• Korean Journal of Weed Science
• /
• v.4 no.2
• /
• pp.143-148
• /
• 1984

Experiments were carried out to study the germination and emergence of the red rice(sare) as a weed, Mong-geun sare, Sal sare, Ginkarag sare, Galsaegsal sare, Galsaegkarag sare. The germination and emergence of red rice were not greatly affected by soil salinification, soil pH and air temperature. Especially, in deep molding volume, emergence of red rice was greater than rice cultivar. It was considered to be due to the vitality of the mesocotyl. Submergence was expected to be a better way to control the red rice because germination rate of red rice was low under submergence.

• Economic and Environmental Geology
• /
• v.48 no.6
• /
• pp.501-508
• /
• 2015

The purpose of this study is to provide an inquiry into paleovegetation (paleoenvironment), eruption age and inferred emplacement temperature of pyroclastic deposit using charcoal occurred in the Quaternary Nari Caldera, Ulleung Island. In order to obtain the data, we carried out species identification and tree-ring analysis, radiocarbon dating for the charcoal. This sample was collected from pumiceous deposit in lowermost member(Member N-5) of the Nari Tephra Formation, which corresponds to the wood branch that has well preserved the tree-ring structure. Speciation and outermost tree-ring of wood reveal Picea spp. and $263+{\alpha}$ years. The calibrated ages from the center(pith) to the outermost tree-ring are $20,260{\pm}230$, $19,995{\pm}245$, and $19,975{\pm}265cal\;BP$, respectively, which are accordant with the tree-ring position. The youngest age, <19,710 cal BP would have implications for the eruptive age of Member N-5. Our results indicate that Picea spp. is the paleovegetation representing that Nari Caldera was under cold and wet climate conditions during the late Pleistocene. Based on the silky luster, brittleness, color, and streak of charcoal, etc., the lowest emplacement temperatures of pyroclastic flow are interpreted to have been at least as high as $350{\sim}500^{\circ}C$.

• Restorative Dentistry and Endodontics
• /
• v.25 no.2
• /
• pp.243-253
• /
• 2000

The purpose of this in vitro study was to evaluate dentin bonding by two different dentin bonding systems(DBS) using acetone based primer or adhesive [All Bond 2(AB2), One Step(OS)] when they were applied by wet or dry bonding technique. Morphology of resin-dentin interface and hybrid layer thickness(HLT) were investigated using Confocal Laser Scanning Microscope(CLSM) and compared to shear bond strength(SBS). 72 extracted sound human molars were randomly divided into 4 groups of 18 teeth each - Group 1.(AW); AB2 by wet bonding. Group 2(AD); AB2 by dry bonding. Group 3.(OW); OS by wet bonding, Group 4.(OD); OS by dry bonding. In 6 teeth of each group, notch-shaped class V cavities(depth 2mm) were prepared on buccal and lingual surface at the cementoenamel juction(12 cavities per group). To obtain color contrast in CLSM observation, bonding resins of each DBS were mixed with rhodamine B and primer of AB2 was mixed with sodium fluorescein. Prepared teeth of each group were treated with AB2, OS, respectively according to the manufacturer's instructions except for dentin surface moisture treatment after acid etching. In group 1 and 3, after acid etching, excess water was removed with wet tissue(Kimwipes), leaving consistently shiny, visibly hydrated dentin surface. In group 2 and 4, dentin surface was dried for 10 seconds at 1 inch distance. The treated teeth were then packed with composite resin(${\AE}$litefil) and light-cured. 12 microscopic samples($60{\sim}80{\mu}m$ thickness) of each group were obtained after longitudinal section and grinding(Exakt cutting and grinding system). Morphological investigation of resin-dentin interface and HLT measurement using CLSM were done. For measurement of SBS, remaining 12 teeth of each group were flattened occlusally to remove all enamel and grinded to 500 grit SiC(Pedemet Specimen Preparation Equipment). After applying DBS on the exposed dentin surface, composite resin was applied in the shape of cylinder, which has 5mm diameter, 1.5mm thickness, and light cured. SBS was measured using Instron with a crosshead speed of 0.5mm/min. It was concluded as follows, 1. HLT of AW(mean: $2.59{\mu}m$) was thicker than any other group, and followed by AD, OW, OD in descending order(mean; 2.37, 2.28, $1.92{\mu}m$). Only OD had statistically significant differences(p<0.05) to AW and AD. 2. There were intimate contact of resin and dentin at the interface in wet bonding groups, but gaps or irregular interfaces were observed in dry bonding groups. 3. The length, diameter, density of resin tags were various even in the same group without significant differences between groups and lots of adhesive lateral branches were observed. 4. There were no statistically significant difference of SBS between AB2 and OS, but SBS of wet bonding groups were significantly higher(p<0.05) than dry bonding groups. 5. There were no consistent relationships between HLT and SBS.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.2
• /
• pp.173-185
• /
• 2012

