• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.189-195
• /
• 2001

The characteristics of echolocation signals of the Common Dolphin, Delphinus Delphis was observed by the hydrophone in order to detect exactly distribution and migration on whales and dolphins in Korean Coastal waters. It's observation was carried out at the position of 13 mm off Gam-Po of Korean east-southern sea at 3rd-5th. April and 13th-15th. October, 1999. The results obtained are summarized as follows: (1) The frequency range of ship's noise and ambient noise in the observed station was 0.5-0.3 kHz, that ones could be influenced to the behavior of common dolphins which carry out echolocation using low-frequency. (2) The common dolphin was radiated single click of 8.6 ms and double click of 4.8 ms pulse width during these observation (3) The high click frequencies of common dolphin were 5.10 kHz, 7.22 kHz, 10.60 kHz with the click pulse width of 4.0 ms, 2.6 ms, 1.0 ms, respectively. In case of low-frequency 1-2 kHz, that is, 1.12 kHz, 1.38 kHz, 1.82 kHz, pulse width were 22.4 ms, 2.05 ms, 11.9 ms, respectively and they showed a tendency using triple click signal. (4) The pulse width, pulse recurrence interval and frequency range of the observed echolocation signals were 2.4-8.4 ms, 9.0-40.0 ms, 0.60-10.63 kHz respectively, and frequency spectrum level was 100-125 dB for single, double, triple click signals.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1011-1017
• /
• 1998

$YBa_2Cu_3O_{6+x}(Y123)-Ag$ high-Tc superconducting wires were fabricated by plastic extrusion technique using pyrophoric synthetic and mechanical mixing powder with and without Ag addition(20 wt.%). This method involves powder preparation, plastic paste making, die extrusion, binder burn-out and the sintering process. In order to fabricate a good-quality superconducting body, it is required to use homogeneous and fine-size power as a starting materials. $Y_2O_3-BaCO_3-CuO$ precursor powders with/without Ag addition were prepared both by pyrophoric synthetic(PS) and mechanical mixing(MM) method of raw powders. The formation kinetics of the powder mixtures into Y123 phase was investigated at various temperatures and times in air atmosphere. The powder prepared by PS method was more easily converted into a Y123 phase than the MM powder. The fine size and good chemical homogeneity of the powder prepared by PS method is attributable to the fast formation into a Y123 phase. The critical current density($J_c$) of the Y123-Ag superconducting wires made by plastic extrusion method were in the range of $150A/cm^2{\sim}230A/cm^2$. depending on the charateristics of starting material powders. $J_c$ of the wire prepared by pyrophoric synthetic powder with 20 wt.% Ag addition was $230A/cm^2$.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.1
• /
• pp.37-43
• /
• 2012

Radioactive waste transport package was developed to transport eight drums of low and intermediate level waste(LILW) in accordance with the IAEA and domestic related regulations. The package is classified with industrial package IP-2. IP-2 package is required to undergo a free drop test and a stacking test. After free drop and stacking tests, it should prevent the loss or dispersal of radioactive contents, and loss of shielding integrity which would result in more than 20 % increase in the radiation level at any external surface of the package. The objective of this study is to establish the safety test method and procedure for stacking test and to prove the structural integrities of the IP-2 package. Stacking test and analysis were performed with a compressive load equal to five times the weight of the package for a period of 24 hours using a full scale model. Strains and displacements were measured at the corner fitting of the package during the stacking test. The measured strains and displacements were compared with the analysis results, and there were good agreements. It is very difficult to measure the deflection at the container base, so the maximum deflection of the container base was calculated by the analysis method. The maximum displacement at the corner fitting and deflection at the container base were less than their allowable values. Dimensions of the test model, thickness of shielding material and bolt torque were measured before and after the stacking test. Throughout the stacking test, it was found that there were no loss or dispersal of radioactive contents and no loss of shielding integrity. Thus, the package was shown to comply with the requirements to maintain structural integrity under the stacking condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.146-152
• /
• 2018

