• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.16-22
• /
• 2013

A general characterization procedure based on the extraction of a 2n-port admittance matrix corresponding to n uniform coupled lines on the multi-layered substrate using the Finite-Difference Time-Domain (FDTD) technique is presented. In this paper, the frequency-dependent normal mode parameters are obtained from the 2n-port admittance matrix to analyze multi-layered asymmetric coupled line structure, which in turn provides the frequency-dependent propagation constant, effective dielectric constant, and line-mode characteristic impedances. To illustrate the technique, several practical coupled line structures on multi-layered substrate have been simulated. Especially, embedded conductor structures have been simulated. Comparisons with Spectral Domain Method are given, and their results agree well. It is shown that the FDTD based time domain characterization procedure is an excellent broadband simulation tool for the design of multiconductor coupled lines on multilayered PCBs as well as thick or thin hybrid structures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2451-2458
• /
• 2010

We prepared sustained release matrix system which contains carvedilol with Compritol 888 ATO used as lipophilic sustained release excipient and hydroxypropyl methyl cellulose (HPMC) or polyethylene oxide (PEO) used as hydrophilic sustained release polymer. Wet granulation compressed method was used for preparing carvedilol sustained release matrix tablets. When carvedilol sustained release matrix tablets were prepared, we evaluated the drug release kinetics which is affected by Compritol 888 ATO ratio, a kind of hydrophilic polymer (HPMC, PEO) and hot melt coating coagglutination (HMCC) process was done. The drug release kinetics was measured for 24 hours in pH 1.2 simulated gastric fluid and pH 6.8 simulated intestinal fluid, using a dissolution tester at $37.5^{\circ}C$ in 50 rpm. Dissolution rate of controlled release matrix tablets of carvedilol was evaluated by paddle method. We confirmed that HMCC process was very effective to controlled release of drugs. The rate of Compritol 888 ATO, as a lipidic material, can control the drug release pattern about the elution rate of 95% and 24 hours delay than that of the normal tablet.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.120-122
• /
• 2004

평판 스위치 전극에 인가되는 전압 변화에 따라서 전극 앞에서의 플라즈마 전위의 변화를 측정하고, 이를 이용하여 형성된 전계의 변화를 관찰하였다. 대부분 스위치 전각에 인가되는 펄스는 펄스 인가시간, 플래토(plateau)시간, 펄스 회복시간으로 구성되어 이들 세 가지 시간 구간에 따라서 전위의 변화를 측정하여 형성되는 전계를 관찰하였다. 빠른 방전 스위치의 동작특성을 이해하기 위하여 스위치 전극인가 전압의 인가시간 변화와 이에 따른 전압 변화율 및 인가전압의 크기에 따른 플라즈마 쉬스의 거동을 관찰하고, 그 크기가 펄스 변화율과 크기에 따라 변화함을 찾았다. 펄스의 회복시간 동안에 돌아오는 플라즈마 쉬스의 거동은 펄스의 인가시간동안의 변화와 유사한 거동을 보였으며 이때에도 펄스 회복율이 중요한 인자임을 알 수 있었다. 만일 펄스 변화율이 커서, 전극 앞에서의 쉬스의 거동 속도가 플라즈마 이온의 음속보다 빠르게 변할 때는 이온 매트릭스 쉬스의 거동형태를 따르고, 변화율이 늦어서 쉬스의 거동 속도가 이온의 음속보다 느리게 변하는 경우에는 Child-Langmuir 쉬스의 형태가 시간에 따라 전개됨을 알 수 있었다. 펄스 특성을 정량적으로 관찰할 수 있도록 스위치 전극에 흐르는 전류의 크기를 계산하기 위해 필요한 모델을 개발하여 실험견과와의 비교를 통하여 펄스 시간동안 플라즈마의 거동이 스위치를 흐르는 전류에 미치는 영향을 연구하였다.

• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.123-130
• /
• 2004

Routing and wavelength assignment(RWA) problem is an important issue in optical transport networks based on wavelength division multiplexing(WDM) technique. It is typically solved using a combination of linear programming and graph coloring, or path selection based graph algorithms. Such methods are either complex or make extensive use of heuristics. In this paper we propose a novel and efficient approach which basically obtains the maximum edge disjoint paths (EDPs) for each source-destination demand pair. And those EDPs obtained are stored in Lookup Table and used for the update of weight matrix. Routes are determined in order by the weight matrix for the demand set. The comprehensive computer simulation shows that the Proposed algorithm uses similar or fewer wavelengths with significantly less execution time than bounded greedy approach (BGA) for EDP which is currently known to be effective in practice.

• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.19-27
• /
• 2019

Fire extinguishing composite materials based on low-viscosity epoxy resin (EP) and containing 50 wt% of encapsulated fire extinguishing agent (EFA) have been studied. The positive effect of the EP on the kinetics and temperature of the EFA decapsulation was established. The EP increases the decapsulation temperature of the EFA from 130 ℃ to 155 ℃ and changes the kinetics of the decapsulation. The epoxy matrix increases the thermal stability of the EFA more than 3.9 times compared to that of the pure EFA. The protective effect of the EP on the storage stability of the EFA was validated. The mass loss of EP-containing EFA at 60 ℃ and 80% humidity over 96 h is 0.4%. The mass loss of pure EFA under the same conditions is 15%. A similar effect was observed under ultraviolet radiation: the EP-containing EFA loses 0.8% at pure EFA mass of 6%. The testing of alternative polymer matrixes has been considered.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.399-400
• /
• 2010

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.123-126
• /
• 2012

고도 컴퓨팅용 응용 프로그램 작성시 "에너지"를 감안하여 가급적 최단시간 내에 최소의 에너지로 해당 연산을 완료하는 설계정책을 고안하고자 한다. 이 논문은 연산과 I/O 비율이 상이한 두 알고리즘에 대해 에너지 소모특성분석, 전력효율 평가를 통해서 고효율 연산 설계법을 제시한다. 정렬 및 매트릭스 곱셈 알고리즘을 대상으로 실험하였고, 연구결과는 대규모 데이터 처리, 가공 등의 영역에서 그린 컴퓨팅을 실현하는데 기여할 것이다.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.11a
• /
• pp.118-120
• /
• 2005

본 연구는 송전선 주변 거주 초등학교 학생들을 대상으로 시간 활동 행태에 따른 여러 미세환경, 즉 주거환경, 학교환경, 학원, PC방, 교통에서의 자기장 노출수준을 다양한 매트릭스를 이용하여 비교 ${\cdot}$ 분석함으로써 연구대상자들의 활동한 미세환경 인자를 평가하여 시간별행동양식에 따른 24 시간 개인노출수준을 시간가중 평균모델을 이용하여 예측하고 비교 ${\cdot}$ 평가하였다. 본 연구는 154kV 고압 송전선로가 초등학교 옥상을 통과하는 B 초등학교 125명을 최종 선정하여 2003년 7월부터 2004년 2월 말까지 실시하였으며, 시간가중평균모델을 바탕으로 하여 자기장 노출량 평가 모델을 개발하였다. 전체 연구대상자들의 미세환경 내 평균 자기장값으로 계산한 시간가중 평균모델 (TWA model II)을 이용하여 예측된 자기장 개인노출수준을 보면 실측된 개인노출수준과 약간의 상관성을 보였다(Pearson r = 0.34 ${\sim}$ 0.35). Spot 측정한 값과 24 시간 stationary 측정값을 이용한 TWA Model II-2로 예측한 결과 실측값간의 상관성이 0.65 ${\sim}$ 0.85 로 산출되어 TWA 모델 중 가장 실측값을 잘 설명하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.495-508
• /
• 1994

A backcalculation procedure to determine the layer moduli of flexible pavement structure is developed using matrix solution technique. Forward calculation computer program adopted in this backcalculation procedure is SINELA which is one of layered elastic computer programs. Data base system is used as a tool for setting initial seed moduli and depth to virtual bedrock in backcalculation procedure. The validity and applicability of the proposed backcalculation procedure are verified through various numerical model tests. From the results of comparison analysis with FPEDD1, it is found that the proposed procedure gives more efficient and accurate results.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.187-195
• /
• 2009

Recently, with the development of ubiquitous computing, the study and development about context awareness models is required for the application of ubiquitous environment. This paper presents the design and implementation of a matrix based context awareness model for vehicle environment. The matrix construction method using 5W1H and CAM (Context Awareness Model) expression is proposed for context awareness modeling. The system with the proposed model is implemented by Zigbee modules for the recognition of individual identification and position and a navigator for current spatial and temporal information of GPS. The result of experiments shows that the proposed model is available.