• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.664-674
• /
• 1996

In high speed multi-wavelength networks, retransmission overhead due to desination conflict or control packet collision is one factor of performance degration because signal prpagation delay is much larger than the transmission time of data packet. In this paper, an efficient WDMA protocol with a collision avoidance mechanism is proposed for high speed WDM single-hop network with a passive star topology. In proposed protocol, each node has cource queues and routing table to store souting informatio. This architecture makes is possible to avoid any kind of collision when a node reserves the channel to transmit a data packet. High system thoughput and channel utilization can be achieved by proposed protocol since there are no discarded packets caused by any collision at transmission time. The performance of proposed protocol is evaluated in term of throughput and delay with variations in offered load. Simulation results show that the proposed protocol has superior performance to convertional protocols under nonuniform traffic as well as uniform traffic.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.1
• /
• pp.59-69
• /
• 2018

The up-to-date business environment for Korean manufacturers is very complex and rapidly changing. Especially, the companies have faced with various changes derived from small quantity batch production, diversification of customer demands, and short life cycles of products. Consequently, the Korean manufacturing companies are in need of more efficient production planning and scheduling techniques. In this paper, the research trend of scheduling techniques is investigated to provide relevant information to researchers in this field. Furthermore, some implications for future researches are presented regarding literatures published in Korea over the last 10 years. This paper presents an entire investigation into Korean research works on scheduling (2,569 papers) that are published from 2007 to 2016. Especially, detailed analysis was carried out in the following three industry : 1) semiconductor, 2) shipbuilding and 3) automobile. In this paper, approaches to scheduling presented in the literature are categorized into the following three categories : 1) application, 2) algorithm, and 3) simulation modeling. First, in the semiconductor industry, scheduling techniques related to semiconductor cleaning processes, photolithography processes, chemical processes, transport and transport equipment have been found to be dominant. Second, the shipbuilding industry is focused on assembly processes, transporter, crane and various existing production management system. On the other hand, the scheduling research of the automobile industry is mainly focused on the vehicle movement routing and procurement supply-chain planning algorithm in terms of logistics. The conclusion of this study are expected to provide many implications for various types of academic and practical follow-up studies related to scheduling in consideration of main characteristics of semiconductor, shipbuilding and automobile industries.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.826-834
• /
• 2002

Asynchronous third generation mobile communication system is able to service Packet Switching through adding GPRS Network to the second generation system GSM. Therefore, it is necessary to study packet traffic service of GGSN node which is due to perform gateway role that GPRS Network is enable to inter-connect with Internet in order to optimize the capability and performance of GGSN. In this paper, the Internet packet traffic model that it is arrived to GGSN node from the Internet is studied and In order to process the Inter traffic efficiently, performance analysis model in GGSN is proposed to optimize packet processing capability of each processor. In order to guarantee QoS requirement of the real time traffic Speech and Video, several scheduling algorithm is applied to performance model and each mechanism is compared with several performance parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.3
• /
• pp.207-215
• /
• 2013

This paper is channel assignment and scheduling techniques for efficient wireless AMI network. In AMI system, the multi-channel cluster network to be proposed defines the communication channel between NC (Network Coordinator) and CDA (Clustered Data Aggregator) as the network channel. CDA and OMD(Out Meter display) and communication channel between SMD(Smart Meter Device) are defined as the group channel. AMI network of the multi-channel cluster based in which the network channel and group channel is mixed increases the administration efficiency through the physical/logical consumer channel clustering. The reliability of inspection data through the channel use distinguished between the adjacent cluster is enhanced. In addition, the fast aggregation of data is possible and the size of a metering network is increased through the channel allocation of the multichannel cluster based.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.24-33
• /
• 2007

