• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.2
• /
• pp.87-95
• /
• 2000

Spectral wave models are applied to the area of Kyung-gi bay with two different combinations. One combination assumes a constant tidal elevation over the whole region when applying the wave model to the area. In this case no tidal currents exist in any place. The other combination employs tide model as well as wave model so that tidal condition is defined at every computation time when wave modelling is carried out. Significant wave heights and wave directions are shown for these two cases. With these two different constraints of tidal variation, the results are checked and compared with each other. Both results are found significantly different from each other.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.668-670
• /
• 2010

It is necessary to estimate the range and Doppler shifted spectrum for the extraction of useful information from the return echoes in the frequency modulated continuous wave radar systems used for the remote sending purpose such as detection of moving targets. However, the spectrum estimation using the FFT method causes the very large sidolobes of clutter masking the essential signal information if the acquisition time of an echo signal is pretty short. Therefore, in this paper, the efficient data windowing method is investigated to suppress the strong sidelobe levels of the clutter and results are analyzed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.758-761
• /
• 2009

It is necessary to estimate the Doppler spectrum for each range cell for the extraction of useful information from the return echoes in radar systems used for the remote sending purpose such as detection of moving targets and weather surveillance. The signal amplitude in the given frequency band is the important parameter in the detection and tracking of targets. However, the system performance can be seriously degraded if the efficient removal of the strong clutter is not possible. If the phase noise spreads both the signal and clutter, the clutter removal can be very difficult and the accuracy of frequency estimates is also deteriorated. Therefore, in this paper, the effects of phase noise are analyzed in the estimation of beat frequencies.

• Korean Journal of Optics and Photonics
• /
• v.3 no.4
• /
• pp.239-243
• /
• 1992

We have investigeted the interference phenomena of the second harmonic waves of Nd:YAG laser generated at KDP single crystals and the nitrogen CARS signals. To get the phase difference between the successively generated nonlinear optical signals, a phase shifting unit made of BK-7 glass and a high pressure gas cell are used. Coherence lengths of several samples for the nonlinear signals are measured. Adjusting the thickness of the phase shifting unit where the CARS signals make destructive interference completely, the CARS spectrum of nitrogen suppressed over wide wavelength range is obtained. Also, we have observed the change in degree of suppression of the spectrum for the variation of the thickeness of the phase shifting unit.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.1840-1846
• /
• 2011

It is necessary to estimate the Doppler spectrum for each range cell for the extraction of useful information from the return echoes in radar systems used for the remote sensing purpose such as detection of moving targets and weather surveillance. The signal amplitude in the beat frequency band is the important parameter in the detection and tracking of targets. However, strong clutter echoes do exist in most radar operation environments and the system phase noise spreads both the clutter and signal echoes of the target. In this paper, the effects of this system phase noise are analyzed concerning the clutter and the signal beat spectrum. It is shown that the separation capability of adjacent beat signal depends on the degree of spread in the clutter and beat signal caused by the radar system phase noise

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.507-507
• /
• 2012

컷오프 진단법은 두 개의 탐침 형태로 제작된 마이크로 웨이브 진단법으로, 간단한 수식을 통해 전자밀도, 전자온도 등을 측정할 수 있다. 컷오프 탐침은 방사 안테나, 측정 안테나와 네트워크 분석기로 구성되어 있다. 네트워크 분석기는 두 안테나 사이의 플라즈마 투과 스펙트럼을 만드는데 쓰이며, 스펙트럼 분석을 통해 플라즈마 변수들을 측정할 수 있다. 이 진단법은 장치나 분석방법이 매우 간단한 장점을 지니며, 약 1 mW 정도의 적은 파워를 사용하여 플라즈마 상태를 거의 변화시키지 않는 측정이 가능하다. 또한 CF4와 같은 공정 가스를 이용한 플라즈마에서도 사용이 가능하다. 그러나 컷오프 진단법을 사용한 측정은 다른 종류의 진단법과 마찬가지로, 약 1초 정도의 긴 시간을 필요로 하는 단점이 있어, 펄스 플라즈마나 토카막과 같이 빠르게 변하는 플라즈마를 측정하기에는 무리가 있다. 컷오프 탐침의 시간 분해능을 향상시키고자, 최근에 푸리에 컷오프 탐침(FCP)이 개발되었다. 펄스 형태의 단일신호를 플라즈마를 투과하기 전후로 비교하면 투과 스펙트럼 및 플라즈마 변수들을 얻을 수 있으며, 측정시간을 약 15 ns 정도로 줄일 수 있었다. 이 방법의 신뢰도 및 성능은 이미 CW 플라즈마와 펄스 플라즈마에서 확인되었다. 본 연구에서는 FCP의 초고속 측정의 장점을 이용해서 13.56 MHz의 CCP 및 400 kHz의 CCP에서 RF 위상에 따라 변하는 플라즈마를 측정하였으며, 이에 따라 RF CCP에서의 전자의 동역학 분석을 할 수 있었다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.2
• /
• pp.83-93
• /
• 2004

