• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1087-1095
• /
• 1994

Chain drive power transmission system was developed for a low head hydro-turbine which generates power by energy transformation on the turbine blades attached to chains. Also, experimental and theoretical analysis for the sprocket wheel tooth load distribution were performed. The tooth load was measured by the specially designed load sensor. It was found that the tooth load distribution for the steady state operation was in good accordance with the quasi-static state results showing the peak load at the final meshing tooth. The trend of the experimental results agreed with the theoretical results based on the spring model analysis and difference in the magnitude of the maximum tooth load was considered to be the effect of the variable spring constant due to the moving contact point between the roller and sprocket wheel tooth.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1363-1364
• /
• 2013

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.342-343
• /
• 2004

조사재시험시설내 풀 ($3{\times}6{\times}10\textrm{m}^3$) 속에는 풀과 핫셀간에 조사재 및 연료를 핫셀로 이송할 수있는 버켓 엘리베이터(bucket elevator)가 설치되어 있다. 허용하중은 1톤이고, 버켓의 제원은 $25{\times}25{\times}150\textrm{cm}^3$ 이다. 버켓의 상하 운동은 체인구동 시스템으로 약 63도의 경사도를 갖고 움직이며, 체인은 사각 튜브의 내측면에 고정되어 있는 상하 가이드 레일 사이에서 특수 제작된 체인이 로울러 슬라이딩 방식으로 버켓의 lug를 잡고 상하로 움직이며 핫셀 작업대(working table) 하부에 설치되어 있는 스프로켓 휠(sprocket wheel)에 감기어 구동하도록 되어 있다.(중략)

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.132-138
• /
• 2006

A tape feeder is an important part to supply a micro chip such as 1005 and 0603 components in SMT process. Traditional sprocket wheel type feeder has several problems such as backlash and indexing errors, low compatibility and confidence. However, it is very difficult to solve such problems due to the inevitable fraction defectives of sprocket wheel. Thus, the object of this works is to develop a linear type high precision tape feeding system using cam-slider mechanism. The proposed cam-slider mechanism is composed of several links and a plate, pneumatic actuator is used to generate linear motion. The proposed mechanism has distinct advantages over the conventional mechanism. It has reduced feeding errors, long lift-cycle, and slim width. As a result, the developed tape feeder using cam-slider mechanism shows special characteristics far high precision feeding for chip-mounters.