• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.182.1-182.1
• /
• 2013

Silver (Ag)는 높은 반사율을 가지고 있어 Top-Emission Organic Light Emitting Diode (T-OLED)의 반사전극으로 사용하기 적합하지만 일함수가 낮은 단점 (4.3 eV)을 가지고 있다. 이런 낮은 일함수를 증가시키기 위하여 Ag 박막 표면을 산화시켜 일함수를 증가시키기 위한 연구가 진행중에 있으며, 이 연구에서는 UV로 $O_3$을 발생시켜 Ag 박막 표면을 산화시키기 위한 연구를 진행하였다. 특히, Ag 박막 표면의 일함수 변화를 측정하기 위하여 SPM (Scanning Probe Microscopy)의 KPFM (Kelvin Probe Force Microscopy) mode를 적용하여 nano 영역에서의 일함수 변화를 surface potential로 측정하여 UV 표면 산화에 의한 표면 일함수 형상을 확인하였다. Ag 박막은 rf magnetron sputter를 사용하여, Si 기판위에 300nm 두께로 증착시켰다. 이후 $O_3$ 발생되는 UV 램프로 Ag 박막 표면 30초 간격으로 최대 5분간 산화시켰으며, 이후 KPFM mode를 사용하여 산화 시간에 따른 Ag 박막 표면의 potential 변화를 측정하였다. 0~3분간 산화된 Ag 박막 표면의 potential은 약 6 mV로 일정하였으나 3분 이후 최대 110 mV까지 급격하게 변화하는 것을 확인할 수 있었다. Ag 박막 표면의 RMS roughness는 UV 산화처리 전0.7 nm였으나, potential이 급격하게 증가하는 시점인 3분 이후 2.83 nm로 약 400% 이상 증가하였다. 이를 통해 $O_3$ 발생 UV 램프로 산화된 Ag 박막의 표면 물성은 처리 시간에 따라 급격히 변하는 것을 확인하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.64-64
• /
• 1999

다결정 실리콘-게르마늄(poly-SiGe)은 태양전지 및 TFT-LCD와 같은 소자 응용에 있어서 중요하게 연구되고 있는 물질이다. 우리는 수소화된 비정질 실리콘-게르마늄 (a-Si1-xGex:H) 박막을 증착시키고 고상결정화시키며 XRD(x-ray diffraction) 및 ESR (electron spin resonance) 측정을 수행하였다. PECVD 증착가스는 SiH4과 GeH4가스를 사용하였고 Ge의 성분비는 x=0.0, 0.1, 0.5 정도로 조절되었다. 기판은 Corning 1737 glass를 사용하였고, 기판 온도는 20$0^{\circ}C$ 이었다. 증착압력과 r.f. 전력은 각각 0.6Torr와 3W이었다. 증착된 SiGe 박막은 고상결정화를 위해 $600^{\circ}C$ N2 분위기에서 가열되고, 그에 따른 XRD 및 ESR spectrum의 변화를 관찰하였다. ESR 측정은 X-band 그리고 상온에서 행해졌다. 먼저 XRD 측정으로부터 박막의 고상결정화 정도를 알 수 있었고, 고상결정화 과정이 초기 핵형성 단계와 결정화 단계, 그리고 더 이상 결정화가 일어나지 않는 완료 단계로 구분될 수 있음을 보여주었다. X값이 증가함에 따라 결정화 시간은 훨씬 단축되었다. ESR로 측정된 스핀 밀도는 a-Si1-xGex:H 박막이 처음 가열됨에 따라 전체적으로 크게 증가했다가, 결정화가 일어나면서 다시 감소하여 나중에는 거의 변화가 없었다. ESR 신호의 초기 증가는 수소 이탈에 의한 dangling bond의 증가에 기인하며, 다음 단계의 감소 및 안정 상태는 결정화에 따른 결정경계 영역의 감소와 결함들의 안정성에 기인하는 것으로 생각된다. 그러나 흥미로운 것은 Si1-xGex 합금의 경우 가열시간이 증가됨에 따라 Si-db(Si-dangling bond)와 Ge-db에 의한 신호가 서로 분리되어 나타났으며, 이 Si-db 스핀 밀도와 Ge-db 스핀밀도의 변화정도는 x값에 크게 의존함을 보여준 것이다. 즉 순수한 a-Si:H의 경우 Si-db 의 스핀밀도의 증가시간은 4시간 정도였고, 그리고 다시 감소하였으며, x=0.1 인 박막에서 Si-db와 Ge-db의 변화 시간은 순수 S-db 변화의 경우와 거의 유사하였다. 그러나 x=0.5 샘플에서는 Si-db의 변화가 빨라져서 0.1 시간 안에 증가되었고, Ge-db의 변화는 더 빠르게 수 분 동안에 증가 된후 다시 감소하였다. 이것은 수소의 Si에 대한 친화력 뿐 만아니라 Si-H과 Ge-H 결합에너지가 주위 원자들의 구성에 크게 영향받을 수 있는 가능성을 제시해준다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.2
• /
• pp.50-55
• /
• 2015

