• 한국생산제조학회지
• /
• 제25권6호
• /
• pp.452-457
• /
• 2016

Single screw compressors are widely used in the fields of air/gas compression, refrigeration, and chemical fluid transportation systems. A single-screw compressor is composed of a screw rotor and two gate rotors located at both sides. This simple construction enables low rotational speed of the rotor, efficient compression with low noise, low vibration, and long bearing life. Despite these merits, the design method of single-screw compressors is not well known. To accelerate the industrial application of single-screw compressors, a design method using coordinate transformation is presented in this paper, and a tool trajectory is established for machining. Finally, the screw rotor, which is machined using the proposed method, is presented.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.79-84
• /
• 1996

Recently a symmetric and non-symmetric profile of screw rotor has been designed in the interior. Howere the processing method of screw rotor and the cutter design for screw rotor were not studied. Therefor we could not make the shape of the screw rotor designed by profile function with computer. In this study we have made cutter profile design program and manufactured cutters for screw rotors using H.S.S We machined screw rotors of symmetric 4x6 profile non-sysmmetric 4x6 profile with almighty milling machine.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.907-912
• /
• 1994

Recently, a symmetric and non-symmetric profile of screw rotor has been designed in the interior. However the processing method of screw rotor and the cutter design for screw rotor were not studied. Therefore we could we could not make the shape of the screw rotor designed by profile function with computer. In this study, we have made cutter profile design program, and manufactured cutters for screw rotors using H.S.S. We have machined screw rotorts of symmetric 4*6 profile, non-symmetric 4*6 profile with almighty milling machine.

• 한국항공우주학회지
• /
• 제50권2호
• /
• pp.111-118
• /
• 2022

전기-기계식 구동기(EMA)는 전기 모터와 기계적 동력전달 요소를 결합한 것으로 설계 자유도와 유지보수 측면에서 도심 항공 모빌리티(UAM)에 적합하다. 본 논문에서는 UAM의 로터 블레이드 피치각을 조종하는 EMA에 대한 연구 결과를 제시한다. 구동기는 역구동형 롤러 스크류를 기반하며, 2절 링크를 통하여 블레이드 피치각을 조종한다. 구동기만의 동역학과 이것을 포함한 블레이드 피치운동의 동역학 방정식을 유도하였다. 블레이드 피치 동역학 방정식의 경우 링크의 영향으로 등가 관성모멘트는 링크 각도에 따라 변한다. 넛트 운동의 관점과 블레이드 피치 운동의 관점에서 등가 관성모멘트의 변동을 분석·비교하는 과정을 제시하였다. 사례로 선정한 모델의 경우에 전자의 등가 관성모멘트 변동이 후자에 비하여 작았으며, 그래서 넛트 운동의 관점에서 유도한 모델이 제어기 설계에 적합하다고 판단한다.

• 폴리머
• /
• 제39권3호
• /
• pp.441-452
• /
• 2015

Twin-screw kneader is an efficient polymer processing equipment. In this paper, the mixing performance of one novel intermeshing counter-rotating twin-screw kneader with different tip angles of the male rotor is simulated using the mesh superimposition technique (MST). Statistical analysis is carried out for the flow field using particle tracking technique, and distributive mixing performance is evaluated using the residence time distribution and segregation scale, while the dispersive mixing performance is estimated using the parameters such as shear rate, stretching rate and mixing index. The results show that the best distributive mixing performance is achieved when the tip angle is 0o, while the optimal dispersive mixing performance is obtained when the tip angle is 20o. The results in this paper provide a data basis for the selection of parameters and optimization of the performance for the screw rotors.

• 한국유체기계학회 논문집
• /
• 제16권1호
• /
• pp.5-10
• /
• 2013

The performance of screw air compressor is affected by rotor profile, lobe number, air end wrap angle, rotor L/D ratio, suction and discharge ports, revolutions of air end and load regulation control, etc. In general, an efficient screw compressor needs a rotor profile of which has a large flow cross-section area, short sealing lines and a small blow-hole. In this study, experimental study was performed with newly designed $5{\times}6$ rotor profile and various shapes of air end. Results show that the measured specific power consumption of the newly designed screw compressor appeared to be lower than any other published data for the equivalent screw compressors manufactured.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.139-142
• /
• 1999

Screw rotors are core parts of screw type air compressors, compressors in refrigerating machines and super chargers of automobiles etc. They are composed of a female and a male rotors which have complex section profiles and helically swept geometry. Screw type compressors have advantages of low noise, high efficiency, less needs in maintenance etc. Usually, machining process of screw rotors requires long machining time using CNC machine designed only for screw rotors, which increase the cost of production. In this work, the screw rotors for air-compressors were manufactured with fiber reinforced epoxy composite materials by resin transfer molding process. The mold for the RTM process was made of aluminum and silicon rubber and was designed for release of helical shape products. Composite screw rotors, manufactured by RTM process, have advantages of lightweight, less cost of production, good characteristics of vibration etc.