In this paper, two different dynamic cell coordination strategies for frequency flat and selective fading are proposed for efficient subcarrier allocation in the joint consideration of adaptive modulation and variable frequency reuse in the channel-aware OFDMA downlink multicellular environment. Compared to a conventional OFDMA system without cell coordination, where system throughput may become degraded due to the persistent interference from other cells, the proposed system dynamically allows RNC to apply different reuse factors on each subchannel and scheduling in consideration of channel and interference conditions of individual users so as to increase the system throughput and guarantee QoS of each user. In a frequency flat fading, the dynamic scheme with the proposed scheduling achieves on average three times larger throughput than the conventional dynamic scheme [8]. In a selective fading channel, the proposed schemes showed 2.6 times as large throughput as that of a single reuse factor of one for all subchannels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1001-1009
• /
• 2016

In LTE networks, the base station transmits control information over the physical downlink control channel (PDCCH) including scheduling grants, which are used to indicate the resources that the user equipment uses to send data to the base station. Because the size of the PDCCH message and the number of the PDCCH transmissions increase in proportion to the number of user equipments, the overhead of the PDCCH may cause serious network congestion problems in the narrowband LTE (NB-LTE) system. This paper proposes the compact PDCCH information bit allocation to reduce the size of the PDCCH message and evaluates the performance of the semi-persistent scheduling (SPS) in the NB-LTE system. The simulation results show that the SPS can significantly reduce the signaling overhead of the PDCCH and therefore increase the system utilization.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.12
• /
• pp.277-286
• /
• 2019

The Unmanned Aerial Vehicle (UAV) is one of the most precious inventions of Internet of things (IOT). UAV faces the necessity to charge battery or replace battery from the charging stations during or between services. We propose scheduling algorithms for drone power charging (SADPC). The basic idea of algorithm is considering both a deadline (for increasing deadline miss ratio) and a charging time (for decreasing waiting time) to decide priority on charging station among drones. Our simulation results show that our power charging algorithm for drones are efficient in terms of the deadline miss ratio as well as the waiting time in general in compare to other conventional algorithms (EDF or SJF). Also, we can choose proper algorithms for battery charge scheduling and charge ready battery allocation according to system parameters and user requirements based on our simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1026-1031
• /
• 2008

Nowdays, homes and small businesses rely more and more PON(Passive Optical Networks) for financial transactions, private communications and even telemedicine. Thus, encryption for these data transactions is very essential due to the multicast nature of the PON In this parer, we presented our implementation of a counter mode AES based on Virtex4 FPGA. Our design exploits three advanced features; 1) Composite field arithmetic SubByte, 2) efficient MixColumn transformation 3) and on-the-fly key-scheduling for fully pipelined architecture. By pipeling the composite field implementation of the S-box, the area cost is reduced to average 17 percent. By designing the on-the-fly key-scheduling, we implemented an efficient key-expander module which is specialized for a pipelined architecture.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.15 no.4
• /
• pp.18-29
• /
• 2019

A dynamic adaptive streaming server consumes high processor power because it handles a large amount of transcoding operations at a time. For this purpose, multi-processor architecture is mandatory for which effective transcoding task distribution strategies are essential. In this paper, we present the design and implementation details of the transcoding workload distribution schemes at a 2-tier (frontend node and backend node) transcoding server. For this, we implemented four schemes: 1) allocation of transcoding tasks to appropriate back-end nodes, 2) task scheduling in the back-end node and 3) the communication between front-end and back-end nodes. Experiments were conducted to compare the estimated and the actual power consumption in a real testbed to verify the efficacy of the system. It also proved that the system can reduce the load on each node to optimize the power and time used for transcoding.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.14 no.5
• /
• pp.40-52
• /
• 2018

Solid state drive (SSD) cache technologies that are used as a second-tier cache between the main memory and hard disk drive (HDD) have been widely studied. The SSD cache requires a new prefetching scheme as well as cache replacement algorithms. This paper presents a prefetching scheme for a storage-class cache using SSD. This prefetching scheme is designed for the storage-class cache and based on a long-term scheduling in contrast to the short-term prefetching in the main memory. Traditional prefetching algorithms just consider only read, but the presented prefetching scheme considers both read and write. An experimental evaluation shows 2.3% to 17.8% of hit rate with a 64GB of SSD and the 4GiB of prefetching size using an I/O trace of 14 days. The proposed prefetching scheme showed significant improvement of cache hit rate and can be easily implemented in storage-class cache systems.