• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.509-516
• /
• 2014

CRC feature in a high-speed semiconductor memory devices such as DDR4/GDDR5 increases the data reliability. Conventional CRC method have a massive area overhead and long delay time. It leads to insufficient internal timing margins for CRC calculation. This paper, presents a CRC code method that provides error detection and a real-time matrix type CRC. If there are errors in the data, proposed method can alert to the system in a real-time manner. Compare to the conventional method(XOR 6 stage ATM-8 HEC code), the proposing method can improve the error detection circuits up to 60% and XOR stage delay by 33%. Also the real-time error detection scheme can improve the error detection speed to agerage 50% for the entire data bits(UI0~UI9).

• Journal of Preventive Medicine and Public Health
• /
• v.24 no.4 s.36
• /
• pp.507-515
• /
• 1991

One, two, six and ten week old Sprague-Dawley rats were exposed to carbon monoxide at 3,700 ppm for 30 minutes, and carboxyhemoglobin was measured immediateley. 5, 30, 60, 90, 120 minutes after the exposure. In each time after the exposure, the means of the carboxyhemoglobin levels were compared among the week age groups. The regression analysis was done using the natural logarithm of the carboxyhemoglobin concentration as a dependent variable and the time after the exposure as an independent vaiable. From the regression equation, the half lives of the carboxyhemoglobin were calculated. The one week old rats showed significantly higher carboxyhemoglobin level than other week age rats in the entire time after the exposure. The corrected carboxyhemoglobin concentration calculated by subtracting the normal carboxyhemoglobin level from the measured carboxyhemoglobin at each age group, showed no uniform differences.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.5
• /
• pp.425-433
• /
• 2012

Dijkstra's algorithm is one of well-known methods to find shortest paths over a network. However, more research on $A^*$ algorithm is necessary to discover the shortest route to a goal point with the heuristic information rather than Dijkstra's algorithm which aims to find a path considering only the shortest distance to any point for an optimal path search. Therefore, in this paper, we compared Dijkstra's algorithm and $A^*$ algorithm for bicycle route selection. For this purpose, the horizontal distance according to slope angle and average speed were calculated based on factors which influence bicycle route selection. And bicycle routes were selected considering the shortest distance or time-dependent shortest path using Dijkstra's or $A^*$ algorithm. The result indicated that the $A^*$ algorithm performs faster than Dijkstra's algorithm on processing time in large study areas. For the future, optimal path selection algorithm can be used for bicycle route plan or a real-time mobile services.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.5-12
• /
• 2006

This study was conducted to investigate the effect of operational parameters such as dosage of magnesium and phosphate, pH, reaction time and existence crystal core for the removal of nitrogen and phosphorus in anaerobic fermentation supernatant by struvite crystallization. Optimal mole ratio of $Mg^{2+}:NH_4{^+}:PO_4{^{3-}}$ was 1.2:1.0:1.2. Under the optimal molar ratio, removal ratio and reaction rate constant of $NH_4{^+}-N$ and $PO_4{^{3-}}-P$ were 79.2, 96.8%, 0.157 and $0.344min^{-1}$, respectively. Optimal pH and reaction time were 11 and 10 minutes, respectively, in the optimal molar ratio. Residual concentration of $NH_4{^+}-N$ and $PO_4{^{3-}}-P$ showed lowest value with 1 g/L of crystal core addition. SEM analysis of struvite crystallization with crystal core showed higher crystal core growth than that of without crystal core. Struvite precipitate proved to be orthorhomic crystal structure by XRD analysis.

• Journal of KIISE
• /
• v.43 no.9
• /
• pp.1060-1065
• /
• 2016

Recently, there is an emerging need for parallel UHD video processing, and the usage of computing systems that have an asymmetric processor such as ARM big.LITTLE is actively increasing. Thus, a new parallel UHD video processing method that is optimized for the asymmetric multicore systems is needed. This paper proposes a novel HEVC tile partitioning method for parallel processing by analyzing the computational power of asymmetric multicores. The proposed method analyzes (1) the computing power of asymmetric multicores and (2) the regression model of computational complexity per video resolution. Finally, the model (3) determines the optimal HEVC tile resolution for each core and partitions/allocates the tiles to suitable cores. The proposed method minimizes the gap in the decoding time between the fastest CPU core and the slowest CPU core. Experimental results with the 4K UHD official test sequences show average 20% improvement in the decoding speedup on the ARM asymmetric multicore system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.195-200
• /
• 2008

