• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1690-1691
• /
• 2011

본 논문에서는 H1N1 인플루엔자 A 바이러스(influenza A H1N1 virus) 검출을 위한 산화아연 나노구조(zinc oxide nano structure) 기반의 전기화학적 면역센서를 제작하고 그 특성을 분석하였다. H1N1 인플루엔자 A 바이러스는 빠른 전파 속도 때문에 정확하고 빠른 검출이 필요하다. 먼저, 2 $mm^2$의 표면적을 갖는 패턴된 금 전극 위에 열수방식(hydrothermal method)으로 성장시킨 산화아연 나노구조가 선택적으로 형성되도록 리프트-오프(lift-off) 방법을 사용하였다. 0.01 M phosphate buffered saline(pH 7.4)에서 2 ${\mu}g$/mL 농도의 1차 항체를 정전기력에 의해 산화아연 나노구조에 고정화한 후, 10 pg/mL ~ 5ng/mL 농도의 H1N1 항원을 적용하여 포획 항체에 결합시키고 HRP(horseradish peroxidase) 효소가 결합된 검출 항체를 항원에 결합시키는 샌드위치 ELISA법을 이용하였다. HRP와 반응하는 TMB(3,3', 5,5'-tetramethylbenzidine)와 과산화수소가 포함된 acetate buffered 용액(pH 5)을 전해질로 사용하고 순환전압전류 측정법(cyclic voltammetry)으로 센서의 특성을 분석하였다. 측정된 순환전압전류그래프(cyclic voltammogram)에서 H1N1 항원 농도 10 pg/mL ~ 5 ng/mL의 응답 전류는 276.47 ${\pm}$ 21.72 nA (평균 ${\pm}$ 표준편차, n=4) ~ 478.89 ${\pm}$ 6.21 nA로 측정되었고, logarithmic하게 증가하는 응답 전류 특성을 보였다.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.233-236
• /
• 2000

The structural, electrical and chemical characteristics of Al alloy thin film with low impurity concentrations AlW deposited by using dc magnetron sputtering deposition are investigated for the applications as data bus line in the TFT-LCD panel. The deposited thin films show the decrease of resistivity and the increase of grain size after the RTA at $300^{\circ}C$ for 20 min.. Moreover, the resistivity of AlW does not show appreciable grain size dependence after RTA. It is concluded that the decrease of resistivity after RTA is due to the increase of grain size. The annealed AlW is found to be hillock free. And for investigating chemical attack in TFT-LCD etching processing the electric potential of AlW alloy for Ag/AgCl were investigated by cyclic voltammetry. When W wt.% of AlW alloy was higher than about 3%, the electric potential of AlW was more positive than ITO's. Therefore AlW alloy thin film can be propose to use for data bus line.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1022-1028
• /
• 1997

This work was performed to study the characteristics of electrochemical intercalation reactions occurring at the interface between the organic electrolyte and tungsten trioxide thin film (thickness of $4000{\AA}$) prepared by e-beam evaporation method as cathodically coloring oxide with regard to the electrochromism by the intercalating reactions of the lithium cation in the 1M $LiClO_4/PC$ organic solution. The characteristics of electrochemical intercalation reactions were investigated by various DC electrochemical methods such as cathodic Tafel polarization test, multiple and the single sweep cyclic voltammetry and the coulomety titrations method. The surfaces of thin films were observed with the patterns of X ray diffraction after the coloring and bleaching reactions. In comparison with the previous results that $WO_3$ thin film intersely detached from the surface of electrode when the hydrogen cation was intercalated into $WO_3$ thin film in the o.1N $H_2SO_4$ aqueous solution, the intercalation reaction of lithium cation into $WO_3$ thin film in the 1M $LiClO_4/PC$ organic solution was shown that the stable bleaching and coloration was appeared within 1.0V of the applied overpotential. When the overpotential of electrochromic reaction for lithium cation in the 1M $LiClO_4/PC$ organic solution had been applied up to 1.5V, the accumulation phenomenon of lithium in amorphous $WO_3$ thin film layer occurred because the inserted lithium into amorphous $WO_3$ thin layer for coloring process was not fully removed from the thin layer to the electrolyte during bleaching process. It was found that there is a limitation of applied overpotential for coloring process by the reduction of the current densities of bleaching and coloration after few number of coloring and bleaching cycles.

• Journal of the Korean Chemical Society
• /
• v.41 no.5
• /
• pp.246-250
• /
• 1997

In the presence of optimum amounts of hydroxylamine, trace ruthenium(III) can be conveniently determined in acidic (boric) media by coupling catalytic hydrogen processes with adsorptive accumulation of the catalyst, using differential pulse voltammetry. Cyclic voltammetry was used to characterize the redox and interfacial processes. Optimal experimental conditions were found to be a stirred borate (0.015 M, pH 2.5) solution containing 0.55 M hydroxylamine, a preconcentration potential of - 0.70 V, and a scan rate of 5 mV/s. With a 7 min accumulation period the detection limit was 3${\times}$10-10 M. The possible interferences by other platinum group metals are investigated.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.275-280
• /
• 2015

