• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.499-504
• /
• 2012

Characteristics of overall heat transfer were investigated in a three-phase slurry bubble column with relatively low surface tension media, which has been frequently encountered in the fields of industry. The heat transfer phenomena was examined in the system which was composed of a coaxial vertical heater and a proper of bubble column. The heat transfer coefficient was estimated from the measured mean value of temperature difference between the heater surface and the column proper at the steady state condition. Effects of gas velocity ($U_G$), solid fraction in the slurry phase ($C_S$) and surface tension (${\sigma}_L$) of continuous liquid media on the overall heat transfer coefficient (h) in the bubble column were determined. The mean value of temperature difference was estimated from the data of temperature difference fluctuations with a variation of time. The amplitude and mean value of temperature difference fluctuations with respect to the elasped time appeared to decrease with decreasing the surface tension of liquid phase. The overall heat transfer coefficient between the immersed heated and the bubble column increased with an increase in the gas velocity or solid fraction in the slurry phase, but it decreased with an increase in the surface tension of continuous liquid media. The overall heat coefficient in the slurry bubble column with relatively low surface tension media was well correlated in term of operating variables and dimensionless groups within this experimental conditions.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.278-279
• /
• 2002

소각시설에서 다이옥신 배출문제가 사회문제화 되면서 대부분의 소각시설이 소석회 슬러리 분무의 반건식세정기와 백필터가 연결된 공정에 분말활성탄을 분무하는 시스템으로 운영하고 있다 원래, 다이옥신이 사회문제화 되기 이전부터 소석회 슬러리 분무의 반건식 세정기가 소각시설에서 사용되었는데 이는 주로 산성가스 제거 및 백필터 보호차원의 온도조절기능이었다. 백필터의 경우도 전기집진기와 더불어 먼지를 제거하는 기능을 담당하는 방지시설이었다. (중략)

• Resources Recycling
• /
• v.25 no.3
• /
• pp.43-48
• /
• 2016

Cement manufacturing plant uses various kinds of industrial/municipal waste. The waste contains considerable amount of potassium, chlorine and small amount of heavy metal. Many researches were performed to fabricate valuable resources from the waste. In this study, various methods, which dissolves and crystallizes potassium/chlorine to extract potassium chloride, were experimented. Especially amount of water, slurry temperature, and stirring time were controlled. Then kind of heavy metal and content of potassium chloride were analyzed. The yield of potassium chloride increased, as the amount of water for slurry increased but it increased slightly, when the water content was over 200%. The yield tended to increase, when the temperature of slurry was over a certain point. The yield did not increase in case of over 10 minutes stirring time. The kind and content of heavy metal in potassium chloride were various according to stirring time. The main heavy metals were Pb, Cu, and $Cr^{6+}$.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.746-755
• /
• 2017

In this study, $CeO_2/TiO_2$ nanoparticle with structure of core and shell was synthesized by growing $TiO_2$ onto the surface of $CeO_2$ according to hydrolysis of $Ti(SO_4)_2$. Reaction time, temperature, concentration of $CeO_2$ slurry, pH control of $Ti(SO_4)_2$ were optimized about synthesis of $CeO_2/TiO_2$ core-shell nanoparticle. It was found that optimal mole ratio range of $CeO_2:TiO_2$ was 1:0.2~1.1, the optimal concentration of $CeO_2$ slurry was 1 %, and the optimal reaction temperature was $50^{\circ}C$. The optimal concentration of $CeO_2$ slurry could be increased up to 10 % by adjusting the pH of $Ti(SO_4)_2$ to 1 using $NH_4OH$ and adding to $CeO_2$ slurry. If reaction was carried at $80^{\circ}C$ or higher, the separated $TiO_2$ particles were obtained instead of $CeO_2/TiO_2$ core-shell nanoparticles. The optimal reaction temperature was $50^{\circ}C$ at which good shaped core-shell structure of $CeO_2/TiO_2$ was obtained.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.201-205
• /
• 2003

The optimum autolysis conditions were investigated to prepare yeast autolyzate (extract) using yeast slurry collected from brewery plants. Brewers yeast slurry was washed with caustic soda to eliminate bitter hof substances attached to yeast cell walks. The pH of brewers yeast slurry was adjusted to 9.8 with caustic soda, and centrifuged at 3,000 rpm for 5 min. The supernatant was discarded, and the bottom cake was rehydrated and collected. Bitterness unit (BU) of washed yeast slurry was 24.1 BU, below the threshold value of 25.0. Yeast extract could be obtained from washed brewers yeast slurry at maximum yield up to 38% by autolyzing at pH 6.8 and $53^{\circ}C$ for 20 h.

