• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1989년도 제9회 학술강연회초록집
• /
• pp.48-59
• /
• 1989

최근 터어보 샤프트, 터어보 팬, 터어보 쳇트 엔진, 가스 터어빈, 공작기계의 주축, 그리고 섬유기계 섬유봉등의 회전기계류 설계에서 단위 무게당 출력의 비율을 높이기 위해서 회전속도의 고속화가 요구되고 있다. 이러한 경우 회전축계의 진동특성에 크게 영향을 미치는 감쇠특성을 부각시키기 위하여 베어링의 외부에 스퀴즈-필름 댐퍼 (Squeeze-film Damper)를 부가하고 회전축계를 유연하게 지지하여 줌으로써 진동문제를 간단히 해결하며 회전속도의 고속화를 가능하게 할 수 있다. 적합하게 설계된 스퀴즈-필름 댐퍼의 잇점은 다음과 같다. (a) 회전축의 위험속도를 작은 공진쪽으로서 통과하는 것이 가능. (b) 베어링과 지지구조물에 전달되는 하중이 감소 (c) 장기간 사용중, 마모 및 브레이드 파손에 의해 진폭이 증가된 불평형 강제진동에서도 안정된 운전이 가능 (d) 미끄럼 저어널 베어링에 지지된 회전축계의 고속회전에서 불안정한 자려진동이 나타나는 안정 한계속도를 높히는 것이 가능

• 소음진동
• /
• 제11권2호
• /
• pp.301-306
• /
• 2001

Electro-Rheological (ER) fluid is applied to a controllable squeeze film damper (SFD) for stabilizing a flexibly supported rotor system. ER fluid is a class of functional fluid whose yield stress varies according to the applied electric field strength, which is observed as viscosity variation of the fluid. In applying ER fluid to a SFD, a pair of rings of the damper can be used as electrodes. When the electrodes are divided into a horizontal pair and a vertical one, the SFD can produce damping force in each direction independently. A prototype of the directionally controllable SFD was constructed and its performance was experimentally and numerically investigated in the present work.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.67-70
• /
• 2002

This paper presents the property of the Squeeze Film Damper (SFD) using Magneto-Rheological fluid (MR fluid). The damping property of a SFD for a flexible rotor system varied according to vibration mode. MR fluid is known as a functional fluid with controllable apparent viscosity of the fluid by applied magnetic field strength. When the MR fluid is applied in the SFD, the SFD using MR fluid can effectively reduce vibrations of the flexible rotor in a wide range of rotating speed by control of the applied magnetic field strength. To investigate in detail the SFD using MR fluid, the SFD to support one mass was constructed and its performance was experimentally investigated in the present study. The damping property of the SFD using MR fluid has viscous damping by Newtonian fluid, but not Coulomb friction by Bingham fluid. Therefore, The system damped by the SFD can be considered as a linear system.

• Tribology and Lubricants
• /
• 제34권1호
• /
• pp.9-15
• /
• 2018

Modern high-performance automotive turbochargers (TCs) implement ceramic hybrid angular contact ball bearings in series with squeeze film dampers (SFDs) to enhance transient responses, thereby reducing the overall emission levels. The current study predicts the rotordynamic responses of the commercial automotive TCs (compressor wheel diameter = ~53 mm, turbine wheel diameter = ~43 mm, and shaft diameter at the bearing locations = ~7 mm) supported on ball bearings and SFDs for various design parameters of SFDs, including radial clearance, axial length, lubricant viscosity, and rotor imbalance conditions (i.e., amplitudes and phase angles) while increasing rotor speed up to 150 krpm. This study validates the predictive rotor finite element model against measurements of mass, polar and transverse moments of inertia, and free-free mode natural frequencies and mode shapes. A nonlinear rotordynamic model integrates nonlinear force coefficients of SFDs to calculate the transient responses of the TC rotor-bearing system. The predicted results show that SFD radial clearances, as well as phase angles of rotor imbalances, have the paramount effect on the dynamic responses of TC shaft motions.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1992년도 제15회 학술강연회초록집
• /
• pp.77-81
• /
• 1992