To compress the moving picture data effectively, it is needed to reduce spatial and temporal redundancy of input image data. While motion estimation! compensation methods is effectively able to reduce temporal redundancy but it is increased computation complexity because of the prediction between frames. So, the study of algorithm for computation reduction and real time processing is needed. This paper is presenting quantizer effectively able to quantize DCT coefficient considering the human visual sensitivity. As quantizer that proposed DCT-based H.263 could make transmit more frame than TMN5 at a same transfer speed, and it could decrease the frame drop effect. And the luminance signal appeared the difference of $-0.3{\sim}+0.65dB$ in the average PSNR for the estimation of objective image quality and the chrominance signal appeared the improvement in about 1.73dB in comparision with TMN5. The proposed method reduces $30{\sim}31%$ compared with NTSS and $20{\sim}21%$ compared to 4SS in comparition of calculation quantity.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.150.1-150
• /
• 2003

열무의 안전한 생산을 위한 생산단계에서의 각 농약 잔류량 변화 추이와 최종 소비단계에서의 농산물 안전성 평가자료로 활용하기 위하여 실제 시험포장에 열무를 파종한 후 수확 10일 전에 4 종(diazinon, endosulfan, cypermethrin, cyhalothrin)의 살충제를 각 성분별로 안전사용 기준에 따라 기준량 및 배량의 처리구에 직접 살포하여 열무의 포장상태에서의 잔류량 감소(생물학적 반감기) 변화를 조사하였다. 각 농약별로 2 수준 농도의 표준물질을 첨가하여 실험한 결과 평균회수율은 diazinon 98.7∼99.9%, endosulfan 97.6∼98.5%, cypermethrin 98.3∼99.6%, cyhalothrin 98.4∼99.1%이였고, 검출한계는 diazinon 및 cypermethrin은 0.04 mg/kg, endosulfan은 0.012 mg/kg, cyhalothrin은 0.01 mg/kg 이었다. 약제 살포 후 분해속도가 빠른 성분은 diazinon ＞ endosulfan ＞ cypermethrin ＞cyhalothrin 순이었다. 작물체(열무)내에서 시간의 경과에 따른 잔류량의 변화를 1차 반응으로 표현하여 농약 4종의 살포농도별 생물학적 반감기를 산출한 결과, 기준량 살포의 경우 diazinon 0.9일, endosulfan 2.0일, cypermethrin 2.2일, cyhalothrin 2.5일 그리고 배량 살포의 경우에는 diazinon 1.1일, endosulfan 2.0일, cypermethrin 2.1일, cyhalothrin 2.2일로 나타났다. 안전한 농산물 생산을 위한 열무 중 약제 살포 후 수확일은 잔류허용기준(MRL)을 적용시킬 경우 기준량으로 볼 때 diazinon은 6일 후, endosulfan은 10일 후에 수확하는 것이 바람직한 것으로 나타났으며 합성 피레스로이드계인 cypermethrin과 cyhalothrin은 농약살포 후 2 시간 후에 농약 잔류량이 잔류허용기준 미만으로 나타났다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.3
• /
• pp.61-67
• /
• 2017

In this study, Burning Area Analysis Program (BAAP) was developed by using VOF method to estimate the burning area of 3D shaped grain. The parametric study of mesh size, burning rate and time interval for numerical calculation was conducted. The result of BAAP is compared with the one from commercial 3D modeling software. Also the internal ballistic analysis was performed using the result of BAAP. In order to estimate the burning area and internal pressure with time, Chemical Equilibrium Analysis (CEA) was conducted with a composition of reduced smoke propellant. As a result, the web-averaged pressure was 5.34 MPa which is similar to the published research result.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.3
• /
• pp.93-105
• /
• 2008

This study was for the analysis of Kinematic variables, using 3 types of starting block position setting(25cm, 40cm, 35cm). The subjects of the study were 8 short-distance male runners. In the study, the most desirable block setting type for the runner who were average 180cm tall to get the good record was 45cm (distance between the starting line and the front block) and 40cm (distance between the blocks). In conclusion, the most favorable start in 100m race was to get the strongest propelling power at the start line. The most important technical point was quick responding ability to the start signal and reaching the maximum speed at the shortest time through the strong kick using the front leaning body angle and gravity. Type B start method has shown the most effective results for the improvement of the records in the 100m race.

• Korean Journal of Food Science and Technology
• /
• v.16 no.3
• /
• pp.314-318
• /
• 1984

Rheological properties of gelatinized chestnut starch solution were investigated with a narrow gap rotational viscometer. The starch solutions at 1.2-1.8% concentration showed pseudoplastic behaviour with yield stress. At higher concentrations (1.65 and 1.8%), the starch solution showed more pseudoplastic tendency and time-dependent characteristics. Values of yield stress were small and independent of concentrations 1.2, 1.35 and 1.5%. Significant increase of yield stress was observed at 1.65% concentration. Consistency index was exponentially dependent on concentration and temperature. The activation energy for 1.65% starch solution was about 5 Kcal/g.mol.