• Annual Conference of KIPS
• /
• 2004.05a
• /
• pp.1095-1098
• /
• 2004

IP VPN의 사용은 현재 보편화 되었고 네트워크 장비의 통합 추세에 따라 IP VPN과 방화벽 통합제품의 생산이 활발히 이루어지고 있다. 통합 보안 제품은 비용 효율성과 관리의 편리성, 확장성, 유연성과 같은 장점을 제공하지만 높은 성능 지원을 요구한다. 방화벽의 성능 인자의 하나로서 정책의 개수는 그 수에 비례하여 검색 시간이 지연되는 문제를 발생시키고, 이러한 성능 저하 문제는 VPN과 통합 시 더욱 가중된다. 더욱이 차세대 네트워크인 IPv6로 환경에서는 IP의 비트수가 증가하여 검색 성능 문제 해결이 필수적으로 요구된다. 본 논문에서는 이러한 통합 제품의 검색 성능 문제에 관한 해결 방안으로 IPv6 주소의 특성을 사용한 메커니즘을 제안한다. 제시한 메커니즘은 보안 정책 테이블의 주소 필드를 IPv6 주소에 포함된 인터페이스 식별자로 대체하여 보안 정책 테이블의 검색 속도를 향상시키는 방법이다. 이 방법은 차세대 네트워크 환경에서 주목 되고 있는 보안 및 성능 문제에 대해 큰 역할을 할 것으로 기대된다.

• The Journal of the Korea Contents Association
• /
• v.21 no.1
• /
• pp.139-146
• /
• 2021

Ahead of the commercialization of autonomous vehicles, it's application should be considered into the current transportation infrastructure. Under limited traffic circumstances, effective set of lane change rules alone could bring benefits to the autonomous driving system. In this study, a cooperative movement (local platooning) plan with limited vehicles associated as pocket driving, aiming at effective movement between vehicles in urban environment was proposed. Under congested roadway condition, the gaussian gap between vehicles was introduced to secure gap acceptance for safe lane change maneuver. Proposed lane change method showed 86.6% delay reduction along with traffic volume improvement. This result could be considered as a crucial factor in designing a next-generation roadway infrastructure with autonomous driving.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.343-343
• /
• 2023

식생피복(Vegetation cover)은 대기 중의 강우와 토양 사이에서 침식으로부터 표토를 보호하는 역할을 한다. 자유 낙하하는 강우의 물방울은 식생을 통과하면서 차단(interception), 수관통과(throughfall), 수간유하(stemflow)의 형태로 변화한다. 식생은 강우입자의 운동에너지와 수량을 감소시키고, 지표면에 도달하는 시간을 지연시킴에 따라 지표유출(overland flow) 저감에 기여한다. 유출수의 흐름과정에서 식물의 줄기, 낙엽, 뿌리 등은 유속을 감소시키는 장애물로 작용하여 궁극적으로 토양침식은 감소한다. 토양침식은 식생피복이 증가함에 따라 일반적으로 감소하며, 지수함수의 관계를 갖는다. 식생의 종류와 구조 그리고 잎의 모양 등에 따라 수문물리적인 반응이 달라진다. 캐노피를 갖는 지상식물(canopy cover plant)은 물방울의 운동에너지를 갖는 반면, 지피식물(ground cover plant)은 낙하고가 작기 때문에 운동에너지는 적으며, 특히 낙엽층은 지표면을 보호하여 토양침식의 저감효과가 더욱 크다. 산불지역의 식생피복에 따른 토양침식 측정 자료에 따르면, 강우운동에너지는 식생피복이 증가함에 따라 지상피복(canopy cover)에 의한 감소보다는 지면피복(ground cover)과 낙엽피복(litter cover)에 의한 감소효과가 상대적으로 컸다. 식생피복에 의해 차단되는 강우의 손실량보다 침투량 증가에 의한 손실량이 상대적으로 많았다. 낙엽피복에 대한 강우모의 실험 결과에 따르면, 낙엽의 피복율이 증가함에 따라 지수적으로 토양침식량은 감소하였다. 낙엽 피복율의 40% 이상은 토양침식량을 현격이 감소시킨 반면, 피복율의 70% 이상은 지표유출량을 현저히 감소시켰다. 낙엽 피복율이 70%이상이면, 유출계수가 33%가 감소하였으나, 토양침식민감도는 94%로 크게 감소하였다.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.35-44
• /
• 2016

Various risk factors are known to be the nature of construction project execution process. These factors lead to potential claims, dispute mediation, arbitration, and litigation which can result in huge loss of money and time. Therefore, it is necessary for construction companies in Korea to improve overall project management capability through the evaluation before entering into the overseas construction market. Also, after examination of the claim and dispute caused by construction project risks, a substantial degree of influence and active preparation for the claim and dispute management should be confirmed via the effect analysis of the each factors. Main claim causes were derived through claim and dispute cases involved with domestic construction projects. As a prediction result of the main claim, 16.1% of the construction change claim, 5.7% of the bad faith claim and 2.7% for the construction delay claim were found to be the portion of the total construction cost. As a result of this analysis, risk management methodology was suggested to improve a project management capability for domestic construction companies through analysis result of the main factors of construction claims.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.701-712
• /
• 2012

