• 한국가정과학회지
• /
• 제7권3호
• /
• pp.35-48
• /
• 2004

In this study, by determining lower limb movements which cause significant changes in body surface lines, body parts with the greatest maximum expansion and contraction rate respectively were illustrated in descending order. Using unmarried female university students aged 18 - 24 as subjects, a total of 32 body surface categories (15 body surface lines and 17 body surface segment lines) were measured in one static and 9 movement poses. In particular, expansion and contraction levels and rates were measured and used in the analysis. The analysis first involved the calculation of the average measurement per body part in body surface line in static pose as well as of the average expansion and contraction levels and rates in 9 lower limb movements. Two-way MANOVA and multiple comparison analysis (Tukey) were conducted on movements and individual somatotypes regarding measurement per body part and expansion and contraction rates. Movements which cause measurements of body surface lines differed significantly in body surface line in static pose versus in movement were then identified. Among average expansion and contraction rates in such movements, maximum average expansion and contraction levels, maximum average expansion and contraction rate, and classes of expansion and contraction rate were determined per body part. The results of this study are as follows. First, 5 lower limb movements; F2, F5, F6, F7, F8, which caused significant changes in body surface lines were determined and illustrated in table 4. Second, the levels, rates, and classes of expansion and contraction rate per body part are illustrated in Tables 5 and 6. Body parts with the greatest maximum expansion rate were, in descending order: upper segment of center back leg line, upper segment of inner leg line, middle segment of center front leg line, posterior crotch length, anterior knee girth, anterior thigh girth, center back leg line, girth at crotch height, anterior midway thigh girth, hip girth, anterior crotch length, knee girth, waist girth, inner leg line, thigh girth, and crotch length. Those with the greatest maximum contraction rate were, in descending order: anterior crotch length, upper segment of center front leg line, lower segment of center back leg line, center front leg line, and posterior thigh girth. The maximum expansion rates and maximum contraction rates, which ranged from 2.05 to $35.95\%$ and from -0.20 to $-30.16\%$ respectively, were classified per body part into 4 ABCD classes. The body part with maximum expansion was the upper segment of the center back leg line at vertical body surface line, expanding by $35.95\%$ or 16.03cm in F5 flexion movement. In contrast, the body part with maximum contraction was the anterior crotch length at vertical body surface line, contracting by $-30.16\%$ or -10.54cm in F5 flexion movement. Both, however, were the body parts to expand or contract the most among all horizontal and vertical body surface lines.

• 한국가정과학회지
• /
• 제7권3호
• /
• pp.15-33
• /
• 2004

A precise understanding of the human form in static pose serves as the basis of designing clothing. When the human body is in motion, however, even an article of clothing designed to fit the human form in static pose can pull and change, thus restricting the body. In order to increase the fit of the clothing, which may be termed the second skin, its form and measurements therefore must be determined in correlation not only with the formal characteristics of the human body, in static pose but also with its functional characteristics in motion, as caused by the movements of the human body. In this study, the motion factor was selected as the primary basis for designing slacks with good fit in both static and moving states. By indentifying the areas in which lower limb movement cause significant changes in body surface lines, we suggest several application methods for designing slacks. Using unmarried female university students aged 18 - 24 as subjects, a total of 32 body surface categories (15 body surface lines and 17 body surface segment lines) were measured in one static and 9 movement poses. In particular, expansion and contraction levels and rates were measured and used in the analysis. The analysis first involved the calculation of the average measurement per body part in body surface line in static pose as well as of the average expansion and contraction levels and rates in 9 lower limb movements. Two-way MANOVA and multiple comparison analysis (Tukey) were conducted on movements and individual somatotypes regarding measurement per body part and expansion and contraction rates. Body parts whose measurements of body surface lines differed significantly in body surface line in static pose versus in movement were then identified. The results of this study are as follows. First, changes in body surface lines caused by lower limb movements were significant in all body surface lines of the lower trunk, both horizontal and vertical, with the exception of abdomen girth, midway thigh girth, ankle girth, hip length, and posterior knee girth. Second, significantly expanded 10 body surface lines in moving pose were detected and illustrated in table 4. These body parts should be studied in designing or pattern designing, especially for close-fitting pants, in using stretch fabric, and in sensory evaluation of good fit during movement.