In this study, to improve the performance of asphalt mixtures for plastic deformation occurring mainly in Korea, complex modifiers were prepared by mixing powders and liquid type modifiers. The main constituents were powdery diatomaceous earth, mica and carbon black, and liquid type solid 70% SBR latex. The tensile strength ratios for the two asphalt mixtures used in the test were above 0.80 for the Ministry of Land Transportation (2017) asphalt mixture production and construction guidelines. The effects of increasing the tensile strength in the dry state was more than 14% when the composite modifier was added. The deformation rate per minute by the wheel tracking test load was an average of 0.07 to 0.147 for each mixture. The strain rate per minute was improved by the modifier, and the dynamic stability was improved by almost 100% from 295 to 590. In addition, the final settling was reduced from 11.38 mm to 9.57 mm. A plastic deformation test using the triaxial compression test showed that the amount of deformation entering the plastic deformation failure zone at the end of the second stage section and in the third stage plastic deformation section was 1.76 mm for the conventional mixture and 1.50 mm for the complex modifier mixture. The average slope of the complex modifier asphalt mixture mixed with the multi-functional modifier was 0.005 mm/sec. The plastic deformation rate is relatively small in the section where the road pavement exhibits stable common performance, i.e. the traffic load.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.7
• /
• pp.625-635
• /
• 2008

Portable multimedia players have some different properties compared to general multimedia file server. Some of those properties are single user ownership, relatively low hardware performance, I/O burst by user special functions, and short software development cycles. Though suitable for processing multiple user requests at a time, the general multimedia file systems are not efficient for special user functions such as fast forwards/backwards. Soml' methods has been proposed to improve the performance and functionality, which the application programs give prediction hints to the file system. Unfortunately, they require the modification of all applications and recompilation. In this paper, we present a file system that efficiently supports user special functions in embedded multimedia systems using file block allocation, buffer-cache, and prefetch. A prefetch algorithm, SPRA (SPeed-based PRefetch Algorithm) predicts the next block using I/O patterns instead of hints from applications and it is resident in the file system, so doesn't affect application development process. From the experimental file system implementation and comparison with Linux readahead-based algorithms, the proposed system shows $4.29%{\sim}52.63%$ turnaround time and 1.01 to 3,09 times throughput in average.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.747-754
• /
• 2017

The Concrete-Filled Tube (CFT) system was developed for its excellent structural performance, such as its good stiffness, stress and ductility, which is derived from the mechanical advantages of its composite structure. However, it is known that the flat type of reinforcing plates need stiffeners placed at a certain distance from each other to avoid buckling failure, which increases the cost accordingly. This paper investigates the contribution of the rib elements placed inside the steel tube for the purpose of increasing the bond strength between the steel and concrete and fire performance with no additional protection. The test results also demonstrate the effectiveness of the corrugated rib's shape against fire. The results of this study showed that the buckling prevention and fire resistance performance criteria were satisfied by the application of the inner surface attachment rib, due to the resulting increase in the strength of the CFT column. Therefore, it is considered that the CFT method using the corrugated rib structure reinforcement developed through this study satisfies the structural and fire resistance performance criteria without the need for a refractory coating. Future studies will be needed to make the process efficient and economical for factory production.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5843-5848
• /
• 2011

To improve the efficiency of the channel spectrum and to reduce the power consumption of the system in EVRC, the voice signal is compressed and transmitted only when the user speaks to. In addition to this, voice frames are divided into three rates 1, 1/2 and 1/8 and each frame is handled differently. For example, we assumed that the input is silence region if the 1/8 rate is used. In this paper, the sections are firstly separated into the voiced speech signal region, unvoiced speech signal region, and silence region by using distribution characteristics of LSP parameters. Then the paper suggested to encode 1 rate for the voiced speech signal, 1/2 rate for the unvoiced speech signal region, 1/8 rate for the silence region. In other words, traditional way of transmission is used when sending full rate in the EVRC. However, when sending half rate, the voice is firstly distinguished between voiced and unvoiced. If the voice is distinguished as voiced, voice is converted into full rate before the transmission. If it is distinguished as silence, EVRC's basic rate is applied. In the experimental results with SNR, ASDM, transmission bit rate measurement, we have demonstrated that voice quality was improved by using the proposed algorithm.

