Kim, Seong-Jun;Kim, Su-In;Kim, Dong-Uk;Kim, Ju-Yeon;Lee, Eun-Hyeok;Sin, Dong-Hun;Lee, Chang-U
Proceedings of the Korean Vacuum Society Conference
/
2013.08a
/
pp.182.1-182.1
/
2013
Silver (Ag)는 높은 반사율을 가지고 있어 Top-Emission Organic Light Emitting Diode (T-OLED)의 반사전극으로 사용하기 적합하지만 일함수가 낮은 단점 (4.3 eV)을 가지고 있다. 이런 낮은 일함수를 증가시키기 위하여 Ag 박막 표면을 산화시켜 일함수를 증가시키기 위한 연구가 진행중에 있으며, 이 연구에서는 UV로 $O_3$을 발생시켜 Ag 박막 표면을 산화시키기 위한 연구를 진행하였다. 특히, Ag 박막 표면의 일함수 변화를 측정하기 위하여 SPM (Scanning Probe Microscopy)의 KPFM (Kelvin Probe Force Microscopy) mode를 적용하여 nano 영역에서의 일함수 변화를 surface potential로 측정하여 UV 표면 산화에 의한 표면 일함수 형상을 확인하였다. Ag 박막은 rf magnetron sputter를 사용하여, Si 기판위에 300nm 두께로 증착시켰다. 이후 $O_3$ 발생되는 UV 램프로 Ag 박막 표면 30초 간격으로 최대 5분간 산화시켰으며, 이후 KPFM mode를 사용하여 산화 시간에 따른 Ag 박막 표면의 potential 변화를 측정하였다. 0~3분간 산화된 Ag 박막 표면의 potential은 약 6 mV로 일정하였으나 3분 이후 최대 110 mV까지 급격하게 변화하는 것을 확인할 수 있었다. Ag 박막 표면의 RMS roughness는 UV 산화처리 전0.7 nm였으나, potential이 급격하게 증가하는 시점인 3분 이후 2.83 nm로 약 400% 이상 증가하였다. 이를 통해 $O_3$ 발생 UV 램프로 산화된 Ag 박막의 표면 물성은 처리 시간에 따라 급격히 변하는 것을 확인하였다.
Proceedings of the Korean Vacuum Society Conference
/
1999.07a
/
pp.64-64
/
1999
다결정 실리콘-게르마늄(poly-SiGe)은 태양전지 및 TFT-LCD와 같은 소자 응용에 있어서 중요하게 연구되고 있는 물질이다. 우리는 수소화된 비정질 실리콘-게르마늄 (a-Si1-xGex:H) 박막을 증착시키고 고상결정화시키며 XRD(x-ray diffraction) 및 ESR (electron spin resonance) 측정을 수행하였다. PECVD 증착가스는 SiH4과 GeH4가스를 사용하였고 Ge의 성분비는 x=0.0, 0.1, 0.5 정도로 조절되었다. 기판은 Corning 1737 glass를 사용하였고, 기판 온도는 20$0^{\circ}C$ 이었다. 증착압력과 r.f. 전력은 각각 0.6Torr와 3W이었다. 증착된 SiGe 박막은 고상결정화를 위해 $600^{\circ}C$ N2 분위기에서 가열되고, 그에 따른 XRD 및 ESR spectrum의 변화를 관찰하였다. ESR 측정은 X-band 그리고 상온에서 행해졌다. 먼저 XRD 측정으로부터 박막의 고상결정화 정도를 알 수 있었고, 고상결정화 과정이 초기 핵형성 단계와 결정화 단계, 그리고 더 이상 결정화가 일어나지 않는 완료 단계로 구분될 수 있음을 보여주었다. X값이 증가함에 따라 결정화 시간은 훨씬 단축되었다. ESR로 측정된 스핀 밀도는 a-Si1-xGex:H 박막이 처음 가열됨에 따라 전체적으로 크게 증가했다가, 결정화가 일어나면서 다시 감소하여 나중에는 거의 변화가 없었다. ESR 신호의 초기 증가는 수소 이탈에 의한 dangling bond의 증가에 기인하며, 다음 단계의 감소 및 안정 상태는 결정화에 따른 결정경계 영역의 감소와 결함들의 안정성에 기인하는 것으로 생각된다. 그러나 흥미로운 것은 Si1-xGex 합금의 경우 가열시간이 증가됨에 따라 Si-db(Si-dangling bond)와 Ge-db에 의한 신호가 서로 분리되어 나타났으며, 이 Si-db 스핀 밀도와 Ge-db 스핀밀도의 변화정도는 x값에 크게 의존함을 보여준 것이다. 즉 순수한 a-Si:H의 경우 Si-db 의 스핀밀도의 증가시간은 4시간 정도였고, 그리고 다시 감소하였으며, x=0.1 인 박막에서 Si-db와 Ge-db의 변화 시간은 순수 S-db 변화의 경우와 거의 유사하였다. 그러나 x=0.5 샘플에서는 Si-db의 변화가 빨라져서 0.1 시간 안에 증가되었고, Ge-db의 변화는 더 빠르게 수 분 동안에 증가 된후 다시 감소하였다. 이것은 수소의 Si에 대한 친화력 뿐 만아니라 Si-H과 Ge-H 결합에너지가 주위 원자들의 구성에 크게 영향받을 수 있는 가능성을 제시해준다.
