• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.6
• /
• pp.576-580
• /
• 2022

Semiconductor devices have evolved from 2D planar FETs to 3D bulk FinFETs, with aggressive device scaling. Bulk FinFETs make it possible to suppress short-channel effects. In addition, the use of low-k dielectric materials as a vacuum gate spacer have been suggested to improve the AC characteristics of the bulk FinFET. However, although the vacuum gate spacer is effective, correlation between the vacuum gate spacer and the short-channel-effects have not yet been compared or discussed. Using a 3D TCAD simulator, this paper demonstrates how to optimize bulk FinFETs including a vacuum gate spacer and to suppress short-channel effects.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.56-62
• /
• 2024

By introducing curing kinetics and chemo-rheology for the epoxy resin formulation for ultra-high voltage gas insulated switchgear (GIS) Insulating Spacers, a study was conducted to simulate the curing behavior, flow and warpage analysis for optimization of the molding process in automatic pressure gelation. The curing rate equation and chemo-rheology equation were set as fixed values for various factors and other physical property values, and the APG molding process conditions were entered into the Moldflow software to perform optimization numerical simulations of the three-phase insulating spacer. Changes in curing shrinkage according to pack pressure were observed under the optimized process conditions. As a result, it was confirmed that the residence time in the solid state was shortened due to the lowest curing reaction when the curing holding pressure was 3 bar, and the occurrence of deformation due to internal residual stress was minimized.

• Polymer(Korea)
• /
• v.32 no.2
• /
• pp.169-177
• /
• 2008

The thermal and optical properties of cellulose tri(cholesteryloxy) carbonate(CCE0) and cellulose tri(cholesteryloxycarbonyl)alkanoates (CCEn, n=$2{\sim}8$, 10, the number of methylene units in the spacer) were investigated. CCE0 formed an enantiotropic cholesteric phase, whereas all the CCEn exhibited monotropic cholesteric phases. CCEn with n=$3{\sim}8$ formed cholesteric phases with left-handed helical structures whose optical pitches (${\lambda}_m's$) decrease with increasing temperature. On the other hand, CCE0 and CCEn with n=2 or 10 did not display reflection colors over the full cholesteric range, suggesting that the helical twisting power of the cholesteryl group highly depends on the length of the spacer connecting the cholesteryl group to the main chain. The thermal stability and degree of order in the mesophase and the temperature dependence of the ${\lambda}_m$ observed for CCEn highly depended on n. The results were discussed in terms of the differences in the internal plasticization, the arrangement of the side groups, and the conformation of the molecules.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.3
• /
• pp.383-389
• /
• 2016

Kissing of sub-conductors due to magnetic forces has been investigated in a 154 kV bundled overhead transmission line. With increasing ampacity of the conductors and enlarging the distance between spacers, lager magnetic force was measured. When the phase ampacity was 2,000 amps and the distance between two adjacent spacers was 68 m, for instance, the conductors became unstable and vibrated with a frequency of several herts. Furthermore, when the ampacity was 2,250 amps and the distance between spacers was 136 m, the two sub-conductors were contacted. Analysing the magnetic forces with distance of spacers, the safe distance of spacers to avoid contact of sub-conductors was presented. The change of the safe distance is discussed due to various parameters, such as residual stresses and wind pressures, in the real transmission lines.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.1
• /
• pp.24-28
• /
• 2009

본 논문에서는 청색 인광 발광 물질인 bis(3,5-Difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl) iridium (III) (Flrpic)과 녹색 인광 발광 물질인 fac-tris(2-phenypyridine) irdium(III) ($Ir(ppy)_3$)와 적색 인광 발광 물질인 his(5-benzoyl-2-phenylpyridinato-C,N)iridium(III) (acetylacetonate) ($(Bzppy)_{2}Ir(acac)$)를 각각 적층하여 백색 유기 발광 다이오드를 제작하였고, 각각의 발광층 사이에 혼합된 스페이서인 4,4'-N,N'-dicarbazole-biphenyl (CBP):4,7-diphenyl-1,10-phenanthroline (BPhen)을 적층하여 그 때의 영향에 대하여 연구하였다. 최적화된 구조에서의 전력 효율은 $0.014\;mA/cm^2$에서의 19.7 lm/w를 나타내었으며, $0.127\;mA/cm^2$에서의 11.5%의 외부 양자 효율을 나타내었고, 8 V에서 Commission Internationale do I'Eclairage ($CIE_{x,y}$) coordinates (x=0.36, y=0.44)의 색좌표를 나타내었다.

• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2007

Fully or nearly fully 6- [4- (4'- (nitrophenylazo)phenoxycarbonyl)]pentanoated polysaccharide derivatives were synthesized by reacting cellulose, amylose, chitosan, chitin, alginic acid, pullulan or amylopectin with 6- [4- (4'- (nitrophenylazo)phenoxy) ] pentanoyl chloride (NA6C) and their thermotropic liquid crystalline behaviors were investigated. Like in the case of NA6C, all the polysaccharide derivatives formed monotropic nematic phases, suggesting that the mesophase structure of the polysaccharide derivatives is dertermined by the mesogenic side groups and not by the polysaccharide backbone. This is the first report of polysaccharide derivatives, except cellulose derivative, that form thermotropic nematic phases. The thermal stability and degree of order of the nematic phases observed for poly saccharide derivatives were significantly different from those reported for the polymers in which the azobenzene groups are attached to flexible or rigid backbones through flexible spacers. The results were discussed in terms of the difference in the arrangement of the main and side chains and the flexibility of the main chain.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.780-789
• /
• 2008

A new method for measuring the performance of a micro-thruster is suggested in this paper. A few thrust stands have been developed for measuring micro-level thrusts. This paper describes a different measurement method that can minimize the calibration involved in the measurements, while providing the capability of directly measuring the produced minimum impulse bit directly. The underlying theory and the theoretical background for the measurement mechanism are described here. The theory and method is verified using a computer simulation, and the result is given in this paper. The theory has also been tested on an actual hardware. Although this hardware is a prototype, developed for proof-of-concept analysis, satisfactory results have been obtained.

• Journal of the Korea Computer Industry Society
• /
• v.7 no.4
• /
• pp.447-454
• /
• 2006

Imbecility, Parkinson's disease, the brain disease occurrence rate such as motor nerve disease are increasing rapidly since 1980 years, according to the Britain, the United States of America, Japan, Germany, result that investigate the spanish occurrence rate, was expose that imbecility mortality including Alzheimer's disease increased more than man case 3 triple and man and woman of brain disease mortality increases by about 50% with Parkinson's disease and motor nerve disease. <중략> first of all, courtesy call is important. So that can find out danger benevolence and occurrence danger at early stage, person arranged brain vein because examination does special Quality examination and modelling Tuesday embodying possible Cerebrovascular Ultrasonogram (brain vein supersonic waves) and prove excellency of performance from time to time. Is going to apply to brain disease patient of other disease if supplement system hereafter, and this research tried to study special quality that standardization is not producing poetic theme width directly and approach.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.11
• /
• pp.1373-1379
• /
• 1988

This paper describes a two-dimensional analysis of the potential distribution and electron concentration of the MODFET at channel using FDM. More exact analysis can be obtained by two-dimensional analysis which considers parasitic effects ignored in one-dimensional analysis. Using Poisson and Shrodinger equations, the potential distribution and the wave function are calculated within a constant error bound. As a result, the relations between the thickness of spacer, doping concentration of (n) AlGaAs layer, and the sheet density of the 2DEG (2 Dimensional Electron Gas) of MODFET at channel are suggested quantitively. The sheet density of the 2DEG is increased as the thickness of the spacer is decreased of the doping concentration of the (n)AlGaAs layer is lowered.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.1
• /
• pp.130-147
• /
• 2008

Spanish missionaries started to grow vine grapes and make wines in California 230 years ago. Earlier pioneers of the land started to do the same works for commercial purposes 130 years ago. Now California became one of the most important wine making places of the world. The quality of California wines in fact have been acknowledged as the best in the world by being ranked on the top in international wine tasting competition, such as Paris Tasting. A large wine cluster, consisted of grape growing, wine making, wine tours, and research and education, has been created in the area centered by Napa and Sonoma, California. In this context, this paper examines the process of formulating the cluster, factors contributing the success, articulates core actors, and draws policy and theoretical implications. It concludes that innovative actors, such as winery founders, local universities, and business organizations, have played key roles in establishing the California wine cluster.