• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.121-127
• /
• 2007

Direct acting pressure relief valve applicable to propellant tank of launch vehicle is modeled in this study The flow resistance of the partially opened valve is modeled as a function of the distance of the valve stem from the resting position. The position of the valve varies transiently as a function of its mass, the spring force, sliding friction, and the pressure differential. Choking at valve throat and compressibility are considered for the analysis. This study presents systematic analysis method for pressure relief valve applicable to propellant tank of liquid rocket. The results shows transient flow resistance caused by stem motion and the importance of choking at valve throat for pressure relief valve design.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.204-210
• /
• 2013

Effects of additives (lubricant and antioxidant) and melt-blending condition (temperature, time and rotor speed) on the mechanical properties of polypropylene-based wood polymer composites (WPCs) were investigated. WPCs were prepared by melt-blending followed by compression molding. To understand melt-blending procedure, torque change of the WPC melt-blend was monitored. Maleic anhydride modified PP and nanoclay were used as a compatibilizer and a reinforcing filler, respectively. UTM and izod impact tester were used to measure the mechanical properties of the WPCs and a color-difference meter was used to measure the discoloration of the WPCs according to melt-blending condition. The mechanical properties showed that the optimized melt-blending condition was $170^{\circ}C$, 15 min, and 60 rpm. The mechanical properties of the WPCs decreased with increasing lubricant and antioxidant content. The two step method, adding wood flour later separately during melt-blending, was more effective than the typical one step method for improving the mechanical properties of the WPCs.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.233-239
• /
• 2014

Ultra high-resolution content, the file size is very large, therefore existing encoding techniques, it is not possible to transmit via the network. Efficient use of the network encoder HEVC corporation can be transferred. Compression requires a lot of time because it requires a distributed transcoding system. Distributed transcoding system is a distributed data store, and then encoded using a large number of nodes. The disadvantage of distributed transcoding system for distributed information is exposed or vulnerable to attack by internal managers. In this paper, when the super high definition content transcoding, distributed transcoding system does not guarantee the confidentiality of the problem to solve. We are using SNA, HEVC encoded content data encrypted using the secret distributing scheme was. Consequently, secure shared transcoding is possible, the internal administrator could prevent the attack.

• Elastomers and Composites
• /
• v.46 no.3
• /
• pp.186-194
• /
• 2011

Natural fiber/natural rubber composites were fabricated by uniformly compounding natural rubber and cellulose- based natural fiber kenaf and then by compression molding. The effect of kenaf fiber content on their vulcanization behavior, hardness, tensile properties, tear strength and static and dynamic properties was investigated. The contents of kenaf fiber in the composites were 0, 5, 10, 15, and 20 phr, compared to natural rubber and additives. The result indicated that various properties of natural rubber depended on the kenaf fiber content. With increasing kenaf fiber content, the torque for vulcanization of natural rubber was increased whereas the vulcanization time was reduced as well. The hardness, tensile modulus and tear strength of kenaf/natural rubber composites were gradually decreased with the fiber content whereas the tensile strength and elongation at break were decreased. Also, with increasing the kenaf fiber content the dynamic property of natural rubber was changed more greatly than the static property. The loss factor, which is closely related with the damping or absorption of the energy given to natural rubber, was proportionally increased with the fiber content.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.68-75
• /
• 2015

We conducted a thermal compression of domestic Korean pinewood for a use in flooring. For the evaluation of flooring material, we measured dimensional stability and surface hardness of thermally compressed wood. It is possible to make high-specific gravity woods with a range of 0.82-0.92 after the thermal compression with 50% compression set. The surface hardness increased with an increase in the pressing temperature. The highest value of surface hardness was $23.6N/mm^2$, which was obtained from the thermal compressed wood with pressing temperature of $160^{\circ}C$ and 30 minutes of pressing time. However, the surface hardness of woods treated at high temperature of $180^{\circ}C$ or greater decreased. The recovery of thickness decreased with increasing the pressing temperature. For dimensional stability, compression temperature was more dominant than compression time.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.10-17
• /
• 2008

