• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.69-77
• /
• 2002

Sine digital signal processing for motion pictures requires huge amount of data computation to store, manipulate and transmit, more effective data compression is necessary. Therefore, the ITU-T recommended H.26x as data compression standards for digital motion pictures. The data compression method that eliminates time redundancies by motion estimation using relationship between picture frames has been widely used. Most video conding systems employ block matching algorithm for the motion estimation and compensation, and the algorithm is based on the minimun value of cast functions. Therefore, fast search algorithm rather than full search algorithm is more effective in real time low data rates encodings such as H.26x. In this paper, motion estimation employing the Nearest-Neighbors algorithm is designed to reduce search time using FPGA, coded in VHDL, and simulated and verified using Xilink Foundation.

• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.156-160
• /
• 2013

A study on compressive creep behavior of ACM rubber for automotive engine gasket was performed using TMA thermal analysis. From the results of isothermal measurements with constant load of 1 N at several different temperatures of 160, 180, 200, and $220^{\circ}C$, compressive creep data at the given temperatures were obtained, and therefrom, shift factor ($a_T$) and master curve at reference temperature of $160^{\circ}C$ were obtained using time-temperature superposition principle (TTSP). $C_1$ and $C_2$ of WLF (Williams-Landel-Ferry) equation were calculated through the WLF plot as -1.107 and 11.571, respectively. From this, life time of ACM rubber at $120^{\circ}C$ was predicted as about 24,000 hrs.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.1011-1018
• /
• 2005

The influence of liquid shotcrete accelerators(alkali aluminate, two types of alkali-free) was investigated. Comparing to the existing alkali aluminate accelerator, new alkali-free accelerator, AF2, shortened initial and final setting of cement system, and after curing for 1 day compressive strength was analogous with others. On the other hand, compressive strength of specimen cured for 12 hour was the highest by the addition of alkali aluminate accelerator, but final strength was the lowest by that. But compressive strengths of AF1, AF2 were similar to Plain up to 28day. Further from XRD(X-Ray Diffractometer) and DSC(Differential Scanning Calorimeter) analyses, we confirmed that setting promoted by alkali aluminate was mainly because of Ca(OH)2(calcium hydroxide), but the accelerating behavior of alkali-free was influenced by the needle-like ettringite$(6CaO{\cdot}Al_2O_3{\cdot}3SO_3{\cdot}32H_2O)$ crystal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.1055-1061
• /
• 2008

H.264 is the prominent video coding standard in various applications such as real-time streaming and digital multimedia broadcasting, since it provides enhanced compression performance, error resilience tools, and network adaptation. Compression efficiency of H.264 has been improved, however, it requires more computing and memory access than traditional methods. In this paper we proposed adaptive intra fast algorithm for real-time video surveillance system reducing the encoding complexity of H264/A VC. For this aim, temporal interrelationship between macroblock in the previous and the current frame is used to decide the encoding mode of macroblock fast. As a result, though video quality was deteriorated a little, less than 0.04dB, and bit rate was somewhat increased in suggested method, however, proposed method improved encoding time significantly and, in particular, encoding time of an image with little changes of neighboring background such as surveillance video was more shortened than traditional methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.321-326
• /
• 2021

This paper presents a technique to minimize damaged wafers during loading. A thin wafer used in solar cells and semiconductors can be damaged easily. This makes it difficult to separate the wafer due to surface tension between the loaded wafers. A technique for minimizing damaged wafers is to supply compressed air to the wafer and simultaneously apply a small horizontal movement mechanism. The main experimental factors used in this study were the supply speed of wafers, the nozzle pressure of the compressed air, and the suction time of a vacuum head. A higher supply speed of the wafer under the same nozzle pressure and lower nozzle pressure under the same supply speed resulted in a higher failure rate. Furthermore, the damage rate, according to the wafer supply speed, was unaffected by the suction time to grip a wafer. The optimal experiment conditions within the experimental range of this study are the wafer supply speed of 600 ea/hr, nozzle air pressure of 0.55 MPa, and suction time of 0.9 sec at the vacuum head. In addition, the technology improved by the repeatability performance tests can minimize the damaged wafer rate.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.2
• /
• pp.141-147
• /
• 2017

The purpose of this study is to develop an inorganic filling adhesive using MKP and borax based on Dead-burn magnesia and fly ash. First, basic experiments was conducted to derive the proper addition rate of MKP. And this experiment was carried out according to addition ratio of borax. The test items are measured for pot life, flexural strength, compressive strength, adhesive strength, tensile strength, ratio of temperature change, ratio of hardening shrinkage, radon gas and formaldehyde emission. As a result, the proper addition rate of phosphate was 35%. The pot time is about 10minutes, 15minutes and 25minutes according to addition rate of borax. The flexural strength and compressive strength were obtained at 12hours for minimum flexural strength of 8.0MPa and minimum compressive strength of 31.0MPa. The tensile strength was the least 4.1MPa, and the ratio of hardening shrinkage was maximum 2.4% and ratio of heat change was maximum - 0.3%, which satisfied all of the quality standards of 'KS F 4923' (epoxy resin for repairing concrete structures). Both Radon gas and formaldehyde emission was not detected.

