• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.7
• /
• pp.435-440
• /
• 2016

Effects of the increase rate of Reynold number on near-wall turbulent structures are investigated by performing direct numerical simulations of transient turbulent channel flows. The simulations were started with the fully-developed turbulent channel flow at $Re_{\tau}=180$, then temporal accelerations were applied. During the acceleration, the Reynolds number, based on the channel width and the bulk mean velocity, increased almost linearly from 5600 to 13600. To elucidate the effects of flow acceleration rates on near-wall turbulence, a wide range of durations for acceleration were selected. Various turbulent statistics and instantaneous flow fields revealed that the rapid increase of flow rate invoked bypass-transition like phenomena in the transient flow. By contrast, the flow evolved progressively and the bypass transition did not clearly occur during mild flow acceleration. The present study suggests that the transition to the new turbulent regime in transient channel flow is mainly affected by the flow acceleration rate, not by the ratio of the final and initial Reynolds numbers.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.543-546
• /
• 2017

Test equipment was designed and manufactured to evaluate thermal reaction characteristic of internal insulators of solid rocket motor. Test is allowed up to chamber pressure 2,500 psi, burn-time 40 s. It is possible to observe and to compare thermal reaction characteristic for a few materials simultaneously, under the condition that the ablation occurs. In efficient average chamber pressure 878 psi, efficient burn-time 10.7 s and gas velocity 100 m/s, test was executed for confirming safety of equipment, being 4 test materials inserted simultaneously. Basic data for understanding thermal characteristic of internal insulator, that is, pressure-time curve, temperature-time curve in the test sample, and thermal destruction depth of test samples was gained successfully.

• Asian Journal of Turfgrass Science
• /
• v.18 no.4
• /
• pp.179-191
• /
• 2004

This study was conducted to find out the effect of sodding and seeding time and rate of seed mixtures on the establishment of cool-season turfgrasses by evaluating the turf coverage rates for two years. In fall planting, the required establishment period of full coverage($100\%$) was 1.5 months with a rolled turf sodding(Kentucky bluegrass $100\%$, Kentucky bluegrass $80\%$+perennial ryegrass $20\%$). The $100\%$ turf establishment was achieved in 7 months with Perennial ryegrass $100\%$, and 7.5 months by seeding with Kentucky bluegrass $100\%$(KB 100), Kentucky bluegrass $80\%$+perennial ryegrass $20\%$(KB80+PR20), Kentucky bluegrass $70\%$+perennial ryegrass $30\%$(KB70+PR30). In spring planting, the establishment periods far sod with KB 100 or KB80+PR20 were taken one month. However, in the case of seeding, the establishment periods were 3 months, 3.5 months, 3.5 months and 4 months with PR100, KB80+PR20, KB70+PR30, and KB 100, respectively Comparing the turf establishment vigor between fall and spring planting, the vigor was higher In spring planting than in fall planting in both sodding and . seeding. In the case of spring planting, the most proper time for turf establishment was tested on April, May, and June trials. The effect was significant in establishment vigor. The result showed highest on April planting. On May and June trials, establishment vigors were decreased gradually As the mixture rate of PR increased, ryegrass, establishment vigor was decreased with the rates. These results indicated that perennial ryegrass has relatively less tolerant to summer heat than Kentucky bluegrass. Number of shoots in 95 days after seeding was higher in KB100 by 16,600 per $m^2$ than in PR100 by 12,400 per $m^2$, while the lowest number showed in KB50+PR50 by 3,300 per $m^2$. Those in KB80:PR20, KB70:PR30 were 6,700 and 4,900 per $m^2$, respectively. The ratios of tillers according to mixture rates between Kentucky bluegrass and perennial ryegrass were KB80:PR20=87:13, KB70:PR30=78:22, and KB50:PR50=48:52. According to results in this study, Ideal seeding time might be spring (April) than in fall (September), and proper mixture rate was $80\%$ of Kentucky bluegrass with $20\%$ of perennial ryegrass.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.816-821
• /
• 1997