The noise of MRI shooting is 100dB loud and has an intensive psychological and physiological influences on the human body. ECG signals were measured by experimental methods, while wearing earplugs for 15 minutes in the stable state. Then the ECG signals were measured for 30 minutes while listening to about 100dB of sound in a MRI equipment. In this study, the heart rate variability of men and women was analyzed according to the MRI noise stress level through the frequency analysis. As the MRI noise level is about 100dB, HRV analysis resulted in an imbalance between the sympathetic and parasympathetic. During the period from the resting state up to 10 minutes, the maximum stress state was shown. This study will encourage MRI workers to take interests in hearing protection for the patient and to make objective indicators about MRI noises.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.1059-1066
• /
• 2008

Characteristics of pyrolysis and liquid product distribution of ABS plastics have been studied in the thermogravimetric(TG) reactor and bomb microreactor. Pyrolysis reactions were performed at temperature $400\sim450^{\circ}C$ and yield of each pyrolytic product was obtained by the weight measurement method. The molecular weight distributions of liquid products were determined by the GC-SIMDIS method. It was observed that solid residue which could not be detected in the thermogravimetric experiments was significantly formed in the batch-type microreactor. It was found that the yield and average molecular weight of liquid products were decreased with the increase of reaction temperature and time. but the formation of styrene monomer was significantly increased. The chain-end scission rate parameters were determined to be 54.1kcal/mole far ABS by the Arrhenius plot.

• Journal of Pharmaceutical Investigation
• /
• v.5 no.4
• /
• pp.17-23
• /
• 1975

복용량이 비교적 적고, 난용성 의약품(醫藥品)으로 antirheumatism에 사용되고 있는 phenylbutazone을 macromolecule polymer로서 water soluble carrier인 polyvinylpyrrolidone과 solvent method로 1:1, 1:5, 및 1:9(w/w)의 coprecipitate를 형성(形成)시켰으며, 이들 coprecipitate의 용출 속도를 Pure drug 및 coprecipitate 형성 용매인methanol에서 재결정한 recrystallized pure drug의 그것과 측정 비교(比較)하였다. 1:1,1:5 및 1:9(w/w)의 coprecipitate는 recrystallized pure phenylbutazone보다 약 4.5배의 용출의 증가를 보였고, 이들 1:1,1:5,1:9(w/w)에서의 그 carrier의 양(量)에 따른 용출에의 영향은 거의 없었다. 시간(時間)에 대(對)한 log probit를 plot하여 구(求)한 dissolution half life, $T_{50%}$는 coprecipitate ratio 1:1(w/w)에서는 5.5분, 1:5에서는 10분, 1:9에서는 12.5분이었다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.2
• /
• pp.96-103
• /
• 2009

The biodegradability in water of the artificial baits for blue crab pots which were made of intestines of mackerel, tuna and grinded krill were studied. The biodegradability of artificial bait was evaluated with the effective capacity of 10L water tank which was made of acryl pipe at the velocity of 1m/d and hydraulic retention time of 12 hours. For the 23 days operation time, all artificial baits were degraded fast at the early stage of operation time and stabilized within 5 days after start up. The rates of biodegradation were different depending on the raw materials of artificial baits. In terms of degradation rate of organic matter which can be expressed as COD, artificial bait made of tunas intestine showed the fastest degradation rate. On the other hand, in terms of degradation rate of nitrogenous matter which can be expressed as ammonia nitrogen, artificial bait made of mackerels intestine showed the fastest degradation rate. In order to evaluate the effect of artificial bait on marine ecosystem, seawater qualities including SS, COD, DO, nitrogen, phosphorus were determined depending on depth and location during 2 days test operation period. It is apparent that the effect of artificial bait on seawater quality was negligible when comparing seawater quality of test operation area with control area.

• Journal of Life Science
• /
• v.23 no.10
• /
• pp.1273-1279
• /
• 2013

Aromatic hydrocarbons, such as phenol, have been detected frequently in wastewater, soil, and groundwater because of the extensive use of oil products. Bacterial strains (56 isolates) that degraded phenol were isolated from soil and industrial wastewater contaminated with hydrocarbons. GN13, which showed the best cell growth and phenol degradation, was selected for further analysis. The GN13 isolate was identified as Neisseria sp. based on the results of morphological, physiological, and biochemical taxonomic analyses and designated as Neisseria sp. GN13. The optimum temperature and pH for phenol removal of Neisseria sp. GN13 was $32^{\circ}C$ and 7.0, respectively. The highest cell growth occurred after cultivation for 30 hours in a jar fermentor using optimized medium containing 1,000 mg/l of phenol as the sole carbon source. Phenol was not detected after 27 hours of cultivation. Based on the analysis of catechol dioxygenase, it seemed that catechol was degraded through the meta- and ortho-cleavage pathway. Analysis of the biodegradation of phenol by Neisseria sp. GN13 in artificial wastewater containing phenol showed that the removal rate of phenol was 97% during incubation of 30 hours. The removal rate of total organic carbon (TOC) by Neisseria sp. GN13 and activated sludge was 83% and 78%, respectively. The COD removal rate by Neisseria sp. GN13 from petrochemical wastewater was about 1.3 times higher than that of a control containing only activated sludge.

