• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.1126-1129
• /
• 2011

본 논문은 사용자가 가상의 공간에서 직접 마켓을 형성하여 다른 사용자들과 거래하는 UCM(User Created Market) 개념을 적용하여 사용자들이 언제 어디서든 스마트폰으로 마켓을 형성하고, 다른 사용자들이 마켓을 이용할 수 있는 STOWAR 시스템을 개발하였다. 이 시스템은 사용자에게 최적화된 선별적 이벤트 통지 기능을 통해 정보 알림의 효율성과 정보 접근의 편이성을 제공하여 서비스 사용의 활성화를 기대할 수 있다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.515-516
• /
• 2021

본 논문은 대형 매장 및 편의점 등과 같은 상품의 구매와 판매가 이루어지는 시스템에서 RFID를 활용하여 무인 결제 서비스를 지원한다. 제안 기술은 사용자가 결제처리, 재고관리 기능을 갖는다. 결재 시스템은 상품 결재와 동시에 재고 관리가 가능하도록 설계하였다. 소비자의 입장에서는 편리하고 쾌적한 스마트 쇼핑 환경을 제공 받을 수 있고, 판매자 입장에서는 인건비 절감효과, 재고관리에 효율성과 편의성을 제공한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.86-88
• /
• 2023

선박의 입출항을 위해서는 항만 시설과의 유기적 연계가 필요하며 이는 자율운항선박에도 마찬가지로 적용된다. 항만 인근의 복잡한 해상교통 상황과, 정박지나 항로 등 항계 내에서 고려해야할 추가적인 환경 조건들은 자율운항선박의 운항의 난이도를 높이며, 항만의 시간/공간적 자원들을 고려하는 가운데 입출항을 수행하는 것은 자율운항선박과 항만 시설과의 연계를 필요로 한다. 본 논문에서는 스마트항만과 자율운항선박의 연계를 통해 안전한 입출항을 수행할 수 있도록 하는 입출항지원시스템의 연동 구조 설계 결과와 이에 대한 시뮬레이션 시험 환경 구축 결과를 다룬다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.63-70
• /
• 2008

In this paper, a smart sensor system for the MEMS pressure sensor was developed. A compensation algorithm and programmable calibration circuits were presented to eliminate errors caused by temperature drift of piezoresistive pressure sensors in itself. This system consisted of signal conditioning, calibration, temperature detection, microprocessor, and communication parts and these were integrated into a SOC. A RS-232 interface was employed for monitoring and control of a smart sensor system. The area of fabricated IC is $4.38{\times}3.78\;mm^2$ and a $0.35{\mu}m$ high voltage CMOS process was used. Compensation error for temperature drift of 50 KPa pressure sensors was measured into ${\pm}0.48%$ in the range of $-40^{\circ}C{\sim}150^{\circ}C$. Total power consumption was 30.5 mW.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.107-108
• /
• 2019

In the past, regional pilot service is provided by individual pilots directly on board each ship, but it will be difficult to provide this type of service in the near future when autonomous vessels are activated. This can be seen as the need for automation and intelligence of pilot service and provision of remote control system. In this paper, we propose a method, system, and service target that can carry out the electronic pilot service through the intelligence aids to navigation for smart port operation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1216-1221
• /
• 2022

Ships tend to be larger to increase the efficiency of cargo transportation. Larger ships lead to increased travel time for ship workers, increased work intensity, and reduced work efficiency. Problems such as increased work intensity are reducing the influx of young people into labor, along with the phenomenon of avoidance of high intensity labor by the younger generation. In addition, the rapid aging of the population and decrease in the young labor force aggravate the labor shortage problem in the maritime industry. To overcome this, the maritime industry has recently introduced technologies such as an intelligent production design platform and a smart production operation management system, and a smart autonomous logistics system in one of these technologies. The smart autonomous logistics system is a technology that delivers various goods using intelligent mobile robots, and enables the robot to drive itself by using sensors such as lidar and camera. Therefore, in this paper, it was checked whether the mobile robot could autonomously drive to the stop sign by detecting the passage way of the ship deck. The autonomous driving was performed by detecting the passage way of the ship deck through the camera mounted on the mobile robot based on the data learned through Nvidia's End-to-end learning. The mobile robot was stopped by checking the stop sign using SSD MobileNetV2. The experiment was repeated five times in which the mobile robot autonomously drives to the stop sign without deviation from the ship deck passage way at a distance of about 70m. As a result of the experiment, it was confirmed that the mobile robot was driven without deviation from passage way. If the smart autonomous logistics system to which this result is applied is used in the marine industry, it is thought that the stability, reduction of labor force, and work efficiency will be improved when workers work.

