• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.5
• /
• pp.384-394
• /
• 1996

The propagation properties of square and Gaussian pulse signals on the microstrip line are investigated by using proper conventional models to meet the frequency range of a pulse, accuracy, and geometrical requirements of the microstrip line. Numerical integration technique which has its accuracy and is easily simulated, is used to obtain the time domain response of pulse signals. The dispersion of pulse signals is analyzed regarding to the relative permittivity $\varepsilon_r$, substrate height h, strip width w of the microstrip line and pulse width $\tau$ of signal pulse. The simulation results show that small relative permittivity and small rationale of w/h are advantageous for the dispersion of the pulse signals, and that pulse signals with small bandwidth cause smaller dispersion. The results of this paper are compatible to the trade-off determination of relative permittivity, substrate height, strip width and pulse width of signal pulse when a design of MIC and MMIC is necessary.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.8 s.338
• /
• pp.41-46
• /
• 2005

Microstrip open-end and linear resonator are analyzed by method of moment (MoM) taking the entire-domain current distribution, found in literature, along the transverse direction of microstrip line. A transverse correlation function which incorporates permittivity, thickness and width of the line is derived. Numerical examples are investigated and compared with the available other data and methods in order to give the validity of the proposed method. It is found that the proposed method can generate more accurate results than the conventional methods.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.2
• /
• pp.1-6
• /
• 2003

A theoretical method for the TE polarized electromagnetic scattering on a periodic strip grating over a grounded dielectric slab is considered. The numerical results for an analysis of the plane wave scattering from the structure are presented such as normalized mode amplitude and relative reflected power against normalized dielectric slab height, relative reflected power against angle of incidence and distribution of strip current density. Detailed discussions on the Bragg blazing phenomena observed in the geometry are give.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.979-983
• /
• 2007

In this thesis, a strip layout drawing of LCD S/C (shield case) was prepared. In the press die, strip layout drawing is a major factor that decides the mass production of a product. The 3D CAD/CAM system was applied for the easy correction of the interference factor with other parts to be mounted. The material use ratio was enhanced to 60.17% by optimizing the blank layout and strip layout in double width array. Furthermore, the flatness of the product was made to fit the requirements by adding the bidding process intensively on the notching part where the occurrence of the change in shape is expected owing to the thin material. For the 3D CAD/CAM software, Unigraphics NX3.0 was used. The strip layout drawing was prepared in 12 processes.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.377-380
• /
• 2000

본 논문에서는 개구 결합 방식의 마이크로스트립 안테나에 U 슬롯과 turning stub를 동시에 사용하여 넓은 대역폭을 갖는 안테나를 설계 및 제작하였다. 상대 유전율이 2.2이고 두께가 61mil인 duroid 5880기판을 사용하여 ITS(Intelligent Transport System)대역인 5.77GHz에서 동작하는 안테나를 설계하였고, VSWR$\leq$2를 기준으로 하여 약 12.4%의 대역폭을 얻을 수 있었다. 그리고 약 7GHz에서 동작하는 안테나에서는 상대 유전율이 2.2이고 두께가 31mil인 5880기판과 1.6mm인 form을 사용하여 VSWR$\leq$1.5를 기준으로 약 11.7%의 대역폭을 얻을 수 있었다. 각각의 경우 U 슬롯만을 사용한 경우와 비교할 때 5.77 GHz에서는 5.7% 7GHz대역에서는 약 4%의 대역폭 개선 효과를 확인할 수 있었다.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1998.10a
• /
• pp.849-853
• /
• 1998

라인 해석법(Method of Line), MOL과 파수 영역 해석법(Space Domain Approach), SDA를 결합한 공간-파수 영역 해석법(SSDA)를 이용하여 MIC/MMIC 회로에서 임의 입체 구조를 갖는 공진기를 해석한다. SSDA는 상대 수렴(relative convergence)특성을 갖지 않으며, 반 해석적 (semianalytical )특성으로 수치적 효율이 높다. 경계치 문제로부터 씨스팀 행렬방정식 형태로 유도된그린 함수에 갤러킨법을 적용한다. 삼각, 사각 및 불연속 구조를 갖는 스트립 패치의 폭, 위치와 기판의 두께 변화에 따른 공진 주파수를 계산하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.16-19
• /
• 2001

접지된 유전체위에 스트립 격자에 대해 파가 비스비스듬하게 도파할 경우에 비교적 평탄한 Helix 구조로 볼수 있으며 이때 누설파 안테나 관점에서 복소전파상수와 복사패턴을 구하는 방법을 제시하였다. 그리고 유전체 두께가 매우 얇은 경우와 비교적 두꺼운 경우에 대하여 유전체 내부에서 파가 스트립 격자를 가로 질러 도파하거나 비스듬하게 도파하는 경우에 복소전 파상수와 복사패턴을 수치 계산하여 비교 고찰하였다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.675-678
• /
• 2004

Cabral과 Leedom이 처음 제시한 LIC(Line Integral Convolution)은 기존의 DDA 알고리즘에 기반한 회선 처리방식보다 우수한 것으로 인정받았고 과학적 시각화 분야에 많은 공헌을 하였다. 그리하여 이것을 기반으로 하는 많은 논문들이 나왔다. 우리는 본 논문에서 기존 LIC의 선 중심의 스트림 라인이 아니라 openGL의 기하 프리미티브인 쿼드 스트립을 이용한 어느 정도의 두께를 가진 스트림 라인을 생성하여 보다 새롭고 다양한 흐름의 시각화 기술을 제시하고자 한다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.2-11
• /
• 2001

The L-shaped strip is shown to be an attractive feed for the thick mierostrip antenna (thickness around 10% of the operating wavelength). The L-strip incorporated with the radiating patch introduces a capacitance suppressing some of the inductance introduced by the strip itself. In this paper, a wideband microstrip patch antenna fed by L-strip for the PCS ($1,750{\sim}1,850MHz$) and IMT-2000 ($1,920{\sim}2,170MHz$) broad-band is presented. A two-element array fed by L-strip is also proposed. Both the antennas have stable radiation patterns across the passband. The impedance bandwidth is over 31% (VSWR < 1.5, 615 MHz) of the center frequency. Moreover, both the antennas have about 7 dBi average gain.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.827-836
• /
• 2001

The L-shaped strip is shown to be an attractive feed for the thick microstrip antenna (thickness around 10% of the operating wavelength). The L-strip incorporated with the radiating patch introduces a capacitance suppressing some of the inductance introduced by the strip itself. In this paper, a wideband microstrip patch antenna fed by L-strip for the PCS (1,750~1,850 MHz) and IMT-2000 (1,920~2,170 MHz) broad-band is presented. A two-element array fed by L-strip is also proposed. Both the antennas have stable radiation patterns across the passband. The impedance bandwidth is over 31% (VSWR < 1.5, 615 MHz) of the center frequency. Moreover, both the antennas have about 7 dBi average gain.