• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.595-601
• /
• 2014

The microstructures of NATM were examined by SEM, FT-IR spectra, tensile properties, mole % of [NCO/OH], and particle size analyzer. Growing concerns in the environment-friendly industries have led to the development of solvent-free formulations that can be cured. We had synthesized NATM(New Austria Tunnel Method) resin having the ability to protect stainless steel against corrosion. Comparing with general NATM resin and coatings, this resin that synthesized with polyurethane and epoxy was highly stronger in intensity and longer durability. Hybrid resin was composed of polyols, MDI, epoxy, silicone surfactant, catalyst and crosslink agent, and fillers. Moreover, fillers such as fume silica not only accelerated the curing rate but also improved the physical property as thermal barriers. The rigid segments of synthetic resin in mechanical properties were due to fume silica and the increase the mole% of [NCO/OH] for corrosion protection. In conclusion, the hybrid resin microstructure with crosslink agent and fume silica are good material for thermosetting coating of metal substrates such as stainless steel.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.311-316
• /
• 2002

The following results are achieved from a mortar flow test depending on stainless steel slag fineness, rate of replacement, and a research on material age compressive strength, strength activity index. 1. Flow is proportional to the stainless steel slag fineness. 2. Mixing stainless steel slag decreases compressive strength 3. Material age compressive strength has the maximum value when stainless steel slag fineness is 6000$cm^2$/g. 4. Material age 7day strength activity index satisfies KSCE 95-01 at all conditions except the case of fineness 8000$cm^2$/gㆍstainless steel slag rate of replacement 30%. 5. Material age 28day strength activity index satisfies KSCE 95-01 in case of stainless steel slag fineness 4000$cm^2$/gㆍrate of replacement 10%, fineness 6000$cm^2$/gㆍ10%, or 20%.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.879-884
• /
• 2002

The objective of this study is to investigate the seismic capacity of the non-seismically detailed RC bridge piers before and after applying a seismic retrofitting method using stainless steel wire mesh. Total nine circular section RC piers were constructed. Different lap splice longitudinal reinforcement details were adapted for four specimens and various types of stainless steel wire mesh were applied for the remaining five specimens. Harmonic cyclic lateral load was applied on each specimen under a constant axial load. The test results indicated that the existing circular piers have low seismic capacity while the stainless steel wire mesh retrofitting method improves the seismic capacity considerably. In addition, test results revealed that the circular section piers could have a considerable amount of ductility if longitudinal bars are not lap-spliced in potential plastic hinge zone. Based on this experimental study it could be concluded that the seismic performance, that is ductility and energy absorption capacity, of the non-seismically detailed RC bridge piers would be increased by applying the stainless steel wire mesh seismic retrofitting method.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.11a
• /
• pp.59-69
• /
• 1998

ABS sensor ring has been manufactured by P/M method using 400 series ferrite stainless steel. the results are as following : It is supposedly sufficient to use for control computer due to good experimental results of magnetic characteristics. Compared with sensor ring made by iron, 400 series ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. Thus the decreasing production process has been obtained. As a result of hardness and tensile test, 400 series ferrite stainless steel shown a good endurance when it is combined to C/V joint, and has a good hardness properties endurable In sand and pebble impact.

• Journal of the Korean Ceramic Society
• /
• v.33 no.3
• /
• pp.251-258
• /
• 1996

The reactions between an active metal brazing alloy and interlayers together with the effects of interlayer type on the interfacial microstructure change were investiaged for silicon nitride/stainless steel joint. The bending strengths were measured for joints with Mo, Cu, Ni interlayer type of different thicknesses. It was found that the interlayer with a low yield strength value is effective to improve the bending strength of the Si3N4/stainless steel joint. The maximum joint strength obtained at room temperature for a laminated Cu/Mo interlayer was about 460 MPa. The combined use of Mo and thin Cu layer was found to be effective in enhancing the bending strength for the Si3N4/S.S.316 joint.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.463-465
• /
• 2003