In this study, the current-voltage curves for stainless steel in the triethanolamine(TEA) solution was measured using the conventional three electrodes of cyclic voltammetry. Stainless steel as working electrode, Ag/AgCl electrode as reference electrode and Pt wire as counter electrode were used respectively. As a result, the C-V characteristics of stainless steel were to be for an irreversible process due to the oxidation current from cyclic voltammogram, using triethanolamine solutions. Effective diffusivity of corrosion inhibitors was decreased with increasing concentration. And the concentration of 0.5 N $NaClO_4$, $2.5{\times}10^{-3}M$ TEA solution when the corrosion inhibition effect is most great, and 1.5 N $NaClO_4$, $1.0{\times}10^{-3}M$ TEA solution, the lowest corrosion inhibition effect.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.311-315
• /
• 2010

The effects of $SO_2$ on the performance of proton exchange membrane(PEMFC) were investigated by introduction air containing $SO_2$ into cathode inlet of PEMFC. And the recovery of the cell performance by applying clean air, cycle voltammetry(CV) and high voltage holding following exposure contaminated air was studied. The $SO_2$ concentration range used in the experiments was from 20 ppb to 1.3 ppm. The performance degradation and recovery were measured by constant-current discharging, I-V polarization and electrochemical impedance spectroscopy(EIS). The cell voltage gradually decayed with time and decreased by 17 mV after 200 hours of 20 ppb $SO_2$ injection. The cell performance can be recovered partially by clean air flushing, CV and high voltage holding due to desorption of S from Pt catalyst.

• Journal of the Korean Chemical Society
• /
• v.51 no.5
• /
• pp.412-417
• /
• 2007

A simple prepared paste electrode (PE) of DNA immobilized on a carbon nanotube was utilized for monitoring the antibacterial agent oxytetracycline (OTC), using square-wave anodic stripping voltammetry (SWASV) and cyclic voltammetry (CV). Given these conditions, SWASV and CV working ranges were observed within 1-10 ngL-1 OTC. In the SWASV and CV for OTC concentrations of 0.1 mgL-1, the relative standard deviations (n=15) were 0.068 and 0.067, respectively. At the optimized condition, the detection limit was found to be 0.4 ngL-1 OTC. This method was applied to the hatchery fish tissue.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1932-1934
• /
• 2003

본 논문은 신경전달물질 중 우울증, 신부전증의 지표 물질인 세로토닌의 농도를 극미량의 시료를 사용하여 정량할 수 있는 방법을 개발하기 위해 초소형 효소 고정화 전극을 개발하였다. 전극은 실리콘 웨이퍼 상에 반도체 공정을 이용하여 마이크로 크기의 Pt 박막 전극을 제작하였고, 전기화학적 방법으로 pyrrole 단량체를 Pt 전극 상에 순환전압전류법을 이용하여 산화적으로 전기 중합하였다. 효소의 고정은 일정 전압을 인가한 시간대 전류법으로 고정화하였다. 제작된 전극은 시간대 전류법으로 세로토닌의 농도에 따른 감도를 측정하였다. 세로토닌의 농도 범위 $1.0{\mu}mol/L{\sim}10mmol/L$에서의 감도는 $7.0{\mu}$A/decade를 나타내었으며, 실험결과에 따라 전극의 표면에서 발생하는 전류는 세로토닌의 농도에 비례함을 알 수 있었다. 전극의 표면분석은 Scanning Electron Microscopy(SEM), Energy Dispersive X-ray Spectroscopy(EDX) 그리고 Auger Electron Spectroscopy(AES)를 이용하여 분석하였다.

• Membrane Journal
• /
• v.13 no.3
• /
• pp.162-173
• /
• 2003

The pseudo n-type polyaniline was prepared by doping of camphorsulfonic acid(CSA) and dodecylbenzenesulfonic acid(DBSA) as the dopants in solvent of N-methyl-2-pyrrolidinone(NMP). The dopants in polymer structure was qualitatively analyzed using FT-IR. The influence on electrochemical properties with dopant concentration of PANI film were investigated. The electrochemical characteristics of the n-type PANI electrode that coated on ITO were evaluated by cyclic voltammetry(CV) and AC impedance method. The prepared PANI were confirmed as n-type PANI from FT-IR and CV. The charge transfer resistance of film on PANI/CSA electrode were measured as 1.14{\sim}1.09k{\mu}$by AC impedance. The charge transfer resistance of PANI/DBSA electrode decreased with increasing the mole ratio of DBSA as 27.73{\sim}8.37 k{\mu}$. The double layer capacitance of PANI/CSA electrode was showed almost constant value as $13.47{\sim}14.59 {\mu}F$ and that of PANI/DBSA electrode increased with increasing mole ratio of DBSA from 0.49 to $1.20 {\mu}F$.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.1
• /
• pp.71-75
• /
• 2022

Graphene oxide was stirred with a ZnCl₂:NaCl electrolyte and electrochemically coated by cyclic voltammetry to simplify the electron transpfer layer film forming process for organic solar cells and to fabricate an organic solar cell having it. The device structure is FTO/ZnO:graphene/P3HT:PCBM/PEDOT:PSS/Ag. Morphology and chemical properties of ETL were confirmed by scanning electron microscopy(SEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. As a result of XPS measurement, ZnO metal oxide and carbon bonding were simultaneously confirmed, and ZnO and graphene peaks were confirmed by Raman spectroscopy. The electrical characteristics of the manufactured solar cell were specified with a solar simulator, and the ETL device coated twice at a rate of 0.05 V/s showed the highest photoelectric conversion efficiency of 1.94%.