• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.158-163
• /
• 1994

본 논문에서는 진동테이블의 가속도스펙트럼에 대한 치구 위의 제어점 및 시험물부착점들에서의 가속도스펙트럼을 실제 진동시험조건에서 낮은 진동레벨로 측정한 후, 측정된 전달함수를 이용하여 기준스펙트럼과 시험물 부착점들에서의 스펙트럼의 창를 최소화하기 위한 진동테이블(armature table)에서의 가속도스펙트럼 및 제어점에서의 기준스펙트럼을 최소자승법(Least Square Method)의 원리를 적용하여 구하는 방법을 제안하였다. 본 방법은 시험규격에서 정해진 기준스펙트럼으로 제어할 경우와 제안된 기준스펙트럼으로 제어할 경우, 시험물부착점들로 전달되는 스펙트럼을 컴퓨터 시뮬레이션을 통해 간단히 예측할 수 있으므로 제안 전.후 결과를 쉽게 비교, 확인할 수 있고 실험을 통해 이를 증명하므로서 본 논문에서 제안된 방법의 유용성을 확인할 수 있었다. 이와 같이 제안된 기준스펙트럼을 랜덤진동제어의 기준스펙트럼으로 사용하므로서 시험규격에 정해진 기준스펙트럼을 가능한 정확히 시험물에 전달할 수 있고, 시험물부착점들에서의 과대시험 또는 과소시험을 최대한 줄이므로서 보다 정확한 진동시험을 수행할 수가 있다.

• Land and Housing Review
• /
• v.5 no.2
• /
• pp.115-120
• /
• 2014

Site coefficient and amplification factor of current domestic Seismic Design Code (KBC-2009) have no consideration for the domestic ground condition in which the base rock is normally placed within 30m form the surface. Accordingly, in this study dynamic centrifugal test and analysis for pile foundation into clay were achieved. and the response spectrums of free surface and basement were compared with each other. Within the period 1sec., the measured spectral acceleration of free surface and basement was bigger than the design spectral acceleration of SC and SD site. However the measured spectral acceleration of free surface and basement for the period over 1.5sec. was smaller than the design spectral acceleration of SC site. There was no severe difference of spectral acceleration according to the upper structure, embedded depth of foundation and free surface conditions. Consequently, normal domestic apartment housing for the period range over 1.5sec. could be design more economically applying these test result.

• Land and Housing Review
• /
• v.5 no.1
• /
• pp.35-40
• /
• 2014

Site coefficient and amplification factor of current domestic Seismic Design Code (KBC-2009) have no consideration for the domestic ground condition in which the base rock is normally placed within 30m form the surface. Accordingly, in this study dynamic centrifugal test and analysis for pile foundation into sand and upper structure were achieved. and the response spectrums of free surface and basement were compared with each other. Within the period 1 sec., the measured spectral acceleration of free surface and basement was bigger than the design spectral acceleration of SC and SD site. However the measured spectral acceleration of free surface and basement for the period over 1.5 sec. was smaller than the design spectral acceleration of SC site. There was no severe difference of spectral acceleration according to the upper structure, embedded depth of foundation and free surface conditions. Consequently, normal domestic apartment housing for the period range over 1.5sec. could be design more economically applying these test result.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.3
• /
• pp.33-42
• /
• 2004

While transforming the inelastic system into the equivalent elastic one gives an advantage of simpler analysis, the actual inelastic behavior of the system is hardly modeled in the capacity spectrum method (CSM). Therefore, the accuracy of CSM depends on the precise estimation of equivalent period and damping ratio as well as the modification of the elastic response spectrum and the corresponding demand spectrum. In this paper, the effect of demand spectrums on the accuracy of CSM is evaluated. First, the response reduction factors provided in ATC-40 and Euro Code are evaluated. Numerical analysis results indicated that the acceleration responses obtained using the factor of Euro Code are closer to the actual response than those obtained using the factors of ATC-40. Next, the accuracy of CSM is evaluated constructing the demand spectrum using the absolute acceleration responses and pseudo acceleration responses. The results obtained using the absolute acceleration responses were found to be generally larger than those obtained using the pseudo ones. Since CSM often underestimates the response, the use of absolute acceleration response gives the response relatively closer to the exact ones. However, the difference becomes negligible as the hardening ratio and the yield strength ratio become larger.

