• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.561-568
• /
• 2008

Research on the flow shop model has mainly been centered around periodic tasks scheduling. In this paper, we present an algorithm using synthetic utilization that can check the schedulability of aperiodic local tasks and aperiodic end-to-end tasks with precedence relation in the flow shop model. If the scheduling algorithm for aperiodic end-to-end tasks executed in the multiple stage pipeline is applied to the flow shop model, sometimes the actually schedulable tasks are decided to be not schedulable because of the fact that the actually unschedulable tasks are decided to be schedulable. The algorithm presented in this paper solves the problem, and the simulation shows that the schedulability increases 10%.

• Journal of KIISE:Information Networking
• /
• v.30 no.1
• /
• pp.38-47
• /
• 2003

Communication between Bluetooth devices is based on TDD by a master unit. In this discipline, the transmission of slave packets can be made only when the master transmits a packet to the slave. Thus, some slots may be wasted when there is no user data in the master's or slave's queue due to the transmission of a POLL or NULL packet. Therefore a scheduling scheme which can minimize the slot waste is required in Bluetooth intra-piconet communication. However, since the master is responsible for the intra-piconet scheduling, it must be provided with an information on each slave's queue length to apply traditional scheduling schemes. which is impossible in Bluetooth. This paper presents a new Bluetooth intra-piconet scheduling scheme that is efficient and does not require the information on each slave's queue length. The scheduling is done based on the information about the existence of data in the master and slave queues which is derived by the master identifying the type of packets transmitted. The master schedules to communicate with the slaves according to the priorities determined based on this information. We Presents simulation results which indicate a significant improvement in the performance when our proposed scheme is used.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.1
• /
• pp.139-144
• /
• 2023

Recently, many manufacturing companies are paying more attention to energy efficiency due to increased energy costs. Energy-efficient scheduling of production systems is a good method for energy efficiency improvement and cost reduction. In this research, we assumed the tire production problem and aim to construct a production scheduling considering specific shape module types, ordered amount for each tire, number of production modules, and the production time for each type. To facilitate effective production scheduling, we considered the types and number of shape modules currently available, and tire types that can be selected to be produced in the next stage were used as additional inputs, In addition to that, additional production was permitted to reduce the halt of production processing. Thus, an average production module utilization rate of about 62 percent was obtained.

• Proceedings of the Korea Database Society Conference
• /
• 1999.06a
• /
• pp.195-202
• /
• 1999

본 논문은 배전 계통에서 부하 제약조건과 운전 제약조건을 고려한 손실 감소와 부하 평형에 대해 시뮬레이티드 어닐링 알고리즘을 적용한 재구성 방법을 서술하였다. 네트워크 재구성은 수많은 연계 개폐기와 구분 개폐기의 조합에 의해 이루어지기 때문에 조합적인 최적화 문제이다. 이러한 문제는 수많은 조합에 제약조건까지 있어 해를 구하기가 쉽지 않을 뿐 아니라 국소 해에 빠질 가능성이 많다. 따라서 신경망 중에서 제약조건에 따라 신경망 구조에 영향을 미치지 않으면서 전역 최소해에 수렴하는 특성을 가진 시뮬레이티드 어닐링 기법을 이용하여 배전 계통의 선로를 재구성하였다. 시뮬레이티드 어닐링은 이론적으로 최적해가 보장되지만 무한대의 시간이 걸리기 때문에 현실적으로 적용할 때 해 공간을 탐색하는 규칙과 온도를 적절히 내리는 냉각 스케줄(cooling schedule)이 중요하다. 본 논문에서는 알고리즘 상에서 제약조건 위반 여부를 점검할 수 있는 제약조건과 페널티 상수(penalty factor)를 통해 목적함수에 반영하는 제약조건으로 나누어 모든 후보해를 가능해가 되게 하였고 기존에 사용되던 Kirkpatrick의 냉각 스케줄 대신에 후보해의 통계적 처리에 의해 온도를 내리는 다항-시간 냉각 스케줄(polynomial-time cooling schedule)을 사용하여 수행시간을 단축하고 수렴성을 높였다. 제안한 알고리즘의 효용성을 입증하기 위해 32, 69모선 예제 계통으로 테스트하였다.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 1999.03a
• /
• pp.195-202
• /
• 1999

