• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.449-456
• /
• 2021

In this paper, we present a strategy to extend solution capability of an existing low Mach number preconditioned compressible solver to incompressible flows with a little modification. To this end, the energy equation that is of the same form of the total energy equation of compressible flows is used. The energy equation is obtained by a linear combination of the thermal energy equation, the continuity equation and the mechanical energy equation. Subsequently, a modified artificial compressibility method in conjunction with a time marching technique is applied to these incompressible governing equations for steady flow solutions. It is found that the Roe average of the common governing equations is equally valid for both the compressible and incompressible flow conditions. The extension of an existing compressible solver to incompressible flows does not affect the original compressible flow analysis. Validity for incompressible flow analysis of the extended solver is examined for various inviscid, laminar and turbulent flows.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.404-410
• /
• 2011

For the simulation of one-dimensional unsteady flow, the Taylor-Galerkin finite element method was adopted to the discretization of the Saint Venant equation. The model was applied to the backwater problem in a single channel and the flood routing in dendritic channel networks. The numerical solutions were compared with previously published results of finite difference and finite element methods and good agreement was observed. The model solves the continuity and the momentum equations in a sequential manner and this leads to easy implementation. Since the final system of matrix is tri-diagonal with a few additional entry due to channel junctions, the tri-diagonal matrix solution algorithm can be used with minor modification. So it is fast and economical in terms of memory for storing matrices.

• Annual Conference on Human and Language Technology
• /
• 2001.10d
• /
• pp.41-47
• /
• 2001

본 논문에서는 한국어 형태소 해석기에 다중 스레드 기법을 도입하여 다중 처리가 가능하도륵 하였다. 기존의 여러 형태소 해석기들은 언어 분석에만 관심이 있었기 때문에 다량의 문서를 동시에 처리하는 기능을 고려하지 않았다. 그러나 형태소 해석기가 정보 검색 시스템 분야에서 사용되기 시작하면서, 다수의 사용자가 대량의 문서를 처리해야 하는 필요성이 생겼다. 스레드 간에는 메모리 영역과 같은 자원을 공유한다. 이러한 특징 때문에 자칫하면 예상치 못한 결과가 야기될 수 있다. 따라서, 다중 스레드 기법을 사용하기 위해서는 스레드의 특징을 고려한 조치가 필요하다 기존의 한국어 형태소 해석기의 소스 코드를 분석하여 자주 사용되는 전역 변수는 하나의 구조체로 구성하였다. 그리고 이러한 전역 변수와 크기가 큰 지역 변수를 사용할 때 메모리를 동적으로 할당하였다. 또한, 파일에서 입력값을 읽어오거나 파일에 결과값을 쓰는 등 여러 스레드가 접근할 때 값이 변경될 위험이 있는 부분은 조건 변수를 이용하여 동기화 시켰다. 구현된 시스템의 검증을 위하여, 단일 스레드 방식으로 순차적인 처리를 하는 원래의 형태소 해석기와 비교 실험을 실시하였다. 35Kbyte 문서 30개를 처리하는 경우, 다중 처리가 가능한 형태소 해석기가 단일 스레드 방식의 형태소 해석기보다 처리속도가 약 12% 향상되었다.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.8
• /
• pp.565-570
• /
• 2013

Previous researches on mining sequential patterns mainly focused on discovering patterns from the point-based event. Interval events with a time interval occur in the real world that have the start and end point. Existing interval pattern mining methods that discover relationships among interval events based on the Allen operators have some problems. These are that interval patterns having three or more interval events can be interpreted as several meanings. In this paper, we propose the I_TPrefixSpan algorithm, which is an efficient sequence pattern mining technique for removing ambiguity in the Interval Patterns Mining. The proposed algorithm generates event sequences that have no ambiguity. Therefore, the size of generated candidate set can be minimized by searching sequential pattern mining entries that exist only in the event sequence. The performance evaluation shows that the proposed method is more efficient than existing methods.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1397-1405
• /
• 2013