The concept of $k$-shortest disjoint paths is considered important because the establishment of primary and backup forwarding paths exploiting shorter distance and faster propagation time is a dominant consideration for the design of a survivable backbone network. Therefore, we need to evaluate how well the concept of $k$-shortest disjoint paths is exploited for the design of a survivable ship backbone network considering the international standard related to ship backbone networks, the IEC61162-410 standard specifying how to manage redundant message transmissions among ship devices. Performance evaluations are conducted in terms of following objective goals: link capacity, hop and distance of primary and backup paths, even distribution of traffic flows, restoration time of backup forwarding paths, and physical network topology connectivity.

• Journal of the Korean earth science society
• /
• v.26 no.7
• /
• pp.706-713
• /
• 2005

Subsurface oceanic data (Z20; Depth of $20^{\circ}C$ isotherm and WWV; Warm Water Volume) from the tropical Pacific Ocean from 1980 to 2004 were utilized to examine upper ocean variations in relation to E1 Nino. Time series analysis using EOF, composite, and cross-correlation methods indicated that there are significant time delays between subsurface oceanic parameters and the Nino3.4 SST. It implied that Z20 and WWV would be more reliable predictors of El Nino events. Based on analyzed results, we also constructed neural network model to predict the Nino3.4 SST from 1996 to 2004. The forecasting skills for the model using WWV were statistically higher than that using the trade wind except for short range forecasting less than 3 months. This model greatly predicted SST than any other previous statistical model, especially at lead times of 5 to 8 months.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.735-742
• /
• 1996

Polymeric matrices were prepared with dextran and silver sulfadiazine by adding glycerine as a plasticiser. Namely, the release rate of the drug from the polymeric matrix formulations in dissolved phases was determined in a phosphate buffer solution. The results were as follows : The drug release time was delayed as drug loading contents increased, whereas it decreased as the glycerine concentration increased. The drug release time was not changed with varying the molecular weight of the dextran. The apparent release rate constant (k) increased as the composition of silver sulfadiazine and glycerine was increased. But the apparent release rate constant (k) was not changed with increasing molecular weight of the dextran.

• Journal of the Korean Chemical Society
• /
• v.40 no.9
• /
• pp.640-648
• /
• 1996

Crosslinked chitosan was prepared from chitin after reaction with epichlorohydrin followed by deacetylation at C2-position. Epidermal releasing polymeric matrix was prepared after swelling crosslinked chitosan with distilled water and adding silver sulfadiazine and glycerine as a plasticiser. The release behavior of silver sulfadiazine from polymeric matrix was studied in pH 7.4 phosphate buffer solution by varing the drug content, glycerine concentration, and the thickness of the matrix. The drug release time was delayed by increasing the content of silver sulfadiazine and the thickness of the matrix, whereas decreased as glycerine concentration increased. The apparent constant(K) of release rate was independent upon the matrix thickness, but was proportional to the content of drug or glycerine of crosslinked chitosan matrix. These results indicated that chitosan matrix showed some potential as a drug delivery system for transdermal therapeutic application.

• Journal of Wetlands Research
• /
• v.11 no.2
• /
• pp.47-54
• /
• 2009

This study was conducted to consider the characteristics of PM10(particulate matter with aerodynamic diameters less than 10 ${\mu}m$) concentration according to land-use in Busan coastal area. Fine particle is affected by emissions, geographical conditions and meteorological factors. In case industrial area, Gamjeondong(inland) PM10 concentration was higher than Noksandong(seashore) at all season except for Summer. Primary peak at Gamjeondong cleared than Noksandong in Fall and Winter. In case green area, Daejeodong(inland) PM10 concentration was higher than Dongsamdong(seashore) at all seasons. In case commercial area, primary peak occurrence time at Jeonpodong lagged one hour according to season and diurnal change of PM10 concentration at Gwangbokdong was higher than Jeonpodong in Spring. In case residential area, high PM10 concentration(80~90 ${\mu}g/m^3$) lasted for six hours during the daytime in Spring at Deogcheondong and Yongsuri(inland).

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.193-198
• /
• 2014

Lens and DVD require high quality of optical property. Conventional injection molded products contain high residual stress and this invokes birefringence since high cavity pressure and high temperature variation are involved in a molding process. Thus these products are often molded by injection compression molding in order to minimize the residual stress through reducing cavity pressure and uniform cavity pressure. In this study, molding parameters affecting molding quality such as property uniformity in injection compression molding were investigated through experiment. Molding quality deviations among the cavities in multi-cavity mold were also studied. Transparent resins, PC and PS were used in this study. Compression gap, compression speed, compression force, and compression delay time for processing variables in injection compression molding were applied in experiment. Compression force, compression delay time, and compression gap significantly affected the optical property of product. The degree of influence of process variable on the product quality was different in different resins. This implies that the optimal operational conditions in injection compression molding existed for each resin according to flow property.