Journal of the Institute of Convergence Signal Processing
/
v.16
no.2
/
pp.50-55
/
2015
The noise of MRI shooting is 100dB loud and has an intensive psychological and physiological influences on the human body. ECG signals were measured by experimental methods, while wearing earplugs for 15 minutes in the stable state. Then the ECG signals were measured for 30 minutes while listening to about 100dB of sound in a MRI equipment. In this study, the heart rate variability of men and women was analyzed according to the MRI noise stress level through the frequency analysis. As the MRI noise level is about 100dB, HRV analysis resulted in an imbalance between the sympathetic and parasympathetic. During the period from the resting state up to 10 minutes, the maximum stress state was shown. This study will encourage MRI workers to take interests in hearing protection for the patient and to make objective indicators about MRI noises.
Journal of the Korea Academia-Industrial cooperation Society
/
v.9
no.4
/
pp.1059-1066
/
2008
Characteristics of pyrolysis and liquid product distribution of ABS plastics have been studied in the thermogravimetric(TG) reactor and bomb microreactor. Pyrolysis reactions were performed at temperature $400\sim450^{\circ}C$ and yield of each pyrolytic product was obtained by the weight measurement method. The molecular weight distributions of liquid products were determined by the GC-SIMDIS method. It was observed that solid residue which could not be detected in the thermogravimetric experiments was significantly formed in the batch-type microreactor. It was found that the yield and average molecular weight of liquid products were decreased with the increase of reaction temperature and time. but the formation of styrene monomer was significantly increased. The chain-end scission rate parameters were determined to be 54.1kcal/mole far ABS by the Arrhenius plot.
복용량이 비교적 적고, 난용성 의약품(醫藥品)으로 antirheumatism에 사용되고 있는 phenylbutazone을 macromolecule polymer로서 water soluble carrier인 polyvinylpyrrolidone과 solvent method로 1:1, 1:5, 및 1:9(w/w)의 coprecipitate를 형성(形成)시켰으며, 이들 coprecipitate의 용출 속도를 Pure drug 및 coprecipitate 형성 용매인methanol에서 재결정한 recrystallized pure drug의 그것과 측정 비교(比較)하였다. 1:1,1:5 및 1:9(w/w)의 coprecipitate는 recrystallized pure phenylbutazone보다 약 4.5배의 용출의 증가를 보였고, 이들 1:1,1:5,1:9(w/w)에서의 그 carrier의 양(量)에 따른 용출에의 영향은 거의 없었다. 시간(時間)에 대(對)한 log probit를 plot하여 구(求)한 dissolution half life, $T_{50%}$는 coprecipitate ratio 1:1(w/w)에서는 5.5분, 1:5에서는 10분, 1:9에서는 12.5분이었다.
Journal of the Korean Society for Marine Environment & Energy
/
v.12
no.2
/
pp.96-103
/
2009
The biodegradability in water of the artificial baits for blue crab pots which were made of intestines of mackerel, tuna and grinded krill were studied. The biodegradability of artificial bait was evaluated with the effective capacity of 10L water tank which was made of acryl pipe at the velocity of 1m/d and hydraulic retention time of 12 hours. For the 23 days operation time, all artificial baits were degraded fast at the early stage of operation time and stabilized within 5 days after start up. The rates of biodegradation were different depending on the raw materials of artificial baits. In terms of degradation rate of organic matter which can be expressed as COD, artificial bait made of tunas intestine showed the fastest degradation rate. On the other hand, in terms of degradation rate of nitrogenous matter which can be expressed as ammonia nitrogen, artificial bait made of mackerels intestine showed the fastest degradation rate. In order to evaluate the effect of artificial bait on marine ecosystem, seawater qualities including SS, COD, DO, nitrogen, phosphorus were determined depending on depth and location during 2 days test operation period. It is apparent that the effect of artificial bait on seawater quality was negligible when comparing seawater quality of test operation area with control area.
Aromatic hydrocarbons, such as phenol, have been detected frequently in wastewater, soil, and groundwater because of the extensive use of oil products. Bacterial strains (56 isolates) that degraded phenol were isolated from soil and industrial wastewater contaminated with hydrocarbons. GN13, which showed the best cell growth and phenol degradation, was selected for further analysis. The GN13 isolate was identified as Neisseria sp. based on the results of morphological, physiological, and biochemical taxonomic analyses and designated as Neisseria sp. GN13. The optimum temperature and pH for phenol removal of Neisseria sp. GN13 was $32^{\circ}C$ and 7.0, respectively. The highest cell growth occurred after cultivation for 30 hours in a jar fermentor using optimized medium containing 1,000 mg/l of phenol as the sole carbon source. Phenol was not detected after 27 hours of cultivation. Based on the analysis of catechol dioxygenase, it seemed that catechol was degraded through the meta- and ortho-cleavage pathway. Analysis of the biodegradation of phenol by Neisseria sp. GN13 in artificial wastewater containing phenol showed that the removal rate of phenol was 97% during incubation of 30 hours. The removal rate of total organic carbon (TOC) by Neisseria sp. GN13 and activated sludge was 83% and 78%, respectively. The COD removal rate by Neisseria sp. GN13 from petrochemical wastewater was about 1.3 times higher than that of a control containing only activated sludge.
