• 전기산업
• /
• v.7 no.2
• /
• pp.110-113
• /
• 1996

• Resources Recycling
• /
• v.16 no.3 s.77
• /
• pp.27-33
• /
• 2007

It is very important in the view point of resource recycling to recover valuable metals such as copper and tin from waste electric and electronic scrap. The waste electric and electronic scrap contains significant amounts of copper, tin, and so on. In this study, a new process for extracting copper and tin contained in the waste electric and electronic scrap using waste copper slag which is generated from the melting furnace of copper smelter was presented. Advantage of the proposed process is to reuse waste copper slag instead of new fluxes as slag formatives. In each experiment, the waste electric and electronic scrap and waste copper slag were melted inputting suitable amount of CaO as an additional flux. Up to 95% of copper and 85% of tin in the raw material were extracted in a Cu-Fe-Sn alloy phase.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.57-63
• /
• 2003

In this study, the separation of neodymium was investigated from NdFeB permanent magnet scrap. Decomposition and leach-ing process of NdFeB permanent magnet scrap by oxidation roasting and sulfuric arid leaching were examined. Neodymium could be separated from iron by double salt precipitation using sodium sulfate. The optimum conditions established for decom-position and leaching are as follows: oxidation roasting temperature is $500^{\circ}C$ for sintered scrap and $700^{\circ}C$ for bonded scrap, concentration of sulfuric acid in leaching solution is 2.0 M, leaching temperature and time is $50^{\circ}C$ and 2 hrs, and pulp density is 15%. The leaching yield of neodymium and iron was 99.4% and 95.7% respectively. The optimum condition for separation of neodymium by double-salt precipitation was 2 equivalents of sodium sulfate and $50^{\circ}C$ The yield of neodymium was above 99.9%.

• Resources Recycling
• /
• v.27 no.3
• /
• pp.48-57
• /
• 2018

In this study, we developed a method for manufacturing high strength gray cast irons by adding a rare earth element (R.E.) included in a spent permanent magnet scrap to gray cast irons. The improvement of the mechanical properties of gray cast irons is attributed to A-type graphite formation promoted by complex sulfide, which was formed by R.E. in the spent magnets during a solidification process. The cast specimen inoculated by R.E. in the spent magnet scrap showed excellent tensile strength up to 306 MPa, and is similar to that of the specimen inoculated by expensive misch-metal. In this regards, we concluded that the cheap spent magnets scrap is a very efficient inoculation agent in fabrication of high performance gray cast irons.

• Resources Recycling
• /
• v.14 no.5 s.67
• /
• pp.24-31
• /
• 2005

In order to recover valuable metals from fine-grained electronic waste, bioleaching of Cu, Zn, Al, Co, Ni, Fe, Sn and Pb were carried out using Aspergillus niger as a leaching microorganism in a shaking flask. Aspergillus niger was able to grow in the presence of electronic scrap. The formation of organic acids(citric and oxalic acid) from Aspergillus niger caused the mobilization of metals from waste electronic scrap. In a preliminary study, in order to obtain the data on the leaching of Cu, Zn, Al, Fe, Co and Ni from electronic scrap, chemical leaching using organic acid(Citric acid and Oxalic acid) was accomplished. At the electronic scrap concentration of 50 g/L, Aspergillus niger were able to leach more than 95% of the available Cu, Co. But Al, Zn, Pb and Sn were leached about 15-35%. Ni and Fe were detected in the leachate less than 10%.

• Resources Recycling
• /
• v.28 no.3
• /
• pp.68-76
• /
• 2019

It is very necessary for the metal recycling industries and the researchers to understand the current status of demand and supply of non-ferrous metals and their scraps. Domestic demand and supply of non-ferrous metals and their scraps have been surveyed and reported on the journal of the Korean Institute of Resources Recycling since ten years before. However, it was confined to six major non-ferrous metals such as copper, aluminum, zinc, lead, nickel and magnesium because there are so many kind of non-ferrous metals. In this article also, demand and supply of these non-ferrous metals in addition tin during recent five years (2014 ~ 2018) in Korean markets were reviewed, and their recycling ratio of scraps were briefly estimated. The statistical data were mainly cited from the data issued by Korea Customs Service (KCS) and Korea Non-Ferrous Metal Association, and some fragmental published review articles from magazines and other technical reports.

• Journal of Korea Foundry Society
• /
• v.41 no.2
• /
• pp.139-143
• /
• 2021

A type of titanium alloy, ferro-titanium, is the main material used to manufacture steel and stainless steel. Considering economic aspects, ferro-titanium ingots are intended to be manufactured using low-cost titanium scrap, and the best pretreatment process for removing impurities from recycled titanium scrap surfaces was studied here. Instead of ordinary acid or organic solvents, ecofriendly methods were researched and applied, and chip scrap materials were used. A high-quality ferro-titanium ingot was manufactured from titanium scrap after a pretreatment process was applied, and the impurities and properties were analyzed and compared with commercial material standards through a component analysis.

• Journal of Navigation and Port Research
• /
• v.33 no.8
• /
• pp.563-572
• /
• 2009

The steel industry, as the national representative strategic industry of our country, has played the motive power for the economic growth of Korea in 1970s as the positive support of the government and the management endeavor of the private were harmonized. However, in case of our country, we have mostly relied on import of the raw materials for the steel industry, and as the weight of the imported raw materials is heavy, the steel industry is the industry whose transport burden is big as it is called 'transport industry'. So, the transport rationalization will be the important task of the steel industry. This study has analyzed the economic efficiency per the transport route (container ship vs bulk ship) of the sea transport related to import/export of the steel scrap on the level acquiring the stable supply of the steel scrap. For this, this study firstly researched the status of domestic/foreign steel industry. And analyzed the world crude steel production volume, steel scrap consumption volume and world steel scrap trading structure. Also, in order to compare the transport logistics expenses between two transport devices, namely, container ship and bulk ship, this study calculated the logistics expenses per ton by using the traffic hours and traffic expenses items as the imported/exported scrap freights of 'D' company.

• Resources Recycling
• /
• v.18 no.4
• /
• pp.14-23
• /
• 2009

In terms of resources recycling and resolving waste disposal problems, it is very important to recover precious metals like Au, Ag and Pd and valuable metals like Cu, Sn and Ni from the scraps of waste electrical and electronic equipment(WEEE) that consists of detective electrical and electronic parts discarded during manufacturing electrical and electronic equipments and waste electrical and electronic parts generated during disassembling them. In general, the scraps of WEEE are composed of various metals and alloys as well as refractory oxides and plastic components. Precious and valuable metals from the scraps of WEEE can be recovered by gas-phase-volatilization, hydrometallurgical, or pyrometallurgical processes. However, the gas-phase-volatilization and hydrometallurgical processes have been suggested but not yet commercialized. At the present time, most of the commercial plants for recovering precious and valuable metals from the scraps of WEEE adopt pyrometallurgical processes. Therefore, in this paper, the technical and environmental aspects on the important pyrometallurgical processes through literature survey are reviewed, and the scale-up result of a new pyrometallurgical process for recovering the precious and valuable metals contained in the scraps of WEEE using waste copper slag is presented.

• 전기산업
• /
• v.7 no.4
• /
• pp.103-107
• /
• 1996