The optimal rib pattern design of B-pillar trim considering occupant head protection can be determined by two methods. One is the conventional approximate optimization method that uses the statistical design of experiments (DOE) and response surface method (RSM). Generally, approximated optimum results are obtained through the iterative process by trial-and-error. The quality of results strongly depends on the factors and levels assigned by a designer. The other is a methodology derived from previous work by the authors, called the sequential design of experiments (SDOE), to reduce the trial-and-error procedure and to find an appropriate condition for using artificial neural network (ANN) systematically. An appropriate condition is determined from the iterative process based on the analysis of means. With this new technique and ANN, it is possible to find an optimum design accurately and efficiently.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.4
• /
• pp.81-86
• /
• 2003

Using DG for peak-shaving unit could reduce the overall system operating cost, and using DG for standby power unit could improve the reliability of the distribution system The models of peak-shaving unit and standby power unit are different from each other. The Monte-Carlo simulation is suitable for the purpose of the analysis of two DG models. In this paper, the reliability indices are calculated from the time-sequential method, and the merit and defect of the peak-shaving unit and standby power unit are investigated.

• The Journal of Engineering Research
• /
• v.6 no.1
• /
• pp.83-96
• /
• 2004

A soil mailed wall is adapted as road widening measure and is constructed under a miniature abutment built on steel pipe piles. The soil nailed wall called for removal of the existing embankment slope to permanently retain the fill behind the abutment. The soil nailed wall is fully instrumented and is monitored. A 3D finite element analysis is used to study further the behavior of the soil nailed wall. The complete sequence of construction is simulated. The numerical model is calibrated against the instrumented nailed wall. Then a parametric study is conducted. The results provide valuable information related to the effect of the excavation and nailing on the following: axial load and bending moment in the piles, load in the nails, and wall deflections.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.156-162
• /
• 2008

The static aeroelastic analysis of composite hingeless rotor blades in hover was performed using free-wake method. Large deflection beam theory was applied to analyze blade motions as a one-dimension beam. Anisotropic beam theory was applied to perform a cross-sectional analysis for composite rotor blades. Aerodynamic loads were calculated through a three-dimensional aerodynamic model which is based on the unsteady vortex lattice method. The wake geometry in hover was described using a time-marching free-wake method. Numerical results of the steady-state deflections for the composite hingeless rotor blades were presented and compared with those results based on two-dimensional quasi-steady strip theory and prescribed wake method. It was shown that wakes affect the steady-state deflections.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.281-286
• /
• 2006

본 연구의 목적은 차세대 대체에너지로 각광받는 풍력발전 중에서 육상발전보다 여러 가지 이점이 있는 한국형 해상풍력터빈 블레이드의 최적형상설계를 위한 알고리즘을 구현하는 것이다. 블레이드 단면 익형의 양력과 항력 분포는 XFOIL을 이용하여 예측하였다. 첫 번째 수준의 설계변수인 각각의 블레이드 지름과 축 회전수에서 익형의 공력변수들과 최소에너지손실 조건을 이용하여 두 번째 설계변수인 각 블레이드 단면에서의 시위길이와 피치각 분포를 최적화하였다. 그리고 성능결과를 바탕으로 반응면을 구성하고, 확률적 방법을 이용하여 타당성 있는 설계공간까지 첫 번째 설계변수를 이동시키고 구배최적화 기법을 통해 각각의 제약함수를 만족하면서 목적함수를 죄대로 하는 최적블레이드 형상을 구현하였다. 설계된 최적형상에 대해 탈설계점 해석을 수행하여 성능을 구하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.21-30
• /
• 2001

The analysis system implementing a serial process from structural vibration to sound radiation has been developed using both the power flow finite element method (PFFEM) known as a new vibrational analysis technique in medium to high frequency ranges and the acoustic boundary element method (BEM) which is effective in analyzing the sound radiation problems. The vibration analysis for arbitrary shape structures composed of plates is performed, and using the vibration energy density obtained from this analysis as the velocity boundary conditions for an acoustic analysis, vibro-acoustic analysis has been processed. To verify the developed system, we select a simple structure model and compare the results of developed system with those of SYSNOISE, and also the developed system is applied for the vibro-acoustic analysis of various structures in shapes.