• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.632-636
• /
• 1993

Gel strength of fish protein at various processing conditions such as heating temperature, heating time and salt content was determined by using compressive stress and residual delay time of ultrasonic wave. The compressive stress, interpreted as indicating the relative gel strength, was increased with increasing the heating temperature and heating time, and with decreasing the salt content, while the delay time of ultrasonic wave reduced, indicating that the gel strength and the delay time are inverse proportion. The result of the multiple regression analysis with factorial design showed that the model equation consisted with delay time and processing condition variables gave the good prediction of the gel compressive stress which was coincided with compressive stress measured.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.2
• /
• pp.179-188
• /
• 2012

Packing techniques, one of malicious code detection and analysis avoidance techniques, change code to reduce size and make analysts confused. Therefore, malwares have more time to spread out and it takes longer time to analyze them. Thus, these kind of unpacking techniques have been studied to deal with packed malicious code lately. Packed programs are unpacked during execution. When it is unpacked, the data inside of the packed program are changed. Because of these changes, the entropy value of packed program is changed. After unpacking, there will be no data changes; thus, the entropy value is not changed anymore. Therefore, packed programs could be unpacked finding the unpacking point using this characteristic regardless of packing algorithms. This paper suggests the generic unpacking mechanism using the method estimating the unpacking point through the variation of entropy values.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.3
• /
• pp.33-41
• /
• 1995

본 연구는 터보 과급기 부착 디젤 기관의 급가속 운전시 기관과 과급기의 과도 응답 성능을 규명하고 이를 개선하기 위한 실험을 수행하였다. 과도 응답 성능 구명은 일정한 회전 속도로 정상 운전중인 기관의 연료 펌프 랙을 10%에서 40%까지 일정 시간동안 급가속하였을 경우에 대하여 수행하였으며, 이때의 과급기 응답 지연 현상을 개선하기 위한 실험은 급가속과 동시에 압축기 출구의 흡기메니폴드 내에 일정한 압력의 공기를 추가 분사하는 방법을 이용하였다. 그리고 공기 분사 압력, 공기분사 기간, 가속률, 가속 시간 등이 압축기 출구의 압력과 온도, 터빈 입구의 압력과 온도, 실린더 압력, 기관과 과급기 회전 속도 등의 응답 성능에 미치는 영향을 가속전 정상 상태의 기관 회전 속도와 적용부하의 변화에 따라 시간의 함수로 나타내었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06d
• /
• pp.463-467
• /
• 2007

H.264는 MPEG-2, H.263, MPEG-4 part 2와 같은 이전 표준에 비해 높은 압축 효율을 가진다. 하지만 높은 압축 효율로 인한 계산 복잡도 증가라는 단점을 가진다. 본 논문은 이 점을 고려하여 시간적 공간적 상관성을 고려한 빠른 모드의 선택 기법을 제안한다. 시간적 상관성을 고려하여 모드 선택의 속도를 증가시키고, 공간적 상관성을 이용하여 시간적 상관성을 고려한 모드 선택의 정확성을 증가시킨다. 실험 결과 참조 소프트웨어인 JM 10.2와 비교했을 때, 적은 PSNR과 비트율의 손실로 전체 부호화 시간이 약 70% 정도 감소되었다.

• Journal of Korean Port Research
• /
• v.10 no.1
• /
• pp.37-51
• /
• 1996

2차의 섭동법과 경계요소법에 기초한 시간영역해석법은 불규칙파의 파동장에 있어서 파-구조물의 비선형간섭을 해석할 수 있는 해석법이지만. 파와 구조물의 운동이 정상상태에 도달하기까지 시간스텝으로 계산을 수행하여야 하므로 계산시간이 매우 길어지고, 각 성분파와 그에 의한 운동요소를 평가하는 것이 어렵다. 반면에 주파수영역해석법은 계산시간이 짧고, 각 성분요소들의 변화특성을 쉽게 판단할 수 있지만, 불규칙파동장으로의 적용이 현실적으로 어렵다는 단점을 가진다. 본 연구에서는 잠제 등에 대해서 전개되어 있는 주파수영역해석법을 임의형상의 부체 구조물에 대해 새롭게 수식의 전개를 수행하고, 압축공기주입 부체구조물에 적용하여 실험 및 이론해석결과로부터 그의 타당성을 확인한다. 이 때 압축공기의 거동은 Boyle법칙을 사용하여 평가한다.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.2
• /
• pp.162-170
• /
• 2011

