• 한국정밀공학회지
• /
• 제13권2호
• /
• pp.48-61
• /
• 1996

In the hot strip mill, not only the chatter vibration of finishing stands has a great influence on the surface quality of hot products, but also that is the major factors to shorten the life of rolling mill housings or to create the machine troubles. As long as the mill has been operating, the low frequency chatter at the early mill stands (No.2 and No.3) of POSCO's Kwangyang No.2 hot strip mill had been detected when rolling certain types of products, e.g., thinner gage, hard grade products. For several years, the experimental study was undertaken to analyze the cause of the chatter vibration and establish the methods to avoid the vibration to acceptable levels. The analysis and solution to the vibration problem with recommendations and revised maintenance practice are the subjects of this article.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.963-968
• /
• 2003

The continuous process systems usually consists of various components: driven rollers. idle rolls, load-cell and so on. Even a simple fault in a single component in the line may cause a catastrophic damage on the final products. Therefore it is absolutely necessary to diagnosis the components of the continuous systems. In this paper, an adaptive eccentricity compensation method is presented. And a new diagnosis method for transverse roll shape defects on rolling process is developed. The new method was induced from analyzing the rolling mechanism by using rolling force model, tension model, Hitchcock's equation, and measured delivery thickness of materials etc. Computer simulation results also show that the proposed diagnosis methods is very effective in the diagnosis of 3-D roll shape

• 제어로봇시스템학회논문지
• /
• 제2권3호
• /
• pp.134-141
• /
• 1996

In this paper, we formulate the mathematical model for a single-stand rolling mill and design control systems for the thickness control at the exit of roll stand and for the tension control of the strip in the process. We propose a thickness controller based on the Internal Model Control structure which can be an effective application when the frequency components of the thickness deviation of the entry strip are known and, show how it can be appropriately combined with BISRA AGC method for a precise thickness control while maintaining the robustness against the modeling error of the mill modulus. It is illustrated by simulations that the proposed thickness control method gives better performance than existing methods and has the robustness against the modeling error of the mill modulus as well.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제26회 추계학술대회
• /
• pp.161-166
• /
• 1997

Application of hot roiling oil lubrication technology was broadened to the field of RM stands of Hot Rolling Mill at Pohang works. The primary object was to improve the quality of the strip sttrface and the rolls by oil lubrication in hot rolling process. Prior to the actual field application preliminary test was conducted to evaluate the effect of hot rolling oil lubrication at RM stands. From the test, it has been found that the use of oil lubrication tends to prevent the progression of the heat cracks and thereby increases the quality of the strip surface and the wear life of the rolls. New hot rolling oil lubrication system was applied to the RM stands VSB, R1, R2, R3, R4 and edger rolls. With the introduction of a rolling lubricant, the quality of the strip surface and rolls was improved and overall roll dressing has decreased. Also there has been a improvement of productivity from the long roll life.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.287-290
• /
• 1997

각 스탠드 유한요소해석 결과인 기계적-열적 변수들을 이용하여 재결정계산을 한다. 이때 온도변화를 정확히 반영하기 위해 재결정부피율 계산과 결정성장 계산에 additivity rule을 도입하였다. 또한 여러단계의 압연공정 각각에서의 재결정거동을 계속 추적하기 위해 또한 이때의 재결정의 영향을 재료유동에 반영하기 위해 substructure의 개념을 도입하였다. 이러한 과정을 거쳐 7패스후의 최종 두께방향으로의 결정크기분포를 얻을 수 있다. 본 연구 에서는 이때의 최종결정크기 분포를 균일화 시킬 수 있는 공정을 유전 알고리즘을 이용하여 찾아보았다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.349-358
• /
• 2004

The strip temperature history of finishing mill process is one of the most important factors to stabilize the facilities and to achieve the better product quality including a better prediction of roll force etc. The ultimate goal of this study is to improve scientific understanding of the finishing mill process in the view of heat transfer science. Finishing mill cooling facilities of KwangYang $\#3$ hot rolling are introduced and heat transfer analyses from FET to FDT are particularly focused in this study Three major tasks are successfully achieved as follows: 1) The temperature Prediction Models are developed. 2) The average absolute error is found to be less then 10 Celsius degree (about $8.5^{\circ}C$). 3) Prediction rate (less then $\bar{+}20$) are $10.2\%$ improved $(80.1\;\rightarrow\;90.3\%)$.

• 무역상무연구
• /
• 제12권
• /
• pp.495-518
• /
• 1999

Since the end of World War II, the standby letters of credit have been used as a surety device, serving as a performance bond and guarantee in the world. In Korea, the standby letters of credit have been also being used in international transactions. But there have been a few studies on the standby letters of credit. This study is carrying out to reveal the characteristics of the standby letters of credit and the documentary letters of credit and also between the standby letters of credit and guarantees. Secondly, this study is carrying out to indicate types of practical use of standby letters of credit in international transactions, i.e. bid bonds, performance bonds, advanced payment guarantees etc.. Finally, this study is carrying out to indicate governig rules regarding standby letters of credit, i.e. URCG, URDG, UCP, UN Convention on Independent Guarantees and Standby Letters of Credit, ISP etc..

• 한국고분자학회지:고분자과학과기술
• /
• 제15권2호
• /
• pp.228-233
• /
• 2004

본 기고부분에서는 레이저 라만 분광법을 이용하여 나노입자에 흡착된 자기조립박막의 구조를 밝히고 응용성을 모색하는 일을 소개하고자 한다 Au 나노입자는 최근 재료과학과 의학 및 생물학에서 그 쓰임의 폭이 넓어지고 있다. 나노입자가 처음 사용된 예들 중에 가장 잘 알려진 것은 고대 로마 시대의 Lycurgus 컵에 기인한다고 한다. 컵 안에 함유된 미량의 은이나 금 나노입자에 의해서 반사했을 때와 투과할 때의 빛깔이 다르게 보이며 이러한 성질은 중세건축물의 스탠드 글라스에 이용되어 왔다. 근대적인 의미에서 Au 콜로이드의 수용액이 작은 미세입자가 분산되어 있다고 생각한 사람은 전기화학의 창시자라 할 수 있는 영국의 Faraday라 할 수 있다.(중략)

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.212-212
• /
• 2000

This study was performed to construct a hot strip speed measuring system and check over whether the measured speed can be used for improving the mass flow of the head-end part of a hot strip in the 7-stand finishing mill. Because the mass flow in hot rolling mill affects the looper operation and the thickness and width control of a strip, accurate measurement of strip speed ie important. The measured speed was compared with the roll speeds of No. 6 and No.7 stand to check the performance of the system and analyzed to find how to apply the speed. As a result, it is shown that the accuracy of the system is enough, strip thickness error can be reduced by -275∼+200$\mu\textrm{m}$ using the measured speed and the existing FSU model has low accuracy for predicting forward slip rate. A neural network was developed to calculate forward slip rate instead of FSU model. The test result of the neural network shows that the neural network is more accurate than the FSU model.

• 패션비즈니스
• /
• 제9권2호
• /
• pp.143-159
• /
• 2005

This study was done to provide basic data for clothing design and thus to contribute to the academic development at the clothing and textile area and collar roll line lay down angle variation at collar width on the open collar. The study was composed as tallows: 1. The variation at collar outer wall size increase collar roll line lay down angle size the more Increase. 2. The outer wall and stand height size increase aware at variation collar width at the more Increase. It is desirable that this study will be at help to enchancement of life style in garments and promotion of garments industury by developing the archetype basic collar pattern suitable to Korean women's garments.