• Journal of Korea Multimedia Society
• /
• v.15 no.6
• /
• pp.805-813
• /
• 2012

In this paper, we have designed and developed a middleware for an effectively approaching database to the existed brain disease clinical research system. The brain disease clinical research system was consisted of two parts i.e., a register and an analyzer. Since the register collects the registration data the analyzer yields a statistical data which based on the diverse variables. The middleware has designed to database management and a large data query processing of clients. By separating the function of each feature as a module, the module which was weakened connectivity between functionalities has been implemented the re-use module. And image data module used a new compression method from image to text for an effective management and storage in database. We tested the middleware system using 700 actual clinical medical data. As a result, the total data transmission time was improved maximum 115 times faster than the existing one. Through the improved module structures, it is possible to provide a robust and reliable system operation and enhanced security functionality. In the future, these middleware importances should be increased to the large medical database constructions.

• Information and Communications Magazine
• /
• v.11 no.10
• /
• pp.120-138
• /
• 1994

최근에 정보 고속도로 사업계획과 관련하여 세계 여러나라들이 실시하거나 실시 예정인 VOD 시험서비스에 많은 관심이 일고 있다. VOD서비스와 같은 대화형 TV 서비스(I-TV, Interactive-TV Service)는 컴퓨터, 통신 가전업체 그리고 영화 제작사등이 함께 참여하고 있다. 본 기고에서는 차세대 통합 멀티미디어 사업이라는 대화형 TV서비스의 개요와 요소기술, 그리고 서비스의 동향 및 전망을 알아보기로 한다. 1. 대화형 TV 서비스(Interactive TV Service)의 개요 현재까지 대부분의 TV 시청자들은 방송국으로부터 송신되는 공중파나 CATV서비스를 통해 프로그램 서비스를 받아보는 방송(broadcasting)방식 형태의 서비스를 이용해 왔다. 그러나 이러한 일방적인 수신방식은 최근 미국의 클린턴 행정부가 미국의 차세대 기반 통신망 구축 정책(정보 고속도로 사업; Information Super High-way)의 일환으로, CATV 사업자뿐만 아니라 지역 전화회사까지도 참여하고 있는 VOD(Video On Demand) 시험서비스가 시행됨에 따라서 미국은 물론, 우리나라를 비롯한 여러나라에서 대화형식의 TV서비스를 시행하려는 움직임이 일어나고 있다. 이러한 움직임은 지난 ‘92년 7월 16일 미 연방통신위원회(FCC. Federal Communication Committee)가 그동안 전화회사에 대해 CATV 시업진출을 금지하였던 정책을 바꿔서, CATV에 대항한 경쟁도입과 기반 정보통신망 정비를 목표로 하여 비디오 다이얼톤(VDT(주), Video Dial Tone)이라는 이름하에 공중통신 사업자에게도 영상신호를 전송을 인가함에 따라 시작되었다. VOD서비스와 같은 대화형 TV서비스는 가입자가 원하는 서비스를 시간에 관계없이 댁내의 통신회선(일반전화망, 케이블망, 광화이버망, 위성망)을 통해서 요구 즉시 실시간에 서비스를 받아볼 수 있는 멀키미디어의 통합서비스 방식이다. 도한 이 서비스는 음성통신과 방송의 통합형 서비스로서, 방송국, 전화회사 혹은 서비스 제공업자(ISP ; Information Service Provider)에 의해 제공된 디지탈 영상 및 일반 데이터 등을 압축하여 서버에 저장한 후, 소비자의 요청이 있을 경우에 통신회선을 통해 즉시 서비스 해준다. 이와 같은 대화형 TV 서비스의 구성요소로는 다양한 영상정보 및 데이타를 보유하고 있는 정보제공자, 전화선이나 CATV 또는 위성방송과 연결해 주는 지역별 비디오 서버 및 교환장치, 통신회선을 통해 전송된 서비스를 영상정보로 만들어주고 또한 가입자의 요구를 즉시 정보제공자에게 알려줄 수 있는 가정용 단말기 (STB. Set Top Box)로 이루어진다. 