• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.1
• /
• pp.115-122
• /
• 2006

Repairing concrete structures depended on only technician' experience without quality test standards would have problems. For solving those problems, this paper has analyzed the relations between injection quantify and crack width, injection time and crack width, injection pressure and crack width, injection pressure/time and crack width, injection quantity and structure size, injection quantify and individual crack Position, injection time and crack width/structure thickness. The data gained from this analysis would be helpful for systematic quality control of repairing concrete structures.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.6
• /
• pp.191-197
• /
• 2006

This study is to establish a standardization of injection system by inorganic material for crack repair of tunnel concrete structures. For this various surveys and experiments were carried out as followed. The first we surveyed capability of injection and crack pattern of concrete structures in site. and second we analyzed the relationship between crack width and volume of injection, and decided pressure and volume of injection. Finally we evaluated the relationship between crack width and volume of injection with kind of concrete structures, and between required time for injection and crack width with thickness of structure. From these surveys and experiments, we cleared the relationship between crack patterns and injection technologies such as volume, pressure of injection and required time for injection with kind of structure.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.2
• /
• pp.1-11
• /
• 1997

During hydroproof test of composite pressure vessel, acoustic emission signal was measured and analyzed to evaluate structural integrity of composite motor case. When pressure was held for 1 min. at constant pressure from low pressure level to high pressure level, the pattern of hit rate of good composite pressure vessel is increased with higher value than that of bad composite pressure vessel. This report also presents detection possibility of burst location approximately in the range of 25∼36％ of burst pressure using energy rate. In case that it is difficult to detect burst location of composite motor case, it is possible to detect burst location, i.e. structurally weak location of composite pressure vessel with applying same pressure lower than maximum expected operating pressure(MEOP) repeatedly.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.28-31
• /
• 1992

초고진공 시스템을 구성할 때 고려할 요소는 진공용기의 세척과 표면조도, 진공용 기의 재질, 기타 방출기체의 요인이다. 초고진공용기를 전해연마 처리하였으며, 처리한 진공 용기의 표면조도를 표면 조도기(surface profiler)로 측정하였다. 진공용기는 직경 300mm이 고 높이는 720mm로 하였다. 설치한 초냉각 펌프로 18시간 배기후 2.9 $\times$ 10-10Torr를 얻었 으며, 계속해서 초고진공용기를 250에서 60시간 baking 후 최저도달 압력이 3.08 $\times$ 10-11torr에 도달하였다 누드 이온게이지를 이용하여 초고진공용기의 최저도달압력과 누출비 를 측정하였다.

• Journal of the Korea Convergence Society
• /
• v.10 no.3
• /
• pp.67-72
• /
• 2019

The purpose of this study was to analyze the effects of computer game usage time on trunk muscle thickness and pressure pain threshold. The 33 study participants were divided into Group A, which spent less than 10 hours per week playing computer games; Group B, which spent between 10 and 20 hours per week playing computer games; and Group C, which spent more than 20 hours per a week playing computer games. The thickness of the participants' upper trapezius (UT), pectoralis minor (PM), anterior scalene (AS), and middle scalene (MS) muscles as well as the pressure pain threshold of their UT, PM, AS, MS, and levator scapular (LS) were measured. The study found that the PM, AS, and MS muscle thickness in group C was significantly greater than in the other groups (p<.05), and the UT, AS, PM, and LS pressure pain threshold in group C was significantly lower than in other groups (p<.05). Therefore, those who use computers for a long period of time during the week should recognize that their computer usage may cause musculoskeletal disorders.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.5
• /
• pp.235-241
• /
• 2018

The internal pressure is a critical parameter for designing a pressure vessel. The static pressure that a pressure vessel must withstand is usually determined according to the various codes and standards with simple formula or numerical simulations considering the geometric parameters such as diameter and thickness of a vessel. However, there is no specific codes or technical standards we can use practically for designing of pressure vessels which have to endure the detonation pressure. Detonation pressure is a kind of dynamic pressure which causes an impulsive pressure on the vessel wall in a extremely short time duration. In addition, it is known that the magnitude of reflected pressure at the vessel wall due to the explosion can be over twice the incident pressure. Therefore, if we only consider the reflected pressure, the design of the pressure vessel can be too conservative from the economical point of view. In this study, we suggest a practical method to evaluate the magnitude of maximum allowable pressure that the pressure vessel can withstand against the detonation inside a vessel. As an example to validate the proposed method, we consider the pressure vessel containing hydrogen gas.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.334-341
• /
• 2003

