• Environmental engineer
• /
• v.21 s.210
• /
• pp.68-71
• /
• 2004

[ $\circ$ ] 본 기술은 기존의 A2O공법과 Sludge Blanket Filtration(SBF)을 단위공법으로 조합한 공정으로서 각 생물반응조의 미생물 농도를 6,000mg/ 이상의 고농도로 운전하여 생물학적 유기물,질소 및 인 제거효율을 극대화하고자 하는 기술 $\circ$ 또한 활성슬러지 반응조로부터 유입된 슬러지를 SBF에서 미세기포를 이용하여 부상시킴으로써 수면에 농축 슬러지층을 형성시키고 이 부

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5628-5636
• /
• 2012

Effective drying method of sewage sludge is researched in this study. To dry the sludge, chain crusher flash dryer was adopted to remove moisture content in the cell which is mostly responsible for the sludge moisture content. And Pilot plant experiment was conducted in real life sewage treatment plant to study effect and characteristics of operating conditions. Operating variables include sludge feeding rate, rotational speed of chain, process temperature and feed moisture content. As rotational speed of chain increased, product yield of sludge increased, and the performance of the testing system increased. And, as process temperature increased, the sludge drying efficiency increased. It is found that optimum feed moisture content is at 60% which shows the maximum sludge product yield and about 10 moisture content(%) of sludge product. Sludge feed rate showed optimal value, and when the sludge feed rate is exceeded, sludge product yield did not increased but the amount of residue increased. Pilot plant experiment results are as follow. The optimal condition for the rotational speed of chain 1600rpm(max. speed), final sludge discharge temperature $80^{\circ}C$, feed moisture content 60%, and feed rate 60kg/h. When the plant was operated at the optimal conditions, the final product showed fairly good results such as sludge product yield 85.5%, moisture content 11.0% and sludge drying efficiency 81.7%.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.665-675
• /
• 2010

The effects of chemical binders (ladle slag, ordinary portland cement (OPC), hydroxyapatite and calcium hydroxide) on the solidification/stabilization of heavy metals (Cd, Cu, Ni, Pb, Zn) in sewage sludge were evaluated by chemical leaching tests such as EDTA extraction, TCLP and sequential extraction. The results of EDTA extraction showed that heavy metal concentrations in sewage sludge were highly reduced after solidification/stabilization with slag, cement or calcium hydroxide. However, EDTA interrupted solidification/stabilization of heavy metals by hydroxyapatite. The TCLP-extracted heavy metal concentrations in sewage sludge after solidification/stabilization with chemical amendments were highly reduced. However, Cu concentration in the sewage sludge solidified/stabilized with slag, cement or calcium hydroxide increased because the pH of TCLP solution was higher than 7. Mixtures of sludge 1 : slag 0.2 : calcium hydroxide 0.1 (wt ratio) showed the least leachability in batch TCLP and EDTA extraction. The results of sequential extraction (SM&T, formaly BCR) indicated that the distribution of heavy metals changed from exchangable and carbonate fractions to strongly bound organic fraction. It was found that maximum leachate concentrations of Ba, Cd, Cr and Pb from sewage sludge amended with slag and calcium hydroxide were far below US EPA TCLP regulations.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.7
• /
• pp.488-494
• /
• 2012

This study was conducted to determine the optimal ratio of sludges from milk processing industry (MPS), paper-mill industry (PMS) and night-soil treatment plant (NSS) for vermicomposting. Five different ratios, 0 : 80 : 20 (MPS-0), 25 : 60 : 15 (MPS-25), 50 : 40 : 10 (MPS-50), 75 : 20 : 5 (MPS-75), and 100 : 0 : 0 (MPS-100 : control) MPS : PMS : NSS by wet weight were tested in a small plot experiment. The experiment for each mixing ratio was performed for 2 weeks with the three replications. MPS-100 (100 : 0 : 0) only had the highest decomposition rate with 19.9%, followed by MPS-25, MPS-50, MPS-75 and MPS-0 with 19.5, 19.1, 17.6 and 16.7%, respectively. Except for MPS-100, Vermicomposting resulted in increase in ash, T-P, $NO_2{^-}-N$, $NO_3{^-}-N$, Mg, K, As, Cd and Cu, whereas moisture, VS (Volatile Substance), TKN (Total Kjeldahl Nitrogen), $NH_4{^+}-N$, Ca, Hg and Pb were lower in the final cast than the initial feed mixture. Meanwhile Zn showed very slight difference and Cr and Ni did not show any tendency between the feed mixture and the final cast. In the case of MPS-100, where the decomposition rate was the highest, all the heavy metals in the final cast except for Hg were increased. All the vermicomposts produced from five different mixing ratios of the vermicomposting sludges met the Korea Standard as by-product compost.

• Economic and Environmental Geology
• /
• v.56 no.4
• /
• pp.409-419
• /
• 2023

Acid mine drainage(AMD) treatment is classified as both passive and active treatment. During the treatment, about 5,000 tons of neutralization sludge is generated as a by-product per year in Korea. This study was conducted to evaluate the characteristics of sludge generated from physico·chemical treatment processes as an active treatment from 5 different sources (D, H, S, T, Y) and the possibility of the sludges being recycled. The sludges have a pH range of 5.86 ~ pH 7.89, and a water content range of 51% ~ 82%. Most of particle sizes were less than 25 ㎛. In analysis of inorganic elements, the concentration of Al, Fe, and Mn were between 1,189 mg/kg ~ 129,344 mg/kg, 106,132 mg/kg ~ 338,011 mg/kg, and 3,472 mg/kg ~ 11,743 mg/kg, respectively. The concentration of As and Zn in sludge-T, Cd in sludge-D, Ni in sludge-H, Zn in sludge-S, and Cd in sludge-Y exceeded the soil contamination standards of Korea. The results from 2 separate kinds of leaching test, the Korea Standard Leaching Test(KSLT) and Toxicity Characteristic Leaching Procedure(TCLP), showed that all the sludges met the Korea groundwater standards. From the XRD and SEM-EDS analysis, the peaks of calcite and quartz were found in the sludges. The sludge also had a high proportion of Fe and O, and the majority of the composition was amorphous iron hydroxide.