본 논문은 배전 계통에서 부하 제약조건과 운전 제약조건을 고려한 손실 감소와 부하 평형에 대해 시뮬레이티드 어닐링 알고리즘을 적용한 재구성 방법을 서술하였다. 네트워크 재구성은 수많은 연계 개폐기와 구분 계폐기의 조합에 의해 이루어지기 때문에 조합적인 최적화 문제이다. 이러한 문제는 수많은 조합에 제약조건까지 있어 해를 구하기가 쉽지 않을뿐 아니라 국소 해에 빠질 가능성이 많다. 따라서 신경망 중에서 제약조건에 따라 신경망 구조에 영향을 미치지 않으면서 전역 최소해에 수렴하는 특성을 가진 시뮬레이티드 어닐링 기법을 이용하여 배전 계통의 선로를 재구성하였다. 시뮬레이티드 어닐링은 이론적으로 최적해가 보장되지만 무한대의 시간이 걸리기 때문에 현실적으로 적용할 때 해 공간을 탐색하는 규칙과 온도를 적절히 내리는 냉각 스케줄(cooling schedule)이 중요하다. 본 논문에서는 알고리즘 상에서 제약조건 위한 여부를 점검할 수 있는 제약조건과 페널티 상수(penalty factor)를 통해 목적함수에 반영하는 제약조건으로 나누어 모든 후보해를 가능해가 되게 하였고 기존에 사용되는 Kirkpatrick의 냉각 스케줄 대신에 후보해의 통계적 처리에 의해 온도를 내리는 다항-시간 냉각 스케줄(polynomial-time schedule)을 사용하여 수행시간을 단축하고 수렴성을 높였다. 제안한 알고리즘의 효용성을 입증하기 위해 32,69모선 예제 계통으로 테스트하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.367-372
• /
• 2016

In a modern smart building, sensors can detect various physical conditions, such as temperature, humidity, sound, motion, and light, which can be used in medical services and security, and for energy savings. This paper presents an efficient elevator scheduling system that utilizes smart sensor technologies with radio-frequency identification, video, and floor sensors to detect the arrival of elevator users in advance. The detected information is then delivered to the elevator scheduling system via building networks. By using this information, the proposed system makes a reservation call for efficient control of the elevator's direction and time. Experiments under a spectrum of traffic conditions show that the proposed system performs better than a legacy system with respect to average wait time, maximum wait time, and energy consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.3B
• /
• pp.189-203
• /
• 2012

In cognitive radio networks, a secondary user opportunistically accesses an empty channel based on periodic sensing results for avoiding possible interference to the primary users. However, local sensing does not guarantee the full protection of the primary users because hidden primary receivers may exist within the interference range of the secondary transmitter. To protect primary systems and simultaneously to maximize utilization of the secondary users, we need to derive carefully designed coexistence solutions for various network scenarios. In this paper, we propose coexistence conditions without any harmful interference in accordance with the uplink/downlink schedule and user position. We have classified the coexistence conditions into four different scenario cases depending on the provided information to the secondary network basestations. Computer simulation results demonstrated that the proposed method can be applied to the real cognitive radio system to improve the communication probability of CR devices.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.127-129
• /
• 2001

CAN 통신은 네트워크 시스템 제어를 통한 각종 산업설비에서 제어 및 자동화 관련 장비들간에 데이터 교환을 위한 통신망으로 널리 사용되고 있다. 이러한 CAN통신을 응용하여 실시간 메시지 송수신이 가능한 시스템을 구성하려면 메시지의 특성분류 및 메시지의 증가에 따른 트레픽 발생을 고려해야 한다. CAN의 제한된 속도에 따른 실시간 메시지 전송의 여부는 데드라인을 통한 메시지 설계로 성능을 보장받고 있다. 하지만 이러한 메시지의 송수신에 있어 단순 CAN네트워크 망에 의존한 설계만으로 메시지의 신뢰성을 보장받을 수 없다. 네트워크 상황에 따른 버퍼를 통한 능동적인 메시지 스케줄링 방법을 통하여 성능효과를 보장받을 수 있는 방법을 제안한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3B
• /
• pp.304-310
• /
• 2009

In this paper, we evaluate the performance of VoIP in OFDMA-based relay systems with various capabilities of relays. We classify relays according to capability as "mid-capability (MC)" and "high-capability (HC)" relay. In system with HC relays, not only base station (BS) but also relay station (RS) performs scheduling at its ova whereas only BS performs scheduling in system with MC relays using the information reported by MS (i.e. the received signal-to-interference-plus-noise ratio (SINR) of mobile station (HS), the amount of MS traffic, etc). In system with MC relays, the controling overhead of BS is larger than that of system with HC relays. However, since BS has all MS information, efficient resource allocation and scheduling is possible. We derived the "average packet delay," "good packet ratio," and "cell goodput" in a VoIP environment. The simulation results demonstrate that the system with MC relays has better VoIP performance over that with HC relays.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.5
• /
• pp.271-281
• /
• 2007

Real-time support of embedded OS is not optional, but essential in contemporary embedded systems. In order to achieve these system#s real-time property, it is crucial that schedulability analysis for tasks having its property have been accomplished before system execution. Acquiring Worst-Case Execution Time(WCET) of task is a core part of schedulability analysis. Because traditional WCET tools analyze only its estimation of application task(i.e. program), it is not considered that application tasks are affected by scheduling primitives(e.g. scheduler, interrupt service routine, etc.) of OS when it schedules them. In this paper, we design and implement WCET analysis tool which deliberates on scheduling primitives of system using embedded Linux widely used in embedded OSes. This tool can estimate either WCET of normal application programs or corresponding primitives which have an influence on schduling property in embedded Linux kernel. Therefore, precision of estimation about schedulability analysis is improved. We develop this tool as Eclipse#s plug-in to work properly in any platform and support convenient interface or functionality for user.