• Title/Summary/Keyword: 순시선

Search Result 39, Processing Time 0.032 seconds

대순진리회 구천상제(九天上帝) 신앙과 도교 보화천존(普化天尊) 신앙 비교

  • 위꿔칭
    • Journal of the Daesoon Academy of Sciences
    • /
    • v.21
    • /
    • pp.157-195
    • /
    • 2013
  • 대순진리회는 '구천응원뇌성보화천존강성상제(이하 '구천상제')'를 주신(主神)으로 신앙하는 종교단체이다. 그렇다면 대순진리회의 '구천상제'와 중국 도교에서 모셔지는 '구천응원뇌성보화천존'(이하 '보화천존')은 어떤 연관성이 있는 것인가? 이런 질문을 토대로 본 글에서는 이 신들의 기원과 칭호, 도세법문(度世法門 : 세상을 제도하고자 펼친 법도) 등의 관점에서 그 차이점과 공통점을 하나씩 비교해 보았다. 먼저 기원이라는 측면에서 '구천상제'와 '보화천존'을 비교해보면, '구천상제'는 천지인 삼계의 최고신으로서 강씨 가문을 선택하여 인간의 육신으로 태어났다. 강씨 성은 상고 신농씨에서 시작되었는데, 고대 문헌에 근거하면 신농씨는 태양신, 남쪽, 불(火) 등으로 상징화된다. 이런 상징들은 '구천상제'가 인간으로 태어날 때 나타난 "하늘이 남북으로 갈라지다", "큰 불덩이가 몸을 덮치다", "천지가 밝아지는도다" 등의 현상들에서 찾아볼 수 있다. 도교의 '보화천존'은 뇌신의 특징을 가지면서 일신(日神), 월신(月神)과 관계를 맺고 있는데, 이런 면들은 신농씨로부터 분석한 '구천상제'의 신적 기원과 일치하고 있다. 또한 도교에서는 신농씨가 다스리던 세상을 중국 상고시대의 가장 이상적인 사회형태로 보고 있는데, 이것을 '구천상제'가 건설하려는 후천선경과 연관 지어 생각해보면 '구천상제'가 신농씨의 후손인 강씨 종가에서 태어난 배경을 이해할 수 있다. 도교의 '보화천존' 역시 중생의 이익을 도모하고, 조화로운 인간세상을 만드는 것을 목표로 삼고 있으며, 이것은 대순진리회 '구천상제'가 행한 대순의 목적과 거의 비슷하다고 볼 수 있다. 다음으로 '구천상제'와 '보화천존'은 칭호에서도 공통점과 차이점을 살펴볼 수 있다. 단적으로 말하자면, '구천상제'에는 '보화천존'에 비해 '강성상제'라는 칭호가 추가되어 있다는 것이다. 또한 도교에서는 '보화천존'을 최고신으로 모시지 않으며, '구천상제' 신앙에서는 '보화천존' 신앙에서와 달리 뇌신과의 관계에 대한 설명을 찾아볼 수 없다. 마지막으로 '구천상제'와 '보화천존'의 도세법문을 비교해보면 첫째, 구천상제는 세상이 혼란, 불공평, 죄악에 빠졌기에 육신으로 인간 세상에 강림한 후 대순진리를 선포하였다. 이와 유사하게 보화천존도 천하와 인간세상을 순시하여 죄악과 겁액을 없앤다는 '순시천하(巡視天下)' 사상이 있다. 물론 여기에는 차이점이 존재하는데, 그 중 하나는 '보화천존'은 순시할 때 인간의 육신으로 화하지 않았다는 점이다. 또 다른 하나는 '보화천존'이 인간 세상에 창교의 방법을 통하여 선경을 건설하고자 하는 목표를 전해주지 않았다는 점이다. '보화천존'은 교리를 가르치거나 신통을 발휘하는 데에만 중점을 두고 있다. 둘째, '구천상제'가 내린 가르침인 해원상생은 후천선경을 건설하기 위한 수단과 과정이다. 도교의 '보화천존'도 인간이 지은 많은 죄악과 겁액은 세상 사람들이 맺은 원한과 관계가 있으므로, 이런 겁액과 죄를 해소하려면 해원부터 해야 한다는 것을 수차례에 걸쳐 언급하고 있다. 도교에서 말하는 '해원'의 구체적인 내용은 주로 인간의 시비, 질병, 겁액에 관한 것이며, 그 해결 방법으로는 주로 마음속으로 『옥추보경』을 읽는 것이다. 이를 '구천상제'의 '해원상생' 가르침과 비교하면 그 사상의 폭이나 깊이, 중요성, 이론적 측면 등에서 비교적 간단한 형태로서 체계적인 면모로까지 나아가지는 못하였다. 셋째, '구천상제' 는 곤경에 처한 사람이 신명의 호칭을 부르면 그에 상응하는 신명이 달려와서 구원해준다는 '소리감응' 방법을 사용하고 있는데, 이 방법은 도교의 '보화천존' 역시 사용하고 있는 것이다. 넷째, '구천상제'는 과오를 범한 사람이 자신의 과오를 뉘우치면, 그 다음에 상제의 용서를 받음으로써 그 원한이 풀리게 된다는 참법(懺法 : 懺悔法)을 세인(世人) 교화에 자주 사용하였다. 물론 이것은 해원상생의 구체적인 적용이라 할 수 있다. 기능면에서 보면 이 방법은 『구천응원뇌성보화천존옥추보참(九天應元雷聲普化天尊玉樞寶懺)』의 참의(懺儀)와 공통되는 점이 있다. 참의는 수도자 스스로 자신의 잘못을 뉘우치고, 수도에 정진하며, 사회의 안정을 도모하고, 포덕에 힘쓰고, 악을 물리치고 선을 널리 펼친다는 것인데, 이런 의미에서 양자는 일치한다고 생각된다. 필자가 생각하건대, 대순진리회의 '구천응원뇌성보화천존강성상제'와 도교의 '구천응원뇌성보화천존' 사이에는 공통점이 아주 많지만 동시에 차이점 또한 적지 않다. 만약 더욱 다양한 자료들을 수집하여 더욱 깊고 광범위한 연구를 진행한다면 한국 대순진리회와 중국 도교, 특히 도교의 뇌법종파(雷法宗派)와의 상관관계를 해석하는 데 큰 도움이 될 것이라 생각한다.