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.318-323
• /
• 2005

Supercritical water oxidation (SCWO, P>221 bar, T>$374^{\circ}C$) is a promising method for the decomposition of refractory organic compounds. In this study, the SCWO of Ethylenediaminetetraacetic acid (EDTA) was carried out in a tubular-type continusous reactor system with an $H_2O_2$ oxidant at $387-500^{\circ}C$, 250 bar and residence time (RT) of 15.9-88.9 s. The decomposition efficiencies increased with increasing temperature and oxidant amount, while it was inversely proportional to feed flow rate. The decomposition efficiency of 99.6% was obtained at $500^{\circ}C$, 250 bar, oxidant amount of 400% and residence time of 40.1 s. The effect of temperature on the decomposition efficiency was more significant than that of oxidant amount. In the case of the decomposition efficiency of 5,000 mg/L of EDTA (3,063 mg/L as $COD_{Cr}$), the decompostion of 99% or higher was obtained at the condition of over 40.1 s (RT) and 200 stoichiometric % of $H_2O_2$ in the supercritical water of $500^{\circ}C$ and 250 bar.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.454-460
• /
• 2005

The purpose of study was to observe the effect of calcium and citric acid on the dental erosion of human premolar enamel. Enamel specimens were demineralized in 0.1%, 0.3%, 0.5%, or 1.0% citric acid solutions with 0.05%, 0.1%, or 0.2% calcium for 5, 15, 30, and 60 minutes, and then the surface microhardness of the enamel was measured. The hardness decreased as the concentration of citric acid and the demineralization time increased. Hardness after 5 minutes was 76~90% in case of no calcium and the inhibition of dental erosion by calcium addition was 2??15%. Hardness after 15 minutes was 65~84% in case of no calcium and the inhibition of dental erosion by calcium addition was 3~17%. Hardness after 30 minutes was 53~72% in case of no calcium and the inhibition of dental erosion by calcium addition was 6~22%. Hardness after 60 minutes was 43~66% in case of no calcium and the inhibition of dental erosion by calcium addition was 7~19%. The inhibition was the highest in 1.0% citric acid and 0.2% calcium. In 0.1% citric acid the inhibition increased as the demineralization time increased, but in 0.3% to 1.0% citric acid the inhibition was most high at 30 minutes and decreased a little at 60 minutes. These results suggest that calcium has a inhibitory effect on the citric acid induced dental erosion.

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.5
• /
• pp.474-482
• /
• 1993

Background: As a physiologic plasminogen activator, tissue-type plasminogen activator (t-PA) could induce effective thrombolysis in massive pulmonary embolism, without the risk of systemic hemorrhage. However, therapeutic doses of t-PA has been associated with systemic lytic state, and fibrin selectivity may be influenced by the dosing regimen of t-PA. To investigate the effects of duration of t-PA infusion on blood coagulation system, we performed this study. Method: In a canine model of pulmonary embolism, which was induced by injection of autologous blood clots, we administered equal doses of t-PA (1 mg/kg) over 15 minutes in $t-PA_{15}$ group, over 180 minutes in $t-PA_{180}$ group, and only saline in control group. Then serial blood samplings were made to check complete blood count, prothrombin time, activated partial thromboplastin time, thrombin time, fibrin, plasminogen, ${\alpha}_2$-antiplasmin, coagulation factor V and VIII, and fibrin(ogen) degradation products. Results: 1) In all 3 groups, complete blood count showed same changes. Hemoglobin, hematocrit and platelet count decreased, but WBC count increased. 2) Prothrombin time, activated partial thromboplastin time, and thrombin time were prolonged during 15-60 minutes after t-PA administration in $t-PA_{15}$ group, and from 30 minutes through 180 minutes after administration in $t-PA_{180}$ gorup. 3) Fibrin, ${\alpha}_2$-antiplasmin, and cogulation factor V and VIII decreased in both $t-PA_{15}$ and $t-PA_{180}$ group, but returned to basal levels earlier in $t-PA_{15}$ group. 4) Fibrin(ogen) degradation products increased after pulmonary embolism in all groups, and further increased in both $t-PA_{15}$ and $t-PA_{180}$ groups after t-PA infusion. But more pronounced increment was noted in $t-PA_{180}$ gorup. Conclusion: In pulmonary embolism, the shorter (15 minutes) infusion of t-PA would have less risk of systemic hemorrhage than the longer (180 minutes) infusion when the doses is equal. And, this suggests that manipulating the duration of t-PA infusion can reduce the risk of major bleeding.