The hydrodynamics and the liquid flow characteristics were investigated in an internal circulation airlift reactor with a single nozzle as a gas distributor. In an air-water system, the gas holdup in the individual flow zone and the impulse-response curve of tracer were measured at various gas velocities and reactor heights. Experimental results showed that for the higher gas velocity(>about 8 cm/s), the flow behavior of bubbles in the riser was turbulent flow due to strong bubble coalescences and the axial height of dispersion zone of large bubbles having uniform sizes in the downcomer was decreased with increasing gas velocity. And mean gas holdups in the individual flow zone and the reactor were increased with increasing gas velocities and were decreased with increasing heights of the top section of the reactor and it was decreased with increasing the height of the top section and gas velocity. Flow characteristics of liquid in the riser and the downcomer was tend to access to plug flow and the overall flow behavior of liquid was mainly varied with the size of the top section which it was assumed to be perfect mixing zone. In these conditions, liquid circulation velocities were increased with increasing gas velocities and they were higher than those by using other gas distributors.

• Journal of the Korean Geophysical Society
• /
• v.9 no.1
• /
• pp.37-45
• /
• 2006

Velocity structures were defined in the vicinty of the 140-m deep test borehole in the pungam basin through simultaneous inversion of surface seismic refraction and far-ofset VSP traveltime data. Seismicenergy generated at the surface by a seisgun was recorded both at 42 surface locations at 3-m intervalsalong the profiles in the N20E and its orthogonal directions and at 71 m depth in the borehole. Forthe ofset VSP study, seismic energy was generated by a 5 kg sledgehamer at the surface in the horizontal ofset range of -19.5∼+19.5 m from the borehole. The seismic signals were detected at 9∼99 m depths with 1∼2 m intervals and recorded for 204 ms per shot. After shot static corrections,first-arrival times picked from both the surface refraction and borehole records were simultaneouslyinverted to yield velocity tomograms. The tomograms indicate that a 1.5 m thick soil layer with velocities les than 500 m/s overlies basements having a velocity range of 3,067 ∼5,717 m/s. Within the basements,∼4 m and deeper than 71 m. The high-velocit yzones may be due to conglomerates intercalated with sandstones and siltstones. No evidence for large-scale fracture zones or faults is detected near the borehole

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.404-413
• /
• 1995

System parameters (extrusion temperature, extrusion pressure, specific mechanical energy, mean residence time) were analysed on three different screw configurations during twin-screw extrusion of wheat bran. Experiments were conducted over a screw speed of $280{\sim}380\;rpm$, feed rate of $22{\sim}38\;kg/hr$ and moisture content of $17{\sim}33%$ using screws assembled with 3, 4, and 5 reverse screw elements (RSE) adjacent to the heating zone of the barrel. Extrusion temperature increased with increasing RSE but it decreased with increasing feed rate and moisture content. Decreasing the filling ratio of the screw resulted in a lower extrusion pressure, and increasing the length of the RSE gave similar results due to the higher temperature and lower viscosity of melted dough. It was also observed that increasing the feed rate and decreasing moisture content resulted in the reduced extrusion pressure. Specific mechanical energy (SME) decreased when the feed rate and moisture content increased, and SME increased when using RSE posses from 3 to 5. Screw configuration posses with 4 RSE yielded the longest RT, and the smaller the die hole, the higher the RT. In contrast, RT decreased when the feed rate increased. With increasing moisture content RT for 3 RSE increased, but that for 4 and 5 RSE decreased.

• KSBB Journal
• /
• v.16 no.4
• /
• pp.321-326
• /
• 2001

The change of molecular weight inside and outside a capsule produced using coencapsulating technology was investigated. Chitosan and chitosanase were enveloped in this membrane and product released was a loaded the medium by the principle of size exclusion. The leakage of substrate corresponding to the agitation speed was controlled by adjusting the alginate and CaCO$_3$ concentrations. The optimal condition of alginate concentration and agitation speed were 0.5% and 40rpm, respectively. Membrane thickness and capsules diameter were 10 $\mu$m and approx. 3.0 - 1.5 mm, respectively. Molecular weight difference by concentration and alginate viscosity were of little significance. In accordance with the molecular weight distribution versus enzyme concentration relationship, low concentration of enzyme produced high molecular weight oligosaccharides. At a 1.5 mm capsule size the product diffusion rate to outer surface highest. The molecular weight distribution of the released oligosaccharides was ranged from 1000 to 6000 Da. More than 80% of the initial activity of encapsulated enzyme retained after 8hrs of reaction.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.193-199
• /
• 1980