In this study. the Modified Response Displacement Method(MRDM) for seismic design of underground box-type structures is proposed. Firstly, to investigate the applicability of the conventional RDM, various parametric studies are performed according to buried depth and soil conditions. Results from the conventional RDM are compared with those of time history analysis in terms of the maximum bending moment and relative displacement. The comparison shows that the velocity response spectrum and the determination method of foundation modulus which significantly influence the accuracy of RDM should be modified. Thus, the modified velocity response spectrum and the new determination method of foundation modulus are proposed under consideration of domestic conditions. In order to demonstrate the accuracy and validity of the proposed MRDM numerical analyses are performed according to different parameters such as depth of base rock, height and width of box, buried depth and soil condition. the comparison with the results of the time history analysis verifies the feasibility of the proposed MRDM for the seismic analysis.

• Geophysics and Geophysical Exploration
• /
• v.26 no.4
• /
• pp.199-210
• /
• 2023

The physical properties of rocks in reservoirs change after CO₂ injection, we modeled a reservoir with a transition zone within which the physical properties change linearly. The function of the Wolf reflection coefficient consists of the velocity ratio of the upper and lower layers, the frequency, and the thickness of the transition zone. This function can be used to estimate the thickness of a reservoir or seafloor transition zone. In this study, we propose a method for predicting the thickness of the transition zone using deep learning. To apply deep learning, we modeled the thickness-dependent Wolf reflection coefficient on an artificial transition zone formation model consisting of sandstone reservoir and shale cap rock and generated time-frequency spectral images using the continuous wavelet transform. Although thickness estimation performed by comparing spectral images according to different thicknesses and a spectral image from a trace of the seismic stack did not always provide accurate thicknesses, it can be applied to field data by obtaining training data in various environments and thus improving its accuracy.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.255-264
• /
• 2007

In the current domestic and overseas standards concerning seismic design, especially on the capacity & demand spectra in the multi-story building, failure is caused more by story drift than by displacement; and the existing capacity spectrum method (CSM) does not make a close estimate of story drift because response is derived using displacement. Therefore, this paper proposes an improved CSM to estimate story drift and its direct effect on the collapse of structures, yet still maintaining the same advantage and convenience of the existing CSM about a most basic model of multi-story building: shear building. To establish its reliability, the proposed method is applied to an example model and results are then compared with those obtained through nonlinear time-history analysis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.197.2-197.2
• /
• 2014

그래핀(graphene)의 라만 스펙트럼은 전하밀도(charge density)와 기계적 변형(strain)에 민감하여 연구에 널리 활용되고 있다. 본 연구에서는 기계적 박리법으로 만든 그래핀에 황산 수용액으로 p-형 화학도핑(chemical doping)을 유발시키고 전하밀도의 변이에 따른 라만 스펙트럼의 변화를 조사하였다. 이러한 변화를 통해 황산과 물 분자의 계면 확산을 이해하고, $SiO_2/Si$ 기판의 화학적 특성이 미치는 영향을 파악하고자 하였다. 분자의 효율적인 계면 확산을 위해 고온 산화반응을 이용하여 그래핀의 기저면에 나노공(nanopore)을 만든 후, 액상에서 라만 스펙트럼을 측정하였다. 증류수 속에 담궜을 때 물 분자가 그래핀-기판 계면 사이로 확산되면서 열처리에 의해 유발된 정공이 사라짐을 확인하고, D-봉우리의 가역적인 변화로부터 그래핀의 구조적 변화를 유추하였다. 황산 농도를 증가시켰을 때 G와 2D-봉우리의 진동수가 상호간에 일정한 비율로 증가하여 정공의 밀도가 증가함 알 수 있었다. 동일한 시료에 대해 황산의 농도를 감소시킴으로써 p-형 도핑을 제거하고 동일한 반응을 가역적으로 반복할 수 있었다. 상기한 분자의 2차원 확산 현상은 나노공의 유무와 기판의 전처리 조건에 따라 크게 달라진다는 사실을 확인 할 수 있었다. 또한 여러 파장에서 측정된 전하밀도와 기계적 변형에 의한 G와 2D-봉우리의 진동수 변화로부터 다른 연구자들이 활용할 수 있는 검정곡선을 제시하였다.