 2020

In this paper, broadband underwater propagation channel modeling based on eigenray analysis is discussed. Underwater channels are often formulated in frequency domain time-harmonic signals, which are impractical for simulating broadband signals in time domain. In this regard, time domain modeling of the underwater propagation channel is required for the simulation of broadband signals, for which the eigenray analysis based on ray tracing, resulting in multipath propagation delays in time-domain, is used in this paper. For discrete time system application, the phase, frequency-dependent loss and non-integer sample delays for each eigenray, are approximated by the finite impulse response of the broadband propagation channel.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.159-159
• /
• 2010

펄스 직류 전원 $BCl_3$/He 플라즈마를 사용하여 GaAs의 건식 식각을 연구하였다. 공정 변수는 가스 유량 (0~100% $BCl_3$ in $BCl_3$/He), 펄스 파워 ($450{\sim}600\;{\nu}$), 펄스 주파수 (100~250 KHz), 펄스 시간 ($0.4{\sim}1.2\;{\mu}s$)이었다. 식각 공정 후 식각률, 포토레지스트에 대한 식각 선택도, 표면 거칠기는 표면 단차 측정기를 이용하였다. 식각 공정 동안 플라즈마 광 특성 분석은 광학 발광분석기 (Optical emission spectroscopy)를 사용하였다. 실험 후 주사 전자 현미경을 이용, 식각 후 시료의 단면과 표면을 관찰하였다. 실험 결과에 의하면 1) 펄스 파워, 주파수, 시간을 고정 ($500\;{\nu}$, $0.7\;{\mu}s$, 200 KHz)하고 10% He 가스가 혼합되어 있는 조건에서 GaAs의 식각률이 순수한 $BCl_3$를 사용한 것보다 높았다. 이를 통해 식각 공정에서 일정량 이하의 He 혼합은 GaAs 식각률을 증가시키는 시너지효과가 있음을 알 수 있었다. 2) 그러나 약 20% 이상의 He 가스의 혼합은 GaAs의 식각 속도를 저하시켰다. 3) 10% He (9 sccm $BCl_3/1$ sccm He), 200 KHz 펄스 주파수, $0.7\;{\mu}s$ 펄스 시간의 조건에서 펄스 파워가 증가함에 따라 GaAs의 식각률 또한 선형적으로 증가하였다. 4) 특히, $600\;{\nu}$의 파워에서 식각률은 ${\sim}0.5\;{\mu}m/min$로 가장 높았다. 5) 표면 단차 측정기와 전자현미경을 이용하여 식각한 GaAs를 분석한 결과 10% He이 혼합되어 있는 조건에서는 우수한 수직 측벽과 매끈한 표면 (RMS roughness <1 nm)을 관찰할 수 있었다. 6) 10% He이 혼합된 $BCl_3$/He 펄스 직류 플라즈마 식각 후 XPS 분석결과에서도 기준 샘플과 비교하였을 때, 공정 후의 GaAs 표면이 화학적으로 깨끗하며 잔류물이 거의 검출되지 않았다. 위의 결과를 정리하였을 때, 펄스 직류 $BCl_3$/He 플라즈마는 GaAs의 식각에서 매우 우수한 공정 결과를 나타내었다.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.1
• /
• pp.41-47
• /
• 2010

The pitch alteration technique for voice conversion is classified in time domain, frequency domain and hybrid domain. The Hybrid domain method has a merit of clearness and natural-ness of pitch altered speech but has the major drawback of long processing time. In this paper, we proposed a new method that can reduce the processing time of pitch alteration in time-frequency hybrid domain. We omitted the bit-reversing process of FFT and IFFT in changing the processing domain. Therefore we can reduce the processing time by 86.26% to the conventional method with same quality.

• Journal of the Korean Institute of Gas
• /
• v.23 no.3
• /
• pp.27-32
• /
• 2019

In this study, the vorticity distribution and the temperature distribution change around a circular cylinder were compared and analyzed with time for constant inlet velocity and periodic inlet velocity. Also, the frequency characteristics of the flow were analyzed by analyzing the time variation of lift and drag and their PSD(power spectral density). In the case of constant inlet velocity, the well known Karman vorticity distribution was shown, and vortices were alternately generated at the upper and lower sides of the circular cylinder. In case of periodic inlet velocity, it was observed that vortex occurred simultaneously in the upper and lower sides of the circular cylinder. In both cases, it was confirmed that the time dependent temperature distribution changes almost the same behavior as the vorticity distribution. For the constant inlet velocity, the vortex flow frequency is 31.15 Hz, and for the periodic inlet velocity, the vortex flow frequency is equal to the preriodic inlet velocity at 15.57 Hz. The mean surface Nusselt number was 99.6 for the constant inlet velocity and 110.7 for the periodic inlet velocity, which showed 11.1% increase in surface heat transfer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3104-3109
• /
• 2009

The technology of direction finding is very important to find the direction of emitters for ELINT(electronic intelligence) system. The principle of TDOA(time difference of arrival) is to receive an emitter signal with two antennas, measure the time difference between two antennas, and converse the time difference to direction difference. This technology can be used in broadband frequency system and make the system very simple because a phase-discriminator and a voltage comparator are not needed. For fine DF accuracy, high time resolution receiver and long basis line antennas are needed. The DF accuracy of noise added signals is simulated with different time

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.130-137
• /
• 2010

An uplink indoor positioning system is proposed in the present work, where the acoustic signals are solely used for positioning. The underlying acoustic signals include whistle, finger snap, and hands-clapping. In the proposed method, positioning is achieved by finding the time-difference-of-arrivals using several self-generating sounds. To evaluate the feasibility of the signals and their positioning accuracies, the database of 100 persons about self-generating acoustic signals is built up. The results show that the hands-clapping sound is the most suitable for acoustic-based indoor positioning.