When the pressure tubes(f are in contact with the calandria tube(CT) in the pressurized heavy water reactor(PHWR), the temperature difference between inner and outer wall of W results in a thermal diffusion of hydrogen (deuterium) and hydride blisters are formed on the outer surface of PT. Because the hydride blisters and zirconium matrix are acoustically continuous, it is not easy to distinguish the blisters from the matrix with conventional ultrasonic method. An ultrasonic velocity ratio method was developed to detect small hydride blisters on the zirconium pressure tube. Hydride blisters were grown in the PT specimen using a steady state thermal diffusion device. The flight times of longitudinal echo and reflected shear echo from the outer surface were measured accurately. The velocity ratio of the longitudinal wave to the shear wave was calculated and displayed using contour plot. Compared to the conventional flight time method of longitudinal wave, the velocity ratio method shows superior sensitivity to detect smaller blisters as well as better images for the blister shapes. Detectable limit of the outer shape of the hydride blisters was conservatively estimated as $500{\mu}m$, with the same specifications of ultrasonic transducer used in the actual PHWR pressure tube inspection.

• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.71-73
• /
• 2016

기존 우산의 단점을 보완한 발명품, 공기우산이 개발되었다. 하지만 공기우산의 단점인 짧은 사용시간을 보완하기 위해 강우량에 따라 적절하게 공기 분사압을 변화시키는 것뿐만 아니라 공기우산의 사용인원의 조절을 위해 압력비와 분사구 형태에 따른 우산의 효과를 알아보는 것이 실 사용에 중요한 요소일 것이다. 이에따라 본 연구에서는 우산 앞 부분의 분출구 형상과 자유류와의 분사 압력비에 따른 자유류의 방어 능력을 확인해 보았다. 평면 분사구에서 압력비가 1.3, 1.5인 구간에서는 우산의 효과를 나타낼 수 없었고 압력비가 1.5인 구간부터 삼각형 분사구와 육각형 분사구에서 우산의 형태가 나타남을 알 수 있었다. 압력비가 2.0인 구간에서 육각형 분사구의 경우 통상적인 우산의 형상을 보이기 시작하는 것을 알 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.346-353
• /
• 2012

The Laser-Induced Breakdown Spectroscopy (LIBS) has great advantages as an analytical technique, namely real-time analysis without sample preparation, ideal for mobile chemical sensor for space exploration. The LIBS plasma characteristics are strongly dependent on the surrounding pressure. In this study, seven types of target (C, Ti, Ni, Cu, Sn, Al, Zn) were investigated for their elemental lifetime. The target was located in vacuum chamber which has the pressure range of 760 to $10^{-5}$ torr. As the pressure is decreased, the elemental lifetimes of carbon and titanium declined, while all other targets showed increased lifetimes until reaching 1 torr and declined with continued pressure decrease. The boiling point and electronegativity amongst the physicochemical properties of the samples are used to explain this peculiarity.

• Journal of Digital Contents Society
• /
• v.18 no.4
• /
• pp.699-706
• /
• 2017

This study aims to investigate the effects of a massage device with vibration and pressure functions and a manual massage on the degree and duration of pain among patients after intramuscular injection. This study used a quasi-experimental design with nonequivalent control group. The experimental group had lower pain scores (t= 7.40, p =.001) and shorter durations of pain (t= 5.25, p=.001) than the control group. The results showed that after intramuscular injection, a massage device with vibration and pressure functions effective to reduce the degree and duration of pain than a manual massage. Therefore, the application of a massage device with vibration and pressure functions after intramuscular injection will contribute to the promotion of patient safety and the reduction of nurse workload.