• The Journal of Society for e-Business Studies
• /
• v.20 no.1
• /
• pp.183-199
• /
• 2015

Due to the Four Major Rivers Restoration Project, Nakdong River Estuary Barrage's designed flood quantity has been largely increased, and this has caused to construct several drainage gates at the right side of Eulsukdo island to secure the safety of downstream river area. For successful functioning of Nakdong River Estuary Barrage, such as flood control, disaster prevention, and the securing of sufficient water capacity, drainage gates at the both sides of island have to operate systematically and reliably. To manage this under restricted personnel and resources, we have implemented the IOS (Integrated Operation System) by integrating previous facilities and resources via information and communication technologies. The IOS has been designed to have higher availability and fault tolerance to function continuously even with the partial system's failure under the emergency situation like flood. Operators can use the system easily and acknowledge alarms of facilities through its IWS (Integrated Warning System) earlier. Preparing for Integrated Water Resources Management and Smart Water Grid, the architecture of IOS conformed to open system standards which will be helpful to link with the other systems easily.

• Journal of Digital Contents Society
• /
• v.19 no.2
• /
• pp.259-267
• /
• 2018

In this study, we study the system to remotely transmit musical score based on Internet of Things(IoT). When musicians play music, they occasionally use the instrument and the musical score at the same time. At this time, the degree of immersion in music is reduced. In order to solve this problem, this paper proposes automatic sheet page turning system based on Internet of Things(IoT). The system can be remotely adjusted using the foot without using the hand. The system consists of a Wireless Smart Button equipped with Bluetooth and an application capable of operating the Wireless Smart Button. The Wireless Smart Button used Arduino based open source. We designed an application(App) to utilize it and proposed an intuitive UI.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.109-117
• /
• 2020

Recently, with the advent of the 4th industrial revolution, digital twins are emerging as an important technology that connects and integrates physical systems and cyber systems. In this article, we analyzed the major requirements of digital twins required for the construction of digital twins of power equipments in the energy field, focusing on the industry 4.0-based Asset Administration Shell(AAS). However, since not so many studies have been conducted yet on a common platform or demonstration model for implementing digital twins both domestically and internationally, digital twin requirements are analyzed with the consideration of digital twinning of power equipment in the energy field. Also, we suggested necessary procedures and specific functions of AAS to establish a smart energy digital twin in the future by analyzing the core requirements necessary for the construction and designing the AAS design for specific power equipment.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.2
• /
• pp.229-235
• /
• 2021

Blockchain, recognized as one of the core technologies of the 4th industrial revolution, is an Internet-based distributed data management system which does not require centralized control. Blockchain is characterized by the integrity and reliability of information, and blockchains can be used where such characteristics are required. Typical applications of blockchain include finance, transaction, and evaluation management. In this paper, we designed a blockchain-based evaluation management system that allows users to freely create and manage evaluation instances. Evaluation managers can create an evaluation instance according to their purpose and allocate evaluation items and evaluators. When the evaluators finish evaluating the evaluation items, the evaluation manager can aggregate the evaluation results for the instance. Someone, who want to perform evaluation for various purposes but do not have an evaluation system, can implement the evaluation system relatively simply by using this system. In addition, due to the characteristic of the blockchain, evaluators cannot modify the evaluation scores they have already recorded, and neither the system administrator nor the evaluation administrator can modify the evaluation scores. For this reason, the reliability of the evaluation increases.