• Conservation Science in Museum
• /
• v.9
• /
• pp.67-83
• /
• 2008

This study is process of conservation treatment for textiles and custumes containing Jikgeum(weave with supplementary golden wefts) and Bugeum(Gold sticking) among excavated ones(including all of Sinsu751) of Cheongyeongunju (a princess) collected by the National Museum of Korea. Adhesive strength was reinforced by coating 2% solution of glue on layer of gold disintegrated in the course of depletion of gold(Au) on the surface after conducting nondestructive test(X-ray fluorescent analysis) of flat gold strip and gold sticking. To remove dust on the surface and polluted materials, dry cleaning through vacuum suction and spray-type wet cleaning were conducted simultaneously and damaged part was restored to recover the relics to original state.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.1
• /
• pp.75-81
• /
• 2017

The effects of KOH pretreatment and annealing conditions on the interfacial adhesion and the reliability between epoxy resin and polyimide substrate in the flexible printed circuit board were quantitatively evaluated using $180^{\circ}$ peel test. The initial peel strength of the polyimide without the KOH treatment was 29.4 g/mm and decreased to 10.5 g/mm after 100hrs at $85^{\circ}C/85%$ R.H. temperature/humidity treatment. In case of the polyimide with annealing after KOH treatment, initial peel strength was 29.6 g/mm and then maintained around 27.5 g/mm after $85^{\circ}C/85%$ R.H. temperature/humidity treatment. Systematic X-ray photoelectron spectroscopy analysis results showed that the peel strength after optimum annealing after KOH treatment was maintained high not only due to effective recovery of the polyimide damage by the polyimide surface treatment process, but also effective removal of metallic ions and impurities during various wet process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.338-338
• /
• 2012

사파이어 ($Al_2O_3$)는 높은 밴드갭 에너지 (~19.5 eV)를 가진 물질로서 우수한 내마모성, 강도, 전기 절연성 및 안정한 화학적 특성을 갖고 발광다이오드 기판, 보석재료 등 각종 산업 및 기술적 분야에서 널리 사용되고 있다. 특히, 플립칩 발광다이오드 구조의 경우 광추출효율을 향상시키기 위해 높은 투과도를 갖는 사파이어 기판이 요구되어 왔으며, 지금까지 건식/습식식각방법을 이용한 사파이어 표면에 마이크로 크기의 심한 거칠기 또는 요철이 형성된 나노크기의 격자구조를 형성시키는 연구가 진행되어 오고 있다. 그 중, 나노 크기의 격자구조는 공기에서 반도체 기판까지 선형적인 유효굴절률 분포를 갖기 때문에 표면에서 생기는 Fresnel 반사 손실을 줄일 수 있다. 이러한 구조를 형성하기 위해서는 식각 마스크가 필요한데, 형성 방법으로 레이저 간섭 리소그래피, 전자빔 리소그래피, 나노임프린트 리소그래피 등이 있으나, 비싼 가격과 복잡한 공정 절차 등의 단점을 지니고 있다. 따라서 본 연구에서는 식각 마스크 패턴을 위해, 보다 저렴하고 간단한 실리카 나노구 및 열적응집 금 나노 입자를 이용하였다. 양면 폴리싱 c-plane 사파이어 기판을 사용하였고, 단일 층의 주기적인 실리카 나노구를 기판 표면에 스핀코팅에 의해 도포한 후 유도결합플라즈마 식각 장비를 이용하여 식각하여 주기적인 패턴을 갖는 렌즈모양의 격자구조를 형성하였다. 그리고 주기적으로 형성된 격자 위에 열 증착기를 이용하여 금 박막을 증착한 후 급속열적어닐닝(rapid thermal annealing)을 이용하여 열처리함으로써 비주기적인 금 나노입자를 형성시켰다. 형성된 금 나노패턴을 이용하여 동일한 조건으로 식각함으로써 광대역 및 전방향성 높은 투과도를 갖는 원뿔 모양의 사파이어 나노구조를 제작하였다. 제작된 샘플의 패턴 및 식각 형상은 전자현미경을 사용하여 관찰하였으며, UV-vis-NIR 분광광도계 (spectrophotometer)를 사용하여 투과율을 측정하였다. 렌즈 모양 표면 위에 원뿔모양의 나노구조를 갖는 사파이어 기판은 일반적인 사파이어 기판보다 향상된 투과율 특성을 보였다.

• Economic and Environmental Geology
• /
• v.8 no.4
• /
• pp.175-182
• /
• 1975

The chemical similarity of the magnetite-bearing amphiboltes of the Yangyang iron mine to mixtures of sedimentary pelites and limestone or dolomite and to the Gyeonggi para-amphibolites (So, 1974) is consistently indicated by all the chemical data of the rocks. Eight amphibolite samples were each analyzed for 18 elements, by wet chemical and emission spectroscopic methods, and these chemical data were compared with the para-amphibolites from the Gyeonggi metamorphic complex. Petrography and oxidation ratios were also considered.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.61-68
• /
• 2017

The key quality attributes of the pressed powder, one of base makeup products, are skin-affinity and spreadability. In general, there was a limit to meet skin-affinity and spreadability simultaneously, which are opposite attributes each other. In this study, air jet mill process was tried to satisfy two main properties. Skin-affinity was improved by a wet coating of sericite with a mixture of lauroyl lysine (LL) and sodium cocoyl glutamate (SCG). The application of mono-dispersed polymethyl methacrylate (PMMA) and diphenyl dimethicone/vinyl diphenyl dimethicone/silsesquioxane crosspolymer (DDVDDSC) improved both qualities. Air jet mill process has been mainly applied in the pharmaceutical and food industries, and is a method used for processing powder materials in cosmetic field. In this study, we were able to complete makeup cosmetics with an optimum particle size $6.8{\mu}m$ by combining the air jet mill process at the manufacturing stage. It was confirmed that the Ti element was uniformly distributed throughout the cosmetics by EDS mapping, and that the corners of the tabular grains were rounded by SEM analysis. It is considered that this can provide an effect of improving the spreadability when the cosmetic is applied to the skin by using a makeup tool. LL with excellent skin compatibility and SCG derived from coconut with little skin irritation were wet coated to further enhance the adhesion of sericite. SEM images were analyzed to evaluate effect of the dispersion and uniformity of PMMA on spreadability. With the spherical shapes of similar size, it was found that the spreading effect was further increased when the distribution was homogeneously mono-dispersed. The dispersion and spreadability of PMMA were confirmed by measuring the kinetic friction and optimal content was determined. The silicone rubber powder, DDVDDSC, was confirmed by evaluating the hardness, spreading value, and drop test. Finally, it was found that the dispersion of PMMA and silicone rubber powder affected spreadability. Such makeup cosmetics have excellent stability in drop test while having appropriate hardness, and good stability over time. Taken together, it is concluded that air jet mill process can be utilized as a method to improve skin-affinity and spreadability of the pressed powder.