• Land and Housing Review
• /
• v.6 no.3
• /
• pp.147-152
• /
• 2015

Site coefficient and amplification factor of current domestic Seismic Design Code based on American Seismic Code, have no consideration for the domestic ground condition in which the base rock is normally placed within 30m form the surface. By previous studies, the measured spectral acceleration of the result of dynamic centrifugal test and analysis was smaller than the design spectral acceleration for the period over 1.5 sec. Accordingly, in this study structural analysis and design using dynamic centrifugal test result for pile foundation were achieved, and the quantity of concrete and reinforcement of wall frame was compared with each other. Comparison results of cost using KBC the design spectral acceleration of SC, SD site and SDS, the quantity of reinforcement using SDS for SD site was 17~23% smaller than using the design code SD site.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.25-25
• /
• 1998

진동시험기를 사용한 충격시험은 자유 낙하식 충격시험기를 이용하는 것 보다 여러 가지 장점이 있으며, 충격반응 스펙트럼 시험의 요구가 점점 증가하고 있다. 진동시험기를 이용하여 충격반응 스펙트럼 시험을 실시하는데 진동시험기에서 허용하는 최대 힘, 속도, 변위에 의하여 제약을 받게 된다. 충격반응 스펙트럼을 만족하는 충격파형은 무수히 많으나 최대 가속도, 속도, 변위 등이 작으면 작을수록 그 충격파형의 품질이 우수하다고 말할 수 있다. 충격 지속시간이 짧고 충격가속도의 최대치가 큰 충격파형을 인가할 수 없지만, 충격 지속시간이 보다 길고 충격가속도의 최대치가 작은 파형이 동일한 충격반응 스펙트럼 규격을 만족할 수 있다. 진동시험기를 사용하여 충격반응 스펙트럼 시험을 수행하기 위한 충격파형이 웨이브레트를 이용하여 시험규격의 충격반응 스펙트럼을 만족하도록 합성된다. 웨이브레트의 매개변수는 주파수, 반파의 개수, 지연시간, 극성이다. 각 웨이브레트의 진폭은 시험규격의 충격반응 스펙트럼을 만족하도록·반복적으로 조절된다. 이렇게 합성된 충격파형은 진동시험기를 사용한 충격반응 스펙트럼 시험의 참조 가속도 파형으로 간주된다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.1
• /
• pp.21-28
• /
• 1999

The objective of the study is to develop attenuation equations of the ground motions in the southern part of the Korean peninsula. The earthquake source characteristics and the medium properties were estimated from available instrumental earthquake records and used as input parameters. The peak ground accelerations(PGA) and pseudo-velocity response spectra(PSV) were simulated by the random vibration theory. The attenuation equations for the PGA and PSV were constructed in terms of local magnitudes and hypocentral distances.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.3
• /
• pp.289-297
• /
• 2011

The explicit finite element method is an essential tool for solving large problems with severe nonlinear characteristics, but its results can be difficult to interpret. In particular, it can be impossible to evaluate its acceleration responses because of severe discontinuity, extreme noise or aliasing. We suggest a new post-processing method for transient responses and their response spectra. We propose smoothing methods using a Gaussian kernel without in depth knowledge of the complex frequency characteristics; such methods are successfully used in the filtering of digital signals. This smoothing can be done by measuring the velocity results and monitoring the response spectra. Gaussian kernel smoothing gives a better smoothness and representation of the peak values than other approaches do. The floor response spectra can be derived using smoothed accelerations for the design.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.6
• /
• pp.17-34
• /
• 2020

In response spectrum analysis of pile-supported structure, an amplified seismic wave should be used as the input ground acceleration through the site-response analysis. However, each design standard uses different input ground acceleration criteria, which leads to confusion in determining the appropriate input ground acceleration. In this study, the ground accelerations were calculated through dynamic centrifuge model test, and the response spectrum analysis was performed using the calculated ground acceleration. Then, the moments derived from the test and analysis were compared, and a method for determining the appropriate input ground acceleration in response spectrum analysis was presented. Comparison of the experimental and simulated results reveals that modeling of the ground using elastic springs allows proper simulation of the natural period of the structure, and the use of a seismic wave that is amplified at the ground surface as the input ground acceleration provided the most accurate results for the response analysis of pile-supported structures in sands.

• Geotechnical Engineering
• /
• v.1 no.1
• /
• pp.13-20
• /
• 1985

In this paper, earthquake response of the Bangkok area in Thailand was analyzed in terms of the acceleration response spectrum and maximum acceleration of the computed surface motions. The program SHAKE was employed to analyse the ground motion. With increasing the maximum acceleration and predominant period of given base rock motion, the computed maximum ground surface acceleration increases. but converges on a maximum value of about 0.39. The characteristics of earthquake response spectrum in the Bangkok area are also discussed and illustrated.