• Journal of Animal Environmental Science
• /
• v.14 no.3
• /
• pp.183-192
• /
• 2008

This study was carried out to investigate the temperature, water balance, evaporation and physicochemical properties during the composting with pig slurry at a scraper system. The pig slurry was composted on farm trial using continuous aeration with turning machine for 5 month. A compost facility of rectangular concrete bin with dimension of 53 m (length) ${\times}$ 4.6 m (width) ${\times}$ 2 m (height) was bedded with sawdust. The environmental parameters were monitored in period of 5 months. The results were as follows ; 1. During the composting period, the temperature was varied in the range $50{\sim}70^{\circ}C$. The temperature of compost pile was highest in middle layer and lowest in under layer. Temperature difference between middle and under area of compost pile was $5{\sim}20^{\circ}C$. 2. The water content of compost pile varied $50{\sim}68%$. In the period of 50% of water content of compost pile, the temperature of compost was $20{\sim}30^{\circ}C$ and was not successfully composted. 3. In this study, total evaporation was 90% during composting. The amount of slurry per $1m^3$ sawdust by this method was $3.16m^3$ without treatment of effluent output. 4. The chemical properties of produced compost was high, but suitable for plant growth. Concentration of T-N, T-C in the final compost were 1.62, 34%, respectively.

• Korean Journal of Materials Research
• /
• v.9 no.9
• /
• pp.865-871
• /
• 1999

Effect of sintering condition in mechanical properties of ZrSiO\ulcorner shell molds was investigated. Number of microcrack in primary layer of the mold was maximized after preheating at $1000^{\circ}C$ for 1.5 hours. Yield strength and specific surface area of the mold were inversely proportion to sintering temperature and time. After hot deformation test at $1500^{\circ}C$ for 4 hours, molds were deformed opposite to the loading direction and backup layers were cracked along the interface between stucco and zircon slurry. Reverse deformation of the molds during hot deformation test was considered to be resulted from the difference of thermal expansion coefficient between alumina stucco and zircon slurry in primary coat, and size difference between zircon stucco and zircon slurry in backup coat.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.7 no.1
• /
• pp.43-52
• /
• 1999

This study was carried out to investigate how much coal fly ash could be substituted for sawdust as a bulking agent for livestock waste composting. The mixtures of coal fly ash and sawdust in the weight ratio of 8 to 2, 7 to 3, 6 to 4, 5 to 5, 4 to 6, 3 to 7 and 2 to 8 were added to livestock waste as the bulking agent. The same amount of the bulking agents and livestock waste was mixed and composted during 21 days. Following effects were analyzed during composting experiment : the variation of temperature, pH and various compound contents. The results were summarized as follows: The more the sawdust was added, the higher the maximum temperature in slurry type livestock farm but faster it reached in scrapper type. Water content was maintained under good condition by adding the bulking agent mixed of the same amount of coal fly ash and sawdust. pH was in the range of 7~10 by adding the bulking agent mixed of the same amount of coal fly ash and sawdust. The more the sawdust was added, the higher organic matter content was measured. Nitrogen content with increasing the amount of sawdust added but it was higher did not showed any tendency Organic matter/Nitrogen ratio reduced during the composting period in scrapper type but it showed contrary tendency in slurry type with that of scrapper type.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.4
• /
• pp.348-353
• /
• 2010

The current study investigated the fate of organic matter in piggery slurry under two different store systems(closed store system and open store system) in association with different temperature. Thirty days after storing in both systems at $20^{\circ}C$, it was observed that the content of organic matter remained in piggery slurry with closed store system was twice more than that with open store system implying more efficient degradation of organic matter with open store system. Temperature also influenced on the organic matter degradation in piggery slurry as shown decline in TS and VS contents as the temperature increased. With store at $35^{\circ}C$, 29% of initial organic matter was reduced while there was only 23% reduction of organic matter at $20^{\circ}C$. There was no difference in the type of organic fatty acids(VFAs) produced under the range of temperature(20, $35^{\circ}C$) simulating summer condition. Increases in organic fatty acids contents with hydrolysis and acid producing microbial was observed from 15 days after initiating store of the piggery slurry and the total organic acid amount produced 30 days after store was $2,829\;mg{\cdot}COD/L$ and $9,123\;mg{\cdot}COD/L$ at $20^{\circ}C$ and $35^{\circ}C$, respectively. These corresponded to 5.4% and 17.4% of the initial organic matter contents in piggery slurry, respectively.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.77-85
• /
• 2012

Production process of the flexible ceramic foamed body through the complexation with the fiberous sepiolite and expanded pearlite was researched. The processing of fibrillation of the inorganic mineral fiber sepiolite is the most important whole processing for manufacturing of the ceramic foamed body consisting of the expanded perlite and sepiolite. The fibrous sepiolite and expanded pearlite are blended and becomes the slurry phase. And this slurry phase is converted to a massive foamed body through the low temperature heat treatment process less than $300^{\circ}C$. The heat-treatment process of the slurry phase composite has to be designed to include the evaporation step of the moisture remaining among the slurry composition, foaming step by the decomposition of the foaming agent, and resolution removal step of the organic material which was added in the composite remained after the foaming step. The heat treatment process should be considered as significant factors in design of total process. As to the condition of heat treatment process and foaming agent, there was the a correlation. An organic type foaming agent like DSS (dioctyl sodium sulfosuccinte) was effective in foaming of the slurry compound consisting of the expanded perlite and sepiolite fiber.