A series of tests were conducted on the reesterification of rice bran oil containing high free fatty acids (acid value=119.7) with theoretical equivalent of glycerol. Test results showed that reaction rate (in terms of decrease in acid value) was increased as the reaction temperature was increased regardless of the presence of the catalyst and reaction time (42.7, 21.5 and 10.0 at $170^{\circ}C,\;210^{\circ}C\;and\;250^{\circ}C$, respectively) and as the reaction time was increased regardless of the temperature and the presence of the catalyst (31.1 vs 18.3 for 3 hrs vs 6 hrs). The presence of the catalyst (0.2% tin chloride) also accelerated the rate regardless of the reaction temperature and time (36.9 vs 12.5). Analysis by column chromatography showed that content of triglyceride in the oil was increased to 72.9% and 61.1% from 10.4% and content of free fatty acids in the oil was decreased to 1.4% and 6.1% from 60.2%, when the degummed oil was esterified at $250^{\circ}C$ for 6 hrs in the presence of and in the absence of the catalyst, respectively. The results estimated from the iodine values indicate that polymer formation was not significant, when the oil was esterified for 6 hrs at temperatures up to $210^{\circ}C$. However, it was somewhat significant for the oil esterified at $250^{\circ}C$ for 6 hrs. The catalyst did not affect the polymer formation. Analysis by high performance liquid chromatography showed that oleic acid (42.5%), linoleic acid (29.0%) and palmitic acid (20.3%) were the major fatty acid components of the rice bran oil.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.4
• /
• pp.416-423
• /
• 2013

Germination is controlled by internal factors of seeds and external factors such as water, temperature and light. We investigated the relationship between germination characteristics of four waxy rice cultivars and patterns of water uptake, antioxidant enzymes and free soluble sugars during early imbibition. Seed viabilities by tetrazolium test of four different rice cultivars were higher than 95% and germination rates of the hulled rice seeds were on 95% average. However, germination rate of intact rice among four cultivars showed a big difference depending on temperature. Water uptake of hulled and intact rice seeds during imbibition reached a stationary phase at around 30% moisture content. Although rates of water uptake were faster in hulled rice and high temperature than intact rice and low temperature condition, difference of those among cultivars was greater under low temperature than high temperature. The time required for rice seeds to uptake 30% water was negatively correlated with percentage of germination, germination energy, germination speed and mean germination time. Guaiacol peroxidase activity at 24h of imbibition was correlated with germination energy and germination speed but not percentage of germination. Catalase activity, soluble protein and maltose concentration at 24h of imbibition were not correlated with characteristics of germination. These results suggest that a time required for rice seeds to uptake 30% of water significantly correlated with germination and guaiacol peroxidase activity during early imbibition plays an important role in initiation of germination.

• Journal of Chest Surgery
• /
• v.34 no.10
• /
• pp.754-762
• /
• 2001

Background: To evaluate the efficacy of arterial switch operation for transposition of great arteries, serial echocardiographic studies were performed in 8 patients who underwent the surgery between 1989 and 1998 at Dept. of Thoracic & Cardiovascular Surgery, Yeungnam University Hospital in Daegu City, Korea. Material and Method: Follow-up period ranged from 6 months to 11 years(average of 4.1 years). Body weight ranged from 2.6kg to 4.8kg, with average of 3.6kg. 5 of 8 patients were preoperatively diagnosed as TGA+VSD, and 3 as TGA+IVS. LV function was evaluated by the measurement of LV shortening fraction, LVSTI, and LVEF. RVSTI was also measured. Postoperative function of valve and growth of great vessels were analyzed by the measurement of PSPGV, valvular regurgitation, LA/AO ratio, root dimension of aorta and pulmonary artery, comparing with the age matched controls, respectively. Result: LVEF had an average of 65.0+9.03% which is tended to increase serially. LVAOPG had an average of 15.9mmHg. RVPAPG, 27.5mmHg. From the measurement of aortic root dimension of 6 patients at end-systole, aortic root growth was assumed to increase more than the mean value of normal growth. PA root dimension at end-systole showed a similar growth progress when compared with age matched normal controls. Postoperative pulmonic valve regurgitation was noted in 5 of total 8 patients, in which 1 patient who showed grade 2 and 4 showed below grade 1. AR, in 6 patients and all grade 1 Except 1 patient, all the valvular regurgitations were below grade 1, which was presumed to be clinically insignificant.