• 패션비즈니스
• /
• 제12권2호
• /
• pp.87-99
• /
• 2008

This study aims to classify lower trunk body types of Chinese men in their middle age (30s and 40s) and suggest the standard for them to design slacks pattern. Mollison's relation deviations were used to analyze the direct measurement items in this research compared to those of Size Korea 2004. Though Korean middle-aged men were higher in most items than Chinese counterparts, all items except mid-thigh circumference and side hip length were merely within the range of ${\pm}1\sigma$. According to the results of size classification by absolute values, factor analysis extracted to 2 factors(horizontal size of lower body and vertical size of lower body), and cluster analysis brought about 3 types(type1: tall and thin trunk (36.9%), type 2 : normal height and thick trunk(45.5%), and type 3 : short and normal trunk(17.6%) with some significant differences among them. Also, the results of shape classification by index values, they were extracted 4 factors (waist-hip flatness, waist-hip cross section, vertical waist-groin and hip-surface length) by factor analysis and revealed 3 types(type 1: different waist-hip width, thick, long waist, long upper hip, and short hip-surface length(27.8%), type 2 : different waist-hip width, flat, short upper hip, high hip and groin, and average hip-surface length(29.4%), and type 3: small waist-hip width, thick, average upper hip, and short hip-surface length (42.8%)) with significant differences among them by cluster analysis. The results of standard body types by shape-size combination, 19subjects(10.16%) under these values are regarded as standard body types. Significance was not seen in all items in the t-test results between the total group and the standard group. The latter had lower variation coefficients and smaller individual differences than the former. However, in-depth research is required for generalization since this research is limited to a small number of subjects in Ningbo of Zhejiang.

• 한국의류학회지
• /
• 제26권12호
• /
• pp.1765-1777
• /
• 2002

본 연구에서는 현재 국내의 서울시내에 거주하는 모터사이클을 타는 만20세 이상의 남성을 대상으로 모터사이클복에 대한 착용실태와 불만사항들을 조사하고 이를 연령별, 모터사이클 유형별로 비교 분석하여 착용감 및 안전성이 향상된 모터사이클복 개발을 위한 기초자료를 제시 하고자 하였다. 설문조사는 2002년 1월~3월까지 3개월간 총 400부를 배부한 후 회수하고, 이 중 262부를 분석자료로 사용하여 빈도 및 백분율, 평균 등의 기술 통계치를 얻어 전반적인 착용현황을 알아보고, 교차분석을 실시한 후 X$^2$-검증을 실시하여 연령별, 모터사이클 유형별, 운행경력 별로 통계적인 차이를 비교 분석하였다. 1. 모터사이클복의 착용실태 및 불만사항 전반에 관한 조사결과, 조사대상자는 20대~40대의 운행경력은 5년 이상인 전문 라이더들이 많았으며 모터사이클의 배기량은 400cc이상이 가장 높게 나타났고, 모터사이클 유형은 로드 바이크가 가장 높게 나타났고, 이용목적은 레져.취미용, 선호하는 모터사이클복 아이템별 소재는 원피스와 슬랙스의 경우에는 피혁소재가 쟈켓의 경우에는 텍스타일 소재가 높게 나타났다. 아이템별 소유는 쟈켓과 투피스가 높게 나타났고, 보호구가 필요하다고 생각되는 신체부위는 상의에서는 가슴과 팔꿈치, 하의에서는 무릎으로 나타났으며, 무릎보호대의 소유도가 가장 높게 나타났다. 모터사이클복 주된 착용목적은 '부상방지', 모터사이클복을 착용하지 않는 이유는 '움직이기가 불편해서' '가격이 비싸서' '여름철에 더워서'가 각각 높게 나타났다. 모터사이클복에 대한 불만족도에서 동작적합성과 사이즈에 대한 불만도가 높게 나타났고, 모터사이클복소재 및 내부 장착 보호장구의 경량화가 요구되었으며, 모터사이클 쟈켓의 치수부적합부위는 소매길이가 가장높게 나타났다. 2. 전체 응답자의 연령을 20대, 30대, 40대 이상으로 나누어 연령별 차이를 비교한 결과 각각의 문항에 대해서 모두 연령대별로 유의차가 인정되었다. 3. 모터사이클복 아이템별 선호소재 문항에서 원피스와 쟈켓에서 모터사이클 기종별 유의차가 나타났는데, 비즈니스 기종에 서는 텍스타일 소재를, 아메리칸크루져 기종에서는 피혁소재를 선호하였다. 로드바이크와 오프로드 기종에서는 원피스는 피혁소재를 선호하였고, 쟈켓은 텍스타일 소재를 선호하는 것으로 나타났다.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 추계학술대회논문집
• /
• pp.40-55
• /
• 1997