Authors performed pollen analysis in deposits at a coastal plain at Yeongjong-do Island located in Incheon, South Korea. Sampling site (7.2 m a.s.l.) belongs to the cool temperate deciduous broad-leaf forest. Environmental changes since 8,900 yrs B.P. reconstructed from pollen analysis are as follows; JS-I stage (c.a. 8,900~8,500 yrs B.P. ) was cool temperate northern mixed-forest which is comparable to the early PostGlacial pollen stage RI in Japan, in which Pinus and Quercus were dominant and Abies and Picea were also found. At that time, climate was relatively cooler and dryer than today. JS-II stage (sometime between 8,500~4,000 yrs B.P.) was Pinus-dominant coniferous forest, which is comparable to the mid-Post-Glacial pollen stage RII. Mixed forest of Pinus, Quercus and Carpinus was dominant in JS-III stage (c.a. 4,000 yrs B.P). We assumed that JS-II and JS-III stage were relatively warmer and more humid than JS-I stage, and were more like present conditions. JS-IV stage (sometime between 4,000~900 yrs B.P.) was Pinus-dominant coniferous forest which is comparable to the late Post-Glacial pollen stage RIII. JS-V stage (c.a. 900 yrs B.P. ~present) was second growth Pinus-dominant coniferous forest stage. During the last stage, non-arboreal pollen was more common than arboreal pollen and Fagopyrum appeared among the herbaceous plant, which indicates that it is comparable to the RIIIb stage which was the age of human interference. From the JS-V stage, humans in the study site started agricultural activities.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.329-342
• /
• 2003

Most of the existing multicast routing protocols for ad-hoc networks do not take into account the efficiency of the protocol for the cases when there are large number of sources in the multicast group, resulting in either large overhead or poor data delivery ratio when the number of sources is large. In this paper, we propose a multicast routing protocol for ad-hoc networks, which particularly considers the scalability of the protocol in terms of the number of sources in the multicast groups. The proposed protocol designates a set of sources as the core sources. Each core source is a root of each tree that reaches all the destinations of the multicast group. The union of these trees constitutes the data delivery mesh, and each of the non-core sources finds the nearest core source in order to delegate its data delivery. For the efficient operation of the proposed protocol, it is important to have an appropriate number of core sources. Having too many of the core sources incurs excessive control and data packet overhead, whereas having too little of them results in a vulnerable and overloaded data delivery mesh. The data delivery mesh is optimally reconfigured through the periodic control message flooding from the core sources, whereas the connectivity of the mesh is maintained by a persistent local mesh recovery mechanism. The simulation results show that the proposed protocol achieves an efficient multicast communication with high data delivery ratio and low communication overhead compared with the other existing multicast routing protocols when there are multiple sources in the multicast group.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.267-274
• /
• 2017

This study discusses the applicability of environmental friendly EVA based butyl rubber self-adhesive waterproof sheet designed to prevent corrosion of large scale pipes used in the water treatment facilities during th water treatment process. The experiments conducted tested the waterproofing sheet's adhesion strength on the steel surface of the pipes and checked for whether the material has the proper response properties against the various environmental conditions. In addition, it the sheet adhered to the steel pipe was to see if the adhesion hold against the water pressure due to the ingress of inflow water. Finally, the waterproofing sheet's adhesion strength was tested on a rusted steel surface to confirm whether the material has the necessary properties to secure stable adhesion strength and prevent corrosion of steel pipes at the same time during the process of installation or maintenance. As a result, the self-adhesive waterproof sheets showed that all attachments in the untreated, long term pressuring, immersion in chemical substance (hydrochloric acid, hypochlorous acid, sodium hydroxide), low temperature ($-20^{\circ}C$) conditions showed a adhesion performance of higher than 1.5N/mm, which is the performance standard of KS F 4934. Also, in the testing to check for the adhesion property against inverse water pressure, it was observed that the adhesion failure did not occur even up to $3.0N/mm^2$ pressure. Also, in the process of assessing the adhesion performance on rusted steel surface, specimens after 12 hours of corrosion treatment was shown to have 2.1N/mm, and specimens after 168 hours of corrosion treatment was shown to have 2.0N/mm adhesion strength performance.