• 한국해양공학회지
• /
• 제23권1호
• /
• pp.60-66
• /
• 2009

This study presents an experimental investigation of the shallow water impact of a box type structure. The analysis was done based on the video images captured by a high speed camera, the flow field obtained by PIV (Particle Image Velocimetry), and pressure measurements in the divided region. The video images showed quite good agreement with the description given by Korobkin. The PIV measurements of the velocity field provided a clear view of the flow pattern for all three stages. The pressure was measured at the bottom of the tank with strain gauge type pressure gauges. The pressure measurements showed the characteristics of divided regions.

• 한국해양공학회지
• /
• 제21권1호
• /
• pp.40-44
• /
• 2007

This paper presents the experimental results on slamming phenomenon. The air pressure cylinder was used to ensure repeatability of the impact. The results showed that the adopted experimental technique was excellent in terms of repeatability, compared to that of the free drop tests. The pressure time histories, magnitude of peak pressure and the behavior of jetspray were obtained. The flat specimen was tested for various incident angles. To estimate the incident speed of the specimen, a high-speed camera was used. The high-speed camera was also a useful tool in understanding the behavior.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.285-289
• /
• 2017

레이저 유도 플라즈마 분광분석법 (Laser-induced breakdown spectroscopy : LIBS) 은 기존의 레이저 기반의 연소 진단 기법들의 약한 신호세기, 복잡한 장비 구성, 낮은 정확도 등의 단점을 보완하는 기법이다. 본 연구에서는 LIBS를 활용하여 스크램 제트 엔진의 연소 가스 온도를 측정하기 위한 기초 연구가 수행되었다. 스크램 제트 엔진에서 사용되는 Jet A-1 연료로 스프레이 화염을 만들고 교정된 열전대로 화염 상부에서의 가스 온도를 측정하였다. 그리고 열전대의 온도 측정위치와 동일한 지점에서의 LIBS 신호를 획득하였다. LIBS 스펙트럼을 분석하여 LIBS 신호와 열전대로 측정된 기준 온도와의 보정곡선을 얻었다. 그래서 본 연구를 통해 LIBS를 활용하여 연소 가스의 온도를 in-situ 하게 측정할 수 있음을 확인하였다.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.54-59
• /
• 2012

This study presents investigation on ullage effect in sloshing experiment. The experiment was done with two dimensional tank. Sloshing experiments were carried out in the tank with 6 different ullage pressures. The tested filling ratio was 30% of the tank height. The flow field was recorded with high speed camera. The sloshing impact pressure were measured at 18 locations. It was shown that the variation of ullage pressures influences the magnitude of pressure and flow field. This study demonstrated the importance of ullage pressure in sloshing test.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.392-395
• /
• 2006

This paper presents the experimental results at slamming phenomenon. The air pressure cylinder was used to ensure repeatability of the impact. The results showed that the adopted experimental technique was very excellent in terms of repeatability when is compared to that of the free drop tests. The pressure time histories, magnitude of peak pressure and the behavior of jet spray were obtained. The flat specimen was tested for various incident angles. To estimate the incident speed of the specimen high speed camera was used. The high speed camera was also useful tool in understanding the behavior.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.67-73
• /
• 2009

This study presents the results of a slamming experiment using a pneumatic cylinder. The employment of the pneumatic cylinder showed a relatively good repeatability when the results were compared with those of other slamming devices. The experiment was done for various incident angles. An air pocket was believed to cause a reduction in the magnitude of the impact pressure with an incident angle of $0^{\circ}$ for the water entry. A high speed camera was used in an attempt to locate the time of the contact between the bottom of the specimen and the free surface. It seemed that the maximum pressure occurred before the water contacted the bottom of the specimen.