여기서, 비디오 서버는 다양한 대화형 TV 서비스를 제공해 주는 중계자로서, 영화, 홈쇼핑, 홈뱅킹, 대화형 교육, 비디오 게임 등을 가정에서도 가능하게 해 줄 뿐 아니라, 가입자를 관리하는 기능을 가지고 있어서 가입자 정보는 물론, 각종 서비스 사용료, 개인 통계자료 분석 등도 집계할 수 있는 기능을 가지고 있다.(그림1) 본 기고에서는 이러한 대화형 TV서비스 중에 대표적 응용서비스인 VOD 서비스에 사용되는 기술요소와 각국에서 진행되고 있는 VOD 서비스 동향 및 전망에 대해 알아보고자 한다. (주) VDT(Video Dial Tone) : FCC가 ‘92년 7월 16일에 인가한 지역 전화회사에 의한 가정용 영상 전송서비스 및 CATV에 대항한 경쟁도입과 Infrastructure의 정비를 목표로 하여 결정한 내용은 다음과 같다. 지역 전화회사에 대하여 (1) 공중통신사업자에 대하여 서비스 제공자에 대한 영상신호의 전송을 인가(기본서비스), (2) Video Gateway 서비스, 비디오 기기 제공, 서비스 제공사업자에 대한 과금, 요금징수 대행을 인가(고도서비스), (3) 프로그램 제공자에 대하여 자본출자율을 5%로 높이는 외에 (종래는 1%) 업무 관계의 확대(합병회사 설립 및 consultant 계약 등)를 인가. (4) Rural 지역(영업지역의회의 지방)에 대한 직접 프로그램 제공의 특별인가(주민이 1만세데 미만의 지방 공공 단체만 가능, 영업지역내에서는 제한없음), (5) 지방공공 사업체에 의한 영업면허의 불요(지역 전화회사가 직접 사용자에 서비스를 제공하지 않기 때문에 CATV 서비스로는 보지 않기 때문). (6)의 회로의 권고(케이블 정책법으로 결정되어 있는 통신사업자와 CATV회사 자본의 상호보유 금지의 해제) 등이다.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.139-148
• /
• 2011

Asphalt concrete overlay method is used by general maintenance and rehabilitation of construction for aged concrete pavement in Korea. However, in case of the AC overlay method to extend service life of the existing concrete pavements, various distresses of reflection crack, pothole and rutting are the typical problems of the asphalt overlay on existing concrete pavement since it has different physical characteristics between asphalt overlay and existing concrete pavement. To achieve this, application of concrete overlay method is required instead of AC overlay method. Concrete overlay method has advantages that can reduce maintenance cycle and costs since it has excellent bearing value for heavy vehicles and no rutting. However, technical problems of detour road construction, traffic control and other disadvantages happened by long curing time. Thus, in this study and experimental research were launched to evaluate the workability, durability and resistance against environmental loading of Very Rapid Hardening Acrylic Polymer Modified Concrete(VRH-APMC) for application of bonded concrete overlay method. Test results showed that the compressive and bond strength were exceed 21MPa and 1.4MPa of target strength after four hours for rapid traffic opening properties. And tests of resistance against environmental loading results showed that VRH-APMC secured excellent durability. Thus, it was known that VRH-APMC was suitable material for large scale bonded concrete overlay method, and it was possible to use maintenance and rehabilitation method which needs enough workability and rapid traffic opening.