• Journal of the Korea Concrete Institute
• /
• v.29 no.2
• /
• pp.141-148
• /
• 2017

This study is experimentally investigated the effects of various steam curing parameters on the early-age compressive strength development of high strength concrete (over 40 MPa) in the precast plant production. High strength concrete are used only ordinary portland cement (type I) and water-cement ratio selected 3cases (25%, 35% and 45%). Also, steam curing parameters are as followings ; (1) Preset period 2cases (3 hours and 6 hours) (2) Maximum curing temperature 3cases ($45^{\circ}C$, $55^{\circ}C$ and $65^{\circ}C$) (3) Maintenance time of curing temperature 3cases (4 hours, 6 hours and 8 hours) (4) Maximum rate of heating and cooling $15^{\circ}C$/hr. Initial setting time and adiabatic temperature rising ratio of these concrete according to water-cement ratio are tested before main tests and examined the compressive strength development for the steam curing parameters. Also compressive strength are compared with optimum steam curing condition and standard curing at test ages. As test results, the optimum steam curing conditions for high strength concrete(over 40 MPa) are as followings. (1) Preset period ; over initial setting time of concrete (2) Maximum curing temperature ; bellow $55^{\circ}C$ (3) Maintenance time of curing temperature ; bellow 6hours. Also strength development of steam curing concrete show in the reversed strength at 28 days. It is to propose an efficient steam curing condition for high strength concrete in the precast method.

• Geophysics and Geophysical Exploration
• /
• v.7 no.4
• /
• pp.225-233
• /
• 2004

The purpose of this study is to provide the geo-technical information by assessment of the in-situ rock strength using the reflected wave energy and travel time data acquired by the borehole acoustic scanner. In order to compare and analyze the relationship between the uniaxial compressive strength and the reflected wave energy, the laboratory test and the borehole acoustic scanning were conducted for the set of specimens, such as mortar, concrete, and rock samples which have different rock type. Finally, we verified the applicability of the reflected wave energy acquired by the borehole acoustic scanner to quantitatively estimate the in-situ rock strength.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.67-70
• /
• 2009

H.264/AVC 동영상 표준은 기존의 동영상 표준과 비교했을 때 뛰어난 압축률을 보인다. 특히 세밀한 움직임 예측을 통해 영상을 효율적으로 압축하지만 움직임 예측은 H.264/AVC 동영상 표준의 높은 복잡도의 원인 중 하나이다. 따라서 H.264/AVC의 부호화 시간을 단축하기 위해서는 고속 움직임 추정 기법이 필수적이다. 일반적으로 영상 신호는 인접한 화면과 매크로블록 사이에서 상관관계가 높고 부호화하고자 하는 매크로블록의 움직임벡터는 인접한 매크로블록에서 결정된 최적의 움직임 벡터와 유사한 방향성을 가진다. 그러므로 고정된 탐색 영역의 크기를 이용하면 불필요한 영역까지 움직임 예측 과정이 수행되어 계산량이 증가한다. 본 논문에서는 영상의 공간적, 시간적 상관도를 이용하여 탐색 영역의 크기를 결정하는 방법을 제안한다. 인접하는 블록들의 움직임 벡터의 표준편차를 이용하여 움직임이 작은 영역에서는 작은 탐색 영역을 이용하여 움직임 예측을 수행하고 반대로 움직임이 큰 영역에서는 큰 탐색 영역을 이용하여 움직임 예측을 수행한다. 또한 현재 화면과 참조 화면의 거리차가 클수록 참조 화면으로 선택되는 확률이 낮다는 사실을 이용하여 적응적으로 탐색 영역의 크기를 조절한다. 제안한 방법은 기존의 전 영역 탐색 방법과 유사한 부호화 성능을 보이면서 움직임 예측 시간이 평균 약 58.93% 감소하는 것을 확인할 수 있다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.113-116
• /
• 2013

최근 방송, 의료, 우주산업, 게임, UCC, 핸드폰 등 여러 사업 분야에 걸쳐 실제에 근접한 영상을 요구하고 있고 이것은 3D와 Ultra High Definition (UHD) 영상의 출현으로 현실화 되고 있다. UHD 급에 걸맞는 압축률을 위해 Joint Collaborative Team on Video Coding (JCT-VC) 에서는 MPEG-4 Part 10 AVC/H.264를 뒤이을 차세대 코덱으로 High Efficiency Video Coding (HEVC) 를 개발을 시작했다. HEVC는 기존 MPEG-4 Part 10 AVC/H.264코덱과 비교해 40%이상의 압축률을 나타내지만 복잡도 역시 상승했다. 특히 복호화기에서 복잡도는 중요한 요소이며, 역 코사인변환 (Inverse Discrete Cosine Transform, IDCT) 은 전체 복호화시간의 8% ~ 16%를 차지하는 알고리즘이다. 본 논문에서는 IDCT 의 수행시간을 줄이기 위해 병렬프로그래밍 중의 하나인 SIMD명령어를 사용하여 효율적으로 병렬화 프로그래밍을 하는 기법들을 제안한다. 본 제안 기법은 IDCT 수행시간을 평균 59% 단축하는 결과를 보였다.