The purpose of this thesis is to reduce of error for source location through acoustic emission(AE) signal, generated elastic wave from crack growth to leak for facility diagnosis. Especially, in order to overcome noise from original signal, this paper proposed enhancement of source location by using noise reduction based on wavelet transform. To evaluate actual performance in experiments, Pencil Lead Break is used crack signal source on the aluminum plate and drain valve of air compressor is used as substitute pressure vessel to generate leak signal. In signal processing, wavelet shrinkage and soft threshold are used to discriminate signal source and then source location techniques have been effectively used with group velocity using material property and time difference between sensor using cross correlation. Source location for crack and leak test have some difference, but the result show that improved 30% with a average length within 10.46mm in crack test and improved 2% compare with average filter in leak test when we applied wavelet transform.

• Composites Research
• /
• v.16 no.6
• /
• pp.16-22
• /
• 2003

This paper studied the AE(acoustic emission) characteristics of the laminated composite structures. The composite stiffened panels under the compressive loading emitted various AE signals when they buckled or changed the buckling modes. In addition, the failure initiated and propagation generated a lot of complex signals. From the continuous signal generation. we identified when the failures initiated and whether they propagated or not. The single lap joint of laminated plates under tensional load also generated AE signals when bonding region failed. The first failure occurrence and its propagation are monitored by generated AE signals. The characteristics of AE signals used in this analysis are cumulative hits, hit distribution, peak frequency of generated AE waveform and amplitude of signals. The analysis of AE signals shows that continuous increment of cumulative hits can be regarded as damage propagation and three dominant peak frequencies can correspond to typical failure modes in the laminated composites.

• Geophysics and Geophysical Exploration
• /
• v.4 no.2
• /
• pp.34-44
• /
• 2001

Forward modeling by construction of synthetic data is usually practiced in a horizontal surface and a few subsurface structures. However, in-situ surveys often take place in such topographic changes that the corrupted field data always make it difficult to interpret the right signals. To examine the propagation characteristic of elastic waves on the irregular surface, a general mesh generation code for finite element method was modified to consider the topography. By implementing this algorithm, the time domain modeling was practiced in some models with surface topography such as mound, channel, etc. The synthetic data obtained by receivers placed on surface also agreed with the analytic solution. The snapshots showing the total wave-field revealed the propagation characteristic of the elastic waves through complex subsurface structures and helped to identify the signals on the time traces. The transmission of Rayleigh waves along the surface, compressive waves, and sheer waves was observed. Moreover, it turned out that the Rayleigh waves behave like a new source at the edge.

• Elastomers and Composites
• /
• v.47 no.3
• /
• pp.254-258
• /
• 2012

Material characteristics and the prediction of life time of polyacrylic rubber (ACM) for automotive engine gasket were studied. Two kinds of ACM rubber compounds, having chlorine cure-site and carboxyl cure-site, were made with optimum formulations and the properties of each materials were examined. As a test results for the thermal properties and compression set, which are very important in the application for the automotive engine gasket, the compound using ACM with carboxyl cure-site was evaluated as having a better characteristics than that of ACM with chlorine cure-site. Arrhenius relationship based on time-temperature superposition principle (TTSP) was obtained through the accelerated heat aging test to predict the useful life-time for the compound using ACM with carboxyl cure-site.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.1
• /
• pp.27-32
• /
• 2014

This study analyzed the fundamental characteristics of concrete according to a ternary system mixing in order to reduce hydration heat of mass concrete and to improve early age strength. The results are as follows. The fluidity of unconsolidated concrete satisfied the target scope regardless of the binder conditions. When the replacement ratio between FA and BS increased, the slump of low heat-A mix and low heat-B mix increased, and air content was not affected by the change of binders. As for setting time, low heat cement mix had the fastest regardless of W/B, and high early strength low heat mix achieved 6 hours' reduction compared with low heat-B mix at initial set, and 12 hours' reduction at the final set respectively. As for the simple hydration heat, the low mix peak temperature was the highest and low heat-B mix had the lowest temperature. And high early strength low heat mix was similar with that of low heat-B. The compressive strength of hardened concrete had similar strength scope in all mixes except for low heat-B mix at early ages, and had unexceptionally similar one without huge differences at long-term ages.