스퀴즈 필름 댐퍼 (Squeeze Film Damper, SFD)는 구조가 단순하면서도 감쇠성능이 우수하여 구름베어링에 지지된 고속회전체의 댐퍼로 이용되고 있으며 특히 대부분의 항공기용 터보엔진에 장착되어 고속회 전체의 댐퍼로서의 우수성을 보여주고 있다. 또한 동력기계의 단위 무게당 고출력화 경향으로 인하여 회전체의 경량화와 고속회전은 더욱 절실히 요구되고 있다. 이에따라 기계의 회전속도를 제 1차 또는 제 2차 위험속도(critical speed)이상까지 상승시켜야 하므로 SFD의 활용범위는 앞으로도 점차 증가할 것이다. 본 논문에서는 Swift-Stieber 경계조건을 적용하여, 공동현상이 발생하는 무한 폭 SFD의 유막력과 감쇠계수를 구한 후 강성 및 유연회전체의 정상상태 응답을 해석함으로써 공동현상이 회전체-SFD계의 진동에 미치는 영향을 연구하고자 한다.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.131-136
• /
• 2004

탄성회전축을 위한 실제적이고 효과적인 댐퍼를 개발하기 위하여 4개의 새로운 스퀴즈 필름 댐퍼들이 실험적으로 연구되었다. 이들 중에서 원통형 부쉬 댐퍼가 가장 효과적인 것으로 선택되었고 볼베어링으로 지지된 실험 회전축에 적용되었다. 이러한 회전축은 위험속도를 지나서 안정된 운전이 관찰되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.342.1-342
• /
• 2002

In this work, the dynamic characteristics of an oil-lubricated, short SFD with a central feeding groove are derived based on a theoretical analysis considering the effect of a groove. The validity of the analysis is investigated experimentally using an Active Magnetic Bearing (AMB) system as an exciter. For the theoretical solution, the fluid film forces of a grooved SFD are analytically derived so that the dynamic coefficients of a SFD are expressed in terms of its design parameters. (omitted)

• 소음진동
• /
• 제10권6호
• /
• pp.1029-1034
• /
• 2000

A new electro-rheological squeeze film damper (ER-SFD) has been sealed with slotted piston rings which have electrodes at the inside of the constant gap. The slotted ER-SFD can prevent the problem of electric discharge which might be occurred in the previous configuration of an ER-SFD. The current paper presents the extraction of linearized dynamic coefficients within small orbit where these coefficients are controlled by the application of electric strength. Test rig has been modified to isolate the damper section for dynamic coefficient extraction. The results show that rotordynamic coefficients, damping and inertia terms, increase with increasing supply voltages, while stiffness coefficients decrease with increasing supply voltages. notating speed of rigid shaft does not affect these coefficients.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.805-809
• /
• 2001

This paper is presented to determine the optimal parameters of squeeze film damper using an enhanced genetic algorithm (EGA). The damper design parameters are the radius, length and radial clearance of the damper. The objective function is minimization of a transmitted load between bearing and foundation at the operating and critical speeds of a flexible rotor. The present algorithm was the synthesis of a genetic algorithm with simplex method for a local concentrate search. This hybrid algorithm is not only faster than the standard genetic algorithm, but also gives a more accurate solution and can find both the global and local optimum solution. The numerical example is presented that illustrated the effectiveness of enhanced genetic algorithm for the optimal design of the squeeze film damper for reducing transmitted load.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.739-744
• /
• 2001

In order to investigate the stability of magneto-rheological fluid based squeeze film damper (MR-SFD), its negative stiffness effect, which arises from magnetization of MR-SFD, is identified theoretically and experimentally. The analytical model of MR-SFD includes the magnetic circuit as well as the displacement stiffness associated with the squeeze mode of MRF. Extensive experiments are carried out to measure the magnetic attraction forces generated in the MR-SFD, with the excitation frequency and the eccentricity of the journal varied, which are controlled by an active magnetic bearing. The simulation and experimental results are found to be in good agreement. It is concluded that the negative stiffness effect dominates only in the low frequency region because its effect diminishes in the high frequency region due to the eddy-current loss.