• Journal of Korean Society of Disaster and Security
• /
• v.10 no.1
• /
• pp.55-60
• /
• 2017

The dyeing sludge can be weakened by inflow of rainfall or absorption of moisture after it is buried in a waste landfill. This study tested the dyeing sludge and earth/sand mixture to check the problem when the dehydrated dyeing sludge is buried in a waste landfill. When the dyeing sludge was left idle with high water content inside a landfill with poor draining for a long period, the water permeability decreased to around 3/100 level and the compressibility increased by 1.4 times compared to the dyeing sludge at a dyeing factory. The study result indicated that it was important to reduce the water content inside the landfill for stability. Also, the facilities to secure the drainage path and eliminate leachate were needed.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.2
• /
• pp.57-64
• /
• 2013

In this paper, in order to solve high water content of water sludge and promote its recycle, sludge mixtures with various mixing ratios were produced. Sludge mixture consisted of water sludge and weathered granite soil. Their physical properties and unsaturated characteristics (soil-water characteristic curve, and unsaturated permeability function) were investigated by laboratory tests. Experimental test results indicated that at a given matric suction volumetric water content of sludge mixture increased as water sludge content increased. Air entry values of sludge mixture increased from 0.9 kPa to 2.4 kPa with an increase in water sludge content or fine content. In addition, unsaturated permeability function, which is an important factor for performing infiltration analysis, was predicted using saturated permeability and soil-water characteristic curve of sludge mixture.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.4 no.1
• /
• pp.53-60
• /
• 1996

This study was carried out to investigate the effects on the growth of soybean and carrot, and these uptake of inorganic components, after the application of sewage sludge disgested anaerobically at wastewater treatment plant for about 25 days. With the application of the sludge, some chemical properties of soil was improved and heavy metals, as Pb, Cd, Cr, As and Hg, in finally harvested crops were not detected. With an increase in the application of the sludge, the uptake of N, P, K, and Ca in carrot was increased and also in the yield of two crops. In related to the quality of carrot, however, application of unmatured sewage sludge showed to deteriorate the visual quality with an irregularity of carrot's surface, despite of the increase of ${\beta}$-carotene concentration with an increased application of the sludge. The results suggest that for a land application of sewage sludge it should be necessarily stabilized by means such as composting.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.482-482
• /
• 2010

하수처리장에서 발생하는 유기성 슬러지는 대부분 해양투기에 의해 처분되고 나머지는 매립, 소각, 퇴비화 등으로 처분된다. 그러나 런던협약 '96 의정서' 발효에 의해 2012년부터 해양투기가 금지되고, 매립장 및 소각장의 신규건설은 님비(NIMBY) 현상에 의해 제한받기 때문에 효과적인 슬러지 처분 및 가용화 방법이 요구되고 있다. 현재 초음파[1]나 열처리[2], 오존[3,4], 미생물 처리[5,6] 등 물리, 화학, 생물학적 처리방안이 연구되고 있으나 이러한 방법들은 에너지 과소비, 2차 오염물질 발생에 따른 처리비용 증가 등의 단점을 가지고 있다. 따라서 본 연구에서는 기존의 연구 방법을 보안하고자 전기분해를 활용하여 슬러지 가용화를 시도함으로써 슬러지 발생을 저감시킬 수 있는 방법을 연구하였다. 본 실험에서는 전기분해를 위해 제작된 불용성 전극은 Titanium에 Iridium을 코팅하여 제작하였고, 최대 20V까지 전압을 고정시키고 시간에 따라 변화되는 전류와 전기전도도, pH 값을 관찰하였다. 실험에 사용된 활성슬러지는 3개월간 합성폐수로 순응화 시킨 후에 시료로 사용하였다. 전기분해에 의해 처리된 활성슬러지의 여액을 분석한 결과 SCOD, TN, TP 농도가 각각 510%, 9%, 106% 증가하였다. 이는 전기분해에 의해 미생물의 세포벽이 파괴되어 세포 내 물질들이 세포 외부로 용출되어 미생물들의 이용이 가능한 상태로 되었음을 알 수 있었다. 이는 국내 하 폐수의 낮은 C/N비 때문에 무산소조에 메탄올 같은 외부 탄소원을 공급하는 대신에 별도의 탄소원 공급 없이 가용화 된 슬러지를 반송시킴으로써 슬러지 저감에 따른 폐기 비용과 운전비용의 절감을 기대할 수 있어, 근본적인 슬러지 발생을 저감시킬 수 있는 해결책이라 할 수 있다.

• Microbiology and Biotechnology Letters
• /
• v.32 no.2
• /
• pp.166-171
• /
• 2004

In this study, we introduced enzymatic pretreatment method, together with ozone treatment for sludge digestion. We optimized the amount of enzyme and ozone, respectively for the successful sludge pretreatment. As a result, we found that as more enzyme is used, higher sludge hydrolysis efficiency was obtained. When we treated sludge by ozone ranging from 0.01g $O_3$/g SS to 0.04 g $O_3$/g SS without enzyme treatment, 0.04 g $O_3$/g SS showed the highest increase of SCOD. Meanwhile, when protease was used together with the same ozone dosage ranges, 0.03g $O_3$/g SS ozonation resulted in the highest increase of SCOD. The sludge pretreatment was optimized by controlling the amount of enzyme and ozone.