전기분해에 의한 부상현상을 이용하여 유류로 오염된 토양 세정 후 발생되는 유출수 중 유분 등을 분리하기 위한 적정 운전조건을 찾고자 하였다. 전기분해 반응조(200 $\times$ 10 $\times$15cm)에 혼합 계면활성제 (POE5 : POE14, 1:1) 1% 용액에 디젤을 1,000mg/L 농도로 용해시켜 실험하였다. 양극에는 티나늄 코팅전극, 음극으로는 스테인레스 스틸전극을 이용하였다. 반응시간은 62분( 반응: 60분, 부상시간: 2분) 이었으며 전압은 6V였다. 전해질 첨가에 의한 영향을 알아보기 위하여 실험한 결과, 전해질을 첨가하였을 경우 첨가하지 않았을 때보다 40% 정도의 효율이 증가하였다. 적정 전해질, 주입농도 및 반응시간을 알아보기 위하여 1N NaCl과 NaOH의 농도를 변화시켜 가면서 실험하였다. NaCl의 경우 더 좋은 효율을 나타내었다. 전해질의 농도는 0.2 - 1.0% 의 농도 범위에서 NaCl와 NaOH 모두 농도에 따라 순차적으로 효율이 증가하였다. 두 전해질 모두 0.4 - 1.0% 농도 범위에서 평형에 도달하는 시간은 20분으로 나타났다.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.158-160
• /
• 2007

The butt and lap configurational friction stir welding of type 304 stainless steel was conducted in this study. The sound joints were obtained by WC tool. As the welding distance increased, tool deformation gradually increased at the pin edge. The discoloration by oxidation was observed at the top surface of the joint, a sufficient heat-input was required to avoid the welding defect owing to the lack of stirring at the welding start point. Very fine grains were observed in the stir zone, and the grain coarsening was not observed in the heat affected zone.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.414-414
• /
• 2011

핵융합로는 고온의 고밀도 플라즈마에 노출되므로 고 열부하 및 플라즈마 이온에 의한 물성수치를 충분히 고려한 재질로 구축하여야 한다. 특히 핵융합의 연료인 중수소, 삼중수소와 관련하여 플라즈마 대면 부품, 블랑켓, 열 교환기 등의 구축재질에 대한 수소동위원소의 누설거동 데이터 확보는 삼중수소의 취급 및 안전성과 경제성 측면에서 매우 중요하다. 현재 국내의 삼중수소 누설거동과 관련된 실험장치 개발 및 데이터는 관련 연구가 진행되는 선진국에 비해 초보적인 수준이며, 핵융합 기술의 자력개발을 위해서도 수소동위원소 관련 누설거동 데이터의 확보는 매우 중요하다. 본 연구는 삼중수소 누설거동 해석을 위한 예비 실험으로, 수소를 사용하는 누설거동 실험장치를 설계 제작하여 기초실험을 수행하였다. 시편은 스테인레스 스틸(SS-316L)을 사용하였으며, 시편의 두께를 변화시켜가며 수소에 대한 activation energy, permeability, diffusivity, solubility를 구한 후 타 연구그룹의 실험결과와 비교 하였다.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.6
• /
• pp.365-373
• /
• 1997

316L and 420 Stainless steels were deposited onto AZ9ID commercial magnesium alloy by plasma spray process with various gas flow rate of, TEX>$H_2$ secondary gas. And hardness as well as were track volume, coefficient of friction also had been measured. wear and hardness were measured by using reciprocal configuration tribometer and microghardness tester, respectively. Also, the microstructure of the coatings surface the cross sectional area of coating surface and cross sectional area of coaing/Substrate interface had been analyzed with Scanning Electron Microscope(SEM) and Optical microscope(OM). Finally, optimal process parameters for the improvement of coating efficiency such as mechanical property and wear behavior were examined.

• Journal of the Korean Society of Safety
• /
• v.13 no.3
• /
• pp.60-66
• /
• 1998

ABS sensor ring has been manufactured by P/M method using 400 series ferrite stainless steel. The results are as following: It is supposedly sufficient to use for control computer due to good experimental results of magnetic characteristics. Compared with sensor ring made by iron, 400 series ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. Thus the decreasing production process has been obtained. As a result of hardness and tensile test, 400 series ferrite stainless steel shown a good endurance when it is combined to C/V joint, and has a good hardness properties endurable to sand and pebble impact.