The purpose of this study are to examine the characters of the lower half body shape in the middle aged women and to make slacks patttern on the base of four difference body shapes as follows. The lower half body shapes were classified into 4 types on the basis of their lateral view silhouette, whose characters were summarized as followings. (1) "Type 1" meant the right body shape with the standard protrusion of abdomen and hips. (2) "Type 2" showed the body shape with prominent hips, which had the flat abdominal silhouette and the greatly curved hips silhouette. (3) "Type 3" was the body shape with the prominent abdomen and the flat hips, in which the frontal view silhouette of the abdomen was greatly curved and the rear view silhouette of hips is less curved. (4) "Type 4" was characterized with prominent abdomen and hips. The slaks patterns were based on the lower half body shape characters and resulted in followings. (1) In the type 1, little difference from conventional patterns was seen in experiment pattern, in which the front waist girth was W/4{\times}0.5cm+0.5cm+fold(2.5cm) and the back waist girth W/4+0.5cm-0.5cm+dart(3.5cm). The front hip girth was defined as H/4+2.0cm+0.5cm and the back hip girth as H/4+2.0cm-0.5cm due to its increased ease amount produced by abdominal fat deposition. (2) In the type 2 experimental pattern, the front and back differences of the waist girth and the hip girth were defined as 1.0cm and 2.0cm separately. Accordingly, the front waist girth was W/4+0.5cm+ 1.0cm+fold(2.0cm), the back waist girth W/4+0.5cm-1.0cm+dart(6.5cm), the front hip girth H/4+2.0cm+1.0cm and the back hip girth H/4+2.0cm-1.0cm. (3) In type 3, the front waist girth was set up as W/4+0.5cm+0.5cm+fold (4.5cm) for the increased front fold amount and the back waist girth was W/4+0.5cm+0.5cm+dart(3.0cm). The front hip girth was made as H/4+2.5cm+0.5cm and the back hip girth H/4+2.5cm-0.5cm. (4) In type 4, considered were $\circled1$ the increased fornt fold amount due to the abdonimal protrusion, $\circled2$ the increased back dart amount and the decreased back dart length owing to the hips prominent and $\circled3$ the front and back differences of waist and hip girth for the lateral view silhouette. Therefore the front waist girth was defined as W/4+0.5cm+2.0cm+flod (5.0cm), the back waist girth as W/4+0.5cm-20.cm+dart(4.0cm), the front hip girth as H/4+2.0cm+1.0cm and the back hip girth as H/4+2.0cm-1.0cm. The sensory evaluation of appearance and comfort was appeared more suitable on the experiment pattern than on the conventional pattern.

• 복식문화연구
• /
• 제31권6호
• /
• pp.793-805
• /
• 2023

This study analyzes the body shapes of lower-body obese female adolescents and proposes a slacks pattern suitable for their body type. Lower-body obesity is a prevalent type of teenage obesity, and our proposals aim to improve consumer satisfaction in ready-to-wear clothes across this demographic. We first observe characteristics of obese lower bodies, noting significantly above-average thigh and hip circumference. These figures indicate a high degree of curvature in obese lower bodies, along with a large drop value. Leveraging this data, we develop a novel slacks pattern using 3D avatars in a virtual simulation system. The formulas for the main areas of the pattern are as follows: front waist girth W/4+0.75cm+0.5cm, back waist girth W/4+0.5cm-0.5cm, front hip girth H/4+1.25cm-0.5cm, back hip girth H/4+2cm+0.5cm, front crotch extension H/16+0.5cm, back crotch extension H/8+1cm. Results from appearance evaluations show that this pattern minimizes strain rate on the waist and hips, and its average score is significantly higher than that of an alternative pattern that was also evaluated. The minimized strain rate and high average score indicate that our pattern assigns a sufficient amount of space to the appropriate areas. Based on these results, we expect our research to inform slacks pattern development and production for obese consumers of all types.

• 한국가정과교육학회지
• /
• 제18권1호
• /
• pp.113-125
• /
• 2006

본 연구는 여중생의 신체부위 크기인식이 실제 착의 의복형태에 어떠한 영향을 미치는지 살펴보기 위하여 신체크기 인식과 신체만족도, 희망 착의의복형태, 실제착의 의복형태를 고찰하였으며, 수척/비만정도에 의해 집단을 분류하여 집단간착의 의복형태의 차이도 고찰하였다. 조사 대상자는 광주 소재의 중학교에 재학 중인 여중학생 219 명이었으며 설문지를 이용하여 결과를 얻었다. 결과분석은 Window SPSS 10.0 패키지를 이용하였다. 그 결과를 요약하면 다음과 같다. 1. 여중생들은 상반신보다 아랫배돌출, 엉덩이, 다리굵기, 체중 등의 하반신을, 그리고 몸통보다는 사지부를 굵게 인식하였으며 굵게 인식하는 신체부위에 대해서 만족하지 못하였다. 2. 여중생들은 착의하기를 희망하는 의복형태를 실제로 착의하였다. 실제로 착용하거나 착용을 희망하는 상의의 의복형태는 피부가 직접적으로 노출되지 않으면서 밀착여부에 관계없는 형태였으며, 하의의 의복형태는 밀착되거나 피부가 노출되지 않는 여유가 많은 긴 슬랙스형태였다. 3. 여중생들은 신체크기를 인식하여 의복형태를 결정하는 정도가 낮았다. 그러나 여중생들은 신체부위의 피부노출이나 밀착에 의한 실루엣 노출이 큰 의복형태를 둘레와 너비를 굵거나 크게 인식할수록 착용하지 알았으며 길이를 길게 인식할 수록 더 착용하였다. 4. 비만집단에 속하는 여중생들은 피부가 직접 노출되거나 밀착되어 실루엣이 노출되는 상의와 하의를 수척집단보다 덜 착용하였다. 그러나 여중생들은 수척/비만 분류와 관계없이 피부와 실루엣을 은폐하는 의복형태는 모두 착용하였다. 그리고 여중생들은 목, 어깨부위를 노출하는 의복을 착용하는 경우 자신이 인지하는 체형보다 객관적인 실체체형을 고려하였으며 반면, 팔의 피부노출과 다리의 밀착에 의한 실루엣 노출은 실제체형보다 자신이 인지하는 체형을 고려하였다.