Supercritical water oxidation (SCWO, P>221 bar, T>$374^{\circ}C$) is a promising method for the decomposition of refractory organic compounds. In this study, the SCWO of Ethylenediaminetetraacetic acid (EDTA) was carried out in a tubular-type continusous reactor system with an $H_2O_2$ oxidant at $387-500^{\circ}C$, 250 bar and residence time (RT) of 15.9-88.9 s. The decomposition efficiencies increased with increasing temperature and oxidant amount, while it was inversely proportional to feed flow rate. The decomposition efficiency of 99.6% was obtained at $500^{\circ}C$, 250 bar, oxidant amount of 400% and residence time of 40.1 s. The effect of temperature on the decomposition efficiency was more significant than that of oxidant amount. In the case of the decomposition efficiency of 5,000 mg/L of EDTA (3,063 mg/L as $COD_{Cr}$), the decompostion of 99% or higher was obtained at the condition of over 40.1 s (RT) and 200 stoichiometric % of $H_2O_2$ in the supercritical water of $500^{\circ}C$ and 250 bar.
Journal of the korean academy of Pediatric Dentistry
/
v.32
no.3
/
pp.454-460
/
2005
The purpose of study was to observe the effect of calcium and citric acid on the dental erosion of human premolar enamel. Enamel specimens were demineralized in 0.1%, 0.3%, 0.5%, or 1.0% citric acid solutions with 0.05%, 0.1%, or 0.2% calcium for 5, 15, 30, and 60 minutes, and then the surface microhardness of the enamel was measured. The hardness decreased as the concentration of citric acid and the demineralization time increased. Hardness after 5 minutes was 76~90% in case of no calcium and the inhibition of dental erosion by calcium addition was 2??15%. Hardness after 15 minutes was 65~84% in case of no calcium and the inhibition of dental erosion by calcium addition was 3~17%. Hardness after 30 minutes was 53~72% in case of no calcium and the inhibition of dental erosion by calcium addition was 6~22%. Hardness after 60 minutes was 43~66% in case of no calcium and the inhibition of dental erosion by calcium addition was 7~19%. The inhibition was the highest in 1.0% citric acid and 0.2% calcium. In 0.1% citric acid the inhibition increased as the demineralization time increased, but in 0.3% to 1.0% citric acid the inhibition was most high at 30 minutes and decreased a little at 60 minutes. These results suggest that calcium has a inhibitory effect on the citric acid induced dental erosion.
Background: As a physiologic plasminogen activator, tissue-type plasminogen activator (t-PA) could induce effective thrombolysis in massive pulmonary embolism, without the risk of systemic hemorrhage. However, therapeutic doses of t-PA has been associated with systemic lytic state, and fibrin selectivity may be influenced by the dosing regimen of t-PA. To investigate the effects of duration of t-PA infusion on blood coagulation system, we performed this study. Method: In a canine model of pulmonary embolism, which was induced by injection of autologous blood clots, we administered equal doses of t-PA (1 mg/kg) over 15 minutes in $t-PA_{15}$ group, over 180 minutes in $t-PA_{180}$ group, and only saline in control group. Then serial blood samplings were made to check complete blood count, prothrombin time, activated partial thromboplastin time, thrombin time, fibrin, plasminogen, ${\alpha}_2$-antiplasmin, coagulation factor V and VIII, and fibrin(ogen) degradation products. Results: 1) In all 3 groups, complete blood count showed same changes. Hemoglobin, hematocrit and platelet count decreased, but WBC count increased. 2) Prothrombin time, activated partial thromboplastin time, and thrombin time were prolonged during 15-60 minutes after t-PA administration in $t-PA_{15}$ group, and from 30 minutes through 180 minutes after administration in $t-PA_{180}$ gorup. 3) Fibrin, ${\alpha}_2$-antiplasmin, and cogulation factor V and VIII decreased in both $t-PA_{15}$ and $t-PA_{180}$ group, but returned to basal levels earlier in $t-PA_{15}$ group. 4) Fibrin(ogen) degradation products increased after pulmonary embolism in all groups, and further increased in both $t-PA_{15}$ and $t-PA_{180}$ groups after t-PA infusion. But more pronounced increment was noted in $t-PA_{180}$ gorup. Conclusion: In pulmonary embolism, the shorter (15 minutes) infusion of t-PA would have less risk of systemic hemorrhage than the longer (180 minutes) infusion when the doses is equal. And, this suggests that manipulating the duration of t-PA infusion can reduce the risk of major bleeding.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.