As the result of implementing a treated material test and durability test after quickly drying S.P.F. species, a type of softwood structural material, within a short period time, soaking it in liquid phosphate flame proof agent for an hour, microwave heating it, and compressing it from 3.8cm to 1cm, when setting the appropriate heating time of microwave heating at 7 minutes at 5kW, it is observed that it satisfies the target water content (4~5%). It is shown that in a water content measurement of the wood that is compressed after being softened by soaking in the flame proof agent, drying and heating at 3kW for 9 minutes, all specimens satisfied 12~14%, the appropriate water content for exterior wood. Also, it is shown that in terms of the flame performance obtained through a flame resistance treatment of the compressed wood and a treated material test, the specimen soaked in flame proof agent for 30 minutes was the most excellent, and that the performance test result of the compressed wood in all areas, such as nail withdrawal resistance, compression, bending strength, and shearing strength, were all improved in their mechanical features to twice to three times better performances.

• Journal of Broadcast Engineering
• /
• v.19 no.2
• /
• pp.257-267
• /
• 2014

Distributed compressive video sensing (DCVS) is a low cost sampling paradigm for video coding based on the compressive sensing and the distributed video coding. In this paper, we propose using a skip-mode coding in DCVS under the assumption that in case of high temporal correlation, temporal interpolation can guarantee sufficiently good quality of nonkey frame, therefore no need to transmit measurement data in such a nonkey frame. Furthermore, we extend it to use a hierarchical structure for better temporal interpolation. Simulation results show that the proposed skip-mode coding can save the average subrate of whole video sequence while the PSNR is reduced only slightly. In addition, by using the proposed scheme, the computational complexity is also highly decreased at decoder on average by 43.75% for video sequences that have strong temporal correlation.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.6
• /
• pp.527-532
• /
• 2018

The objective of the present study is to evaluate a practical approach for enhancing the compressive strength and minimizing deforming of aerated concrete. Test results measured in the aerated concrete mixes that were produced using 40% ground granulated blast-furnace slag (GGBS) as a replacement of cement and cured under different conditions (i.e., high temperatures of $40^{\circ}C$ and $60^{\circ}C$ for 10 hrs or 15 hrs) were compared with those obtained from the specimens cured under room temperature. No deforming was observed in the mixes with 40% GGBS. The compressive strength of the prepared aerated concrete cured under high temperature was higher than that of the concrete cured at room temperature, even at the lower ranges of the apparent dry density. However, the curing time is needed to be controlled as not exceeding 10 hrs at the temperature of $60^{\circ}C$ to prevent the decrease in the compressive strength due to foam mergences.

• Broadcasting and Media Magazine
• /
• v.7 no.3
• /
• pp.75-82
• /
• 2002

In this report, the complexity analysis of the JVT(Joint Video Team) codec, which has jointly developed the next video coding standard, is performed. Three types of configurations in terms of coding efficiency are set and the analysis of the memory band width and computation time for each configuration is performed. ATOMIUM complexity analysis tool is used for both the memory access statistics and computation time calculation of JVT codec. Also the complexity of each video coding tool in the encoder and decoder is shown in relative complexity.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.14-15
• /
• 2013

본 논문에서는 공간 계층 분해를 이용한 3 차원 메쉬 시퀀스 압축 기법을 제안한다. 제안하는 기법은 우선 각 점에 대한 시간적 궤적을 공분산 행렬로 표현하고, PCA(Principal component analysis)를 적용하여 시간 궤적에 대한 고유 벡터와 PCA 계수를 획득한다. 공간적인 예측을 통해 PCA 계수에 대한 벡터 차를 추출하고, 벡터 차와 그것에 대한 고유 벡터를 전송한다. 제안하는 방법은 PCA 계수 예측의 성능을 높이기 위해 점진적 압축에서 사용하는 공간 계층 분해 기법을 적용하여, 계수 예측에 효과적인 이웃 점을 지정하도록 한다. 또한, 이웃 점 개수를 사용자가 임의로 지정할 수 있도록 하여, 성능과 복잡도간의 트레이드 오프를 제어할 수 있도록 한다. 다양한 모델에 대한 실험 결과를 통해 제안하는 방법의 성능을 확인한다.