• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.246-249
• /
• 2003

본 논문에서는 TCP/IP 기반에서 웨이블릿 변환과 인터넷을 이용 원거리에 있는 Device를 PDA로 제어하는 영상감시 솔루션에 대해 연구하였다. 우선 서버는 카메라를 이용하여 영상을 획득하고 획득한 영상에 대해 2단계 웨이블릿 변환을 한 후, 인터넷을 통해 Client(PDA)로 전송한다. PDA는 수신한 프레임만을 가지고 역 웨이블릿 변환을 하고 사용자에게 영상을 보여주게 된다. 카메라는 스텝 모터와 마이크로프로세서 80C196KC에 의해서 컨트롤되고, 사용자는 서버에서 보내는 영상을 PDA를 이용해서 감시한다. 그리고 PDA를 이용 원거리에 있는 서버 80C196KC에 제어 신호를 보내고 자신이 원하는 영상을 감시할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.566-569
• /
• 1987

The primary difficulties encountered in the use of step motors are underdamped response when stopping at a specified position and dynamic instability during high-speed slewing. This paper proposes a speed and position detection scheme using the back EMF generated by the rotating permanent magnet field of a two-phase 1.8.deg. hybrid step motor, and presents its application to the state-variable feedback control of the hybrid step motor. All simulation results in a single step response show that the hybrid step motor performances such as peak overshoot and settling time are greatly improved.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.311-315
• /
• 2006

This paper proposes 5 phase step motor drive system has high performance dynamics with micro step control has current controller. In this paper, analog current controller has been developed to minimize system size and cost. The validity of the proposed technique is verified through experimental results of position control robot.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.136-138
• /
• 2008

본 논문에서는 전기자전거에 응용할 수 있는 BLDC 전동기의 구동제어시스템을 설계하였으며, 시뮬링크를 이용한 시뮬레이션을 통해 BLDC 전동기와 그 구동제어시스템의 특성파악을 수행 하였다, 모터 컨트롤 전용 16비트 마이크로컨트롤러인 dsPIC30F3010을 탑제하여 시스템을 설계하였으며, 2상 여자 제어법을 적용하여 6-스텝 인버터를 구동하고, PID 연산을 수행, 속도제어 방법을 통하여 전기자전거에 사용할 수 있는 BLDC 전동기의 구동제어시스템을 구현 하였다.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.45-48
• /
• 1987

In applications of step-motor, the requirements of small-size and strong-power gave birth to feed-back drive to the maximum efficiency and complete damping. In this paper, a new scheme that determines switching times from sensed values of position and speed is presented for simple bang-bang type drive circuit. The optimal values of each phase switching times are obtained using conjugate gradient method.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.331-333
• /
• 1998

This paper deals with the analysis of the magnetic circuit of a claw pole type step motor. The air gap flux equation is derived using Thevenin equivalent circuit. On the base of the magnetic circuit analysis, both static torque and the dynamic torque characteristics are presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.220-226
• /
• 2000

High precision step motor using Terfenol-D linear actuators is proposed and its performance is tested. Four Terfenol-D linear actuators are set up perpendicular to the rotor and saw-tooth current signals are applied on the actuators. It was found that the rotation angle is increased as the excitation current, the inertia of the rotor, and the contact force between the rotor and the push device are increased. The rotation angle per step of $0.001^{\circ}$ and blocking torque of 0.2Nm are achieved. The effect of the time delay between the excitation signals is also investigated.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.733-735
• /
• 2017

자연재해나 전쟁 등으로 인한 긴급 구호 상황에서의 환자에 대한 응급처치는 중요하다. 그러나 자연재해나 전쟁으로 인해 지면이 불균형해지면 응급 처치를 하기가 불편해진다. Absolute Table은 테이블, 자이로 센서, 가속도 센서, 초음파 센서, 스텝 모터, 모터 드라이버, 스크류와 너트, 각종 스위치들로 구성되어있다. Absolute Table의 전원을 키면 실시간으로 수평을 맞추고 유지해 평평한 작업대를 형성한다. 어떤 형태든 적용이 가능해 실시간 수평 유지 기술이 필요한 다양한 분야와 접목시킬 수 있을 것으로 예상된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.415-420
• /
• 2006

This paper introduces a new self-bearing motor which combines a homopolar step motor and a passive magnetic bearing. Compared with conventional self-bearing motors which are mostly based on the theory of active magnetic bearings and therefore have some difficulties in design of the complicated flux distribution and control of the levitation force and the torque independently, the proposed self-bearing motor has a very simple and novel structure and operating principle. for the levitation, it works just like passive magnetic bearings which use the repulsive force between permanent magnets. On the other hand, its rotation principle is quite similar to that of a conventional homopolar step motor. In this paper, we introduce the basic structure and the operating principle in detail, and show some results of FEM analysis to predict the performance of the proposed self-bearing motor and further, to get the optimal design parameters.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.83-90
• /
• 2011

The technique of localization is the core technology for information exchange or environment monitering to measure the position of an object or person. Today, the techniques of localization have been studied extensively and it can be applied to logistics, medical, robotics, etc. But, a lot of money to apply technique of localization is needed. Hence in this paper, we proposed AoA localization system based on Zigbee at low cost. The System measured the RSSI value by rotating the directional antenna using a step motor and Zigbee module. When the measured RSSI is the largest, the receiver measures the angles from beacons which are located at the corners with the rotating angle of a stepping motor and the position of the receiver will be calculated by appling AoA localization method. The measured results show an error about 35~36 cm.