A Study on the Design of Digital Frequency Discriminator with 3-Channel Delay Lines (3채널 지연선을 가진 디지털주파수판별기의 설계에 관한 연구)

  • Kim, Seung-Woo;Choi, Jae-In;Chin, Hui-cheol
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.6
    • /
    • pp.44-52
    • /
    • 2017
  • In this paper, we propose a DFD (Digital Frequency Discriminator) design that has better frequency discrimination and a smaller size. Electronic warfare equipment can analyze different types of radar signal such as those based on Frequency, Pulse Width, Time Of Arrival, Pulse Amplitude, Angle Of Arrival and Modulation On Pulse. In order for electronic warfare equipment to analyze radar signals with a narrow pulse width (less than 100ns), they need to have a special receiver structure called IFM (Instantaneous Frequency Measurement). The DFD (Digital Frequency Discriminator) is usually used for the IFM. Because the existing DFDs are composed of separate circuit devices, they are bulky, heavy, and expensive. To remedy these shortcomings, we use a three delay line ($1{\lambda}$, $4{\lambda}$, $16{\lambda}$) in the DFD, instead of the four delay line ($1{\lambda}$, $4{\lambda}$, $16{\lambda}$, $64{\lambda}$) generally used in the existing DFDs, and apply the microwave integrated circuit method. To enhance the frequency discrimination, we detect the pulse amplitude and perform temperature correction. The proposed DFD has a frequency discrimination error of less than 1.5MHz, affording it better performance than imported DFDs.

A Analysis on the Result of CE/CS Test on the KOMPSAT-I ETB (아리랑1호 위성 ETB의 전도성 전자파 환경 시험결과 분석)

  • 임성빈;천용식
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.12 no.2
    • /
    • pp.184-192
    • /
    • 2001
  • In this paper, we analyze the result of the conduced emission and susceptibility tests performed on the KOMPSAT-I ETB Platform. The ETB platform consists of the EM (Engineering Model) boxes developed to perform the electrical functional test. During the conducted emission test, we measured the instant waveform in time domain when each switch was turn on, and spectrum of the noise in the frequency range of 10 Hz up to100 MHz fur the steady state of the ETB. During the conducted susceptibility test, no malfunction and no serious damage of the electronic box were observed when a simulated noise waveform was applied to the DC power bus. The simulated waveform was obtained by adding the 6 dB-system margin to the worst case waveform measured from the conducted emission. This test was performed as co-development of the KOMPSAT-I with TRW in USA.

  • PDF

Calculation of the Harmonic Emission Limit for low-Voltage Electrical Equipment (국내 저압 전기기기의 고조파 유출 제한값 산정)

  • Kang, Moon-Ho;Song, Yang-Hoi;Lee, Heung-Ho
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.22 no.10
    • /
    • pp.56-61
    • /
    • 2008
  • Because the harmonic disturbance characteristic which makes voltage drop and the deterioration of instantaneous power quality in electrical power system overheats the NGR and the customer capacitor and malfunctions the OCGR and AMR, it is necessary for electric power company to take active measures to reduce this disturbance. International Electrotechnical Commission(IEC) 61000-3-2 specifies limits for harmonic current emissions generated by low voltage(LV) electrical equipment whose input current $\leq$ 16(A) per phase. Analysis shows that limits for Class A equipment in IEC are calculated using the reference impedance of LV system and maximum permissible voltage and limits for other Classes are also calculated based on limits for Class A. Therefore we have calculated four(4) internal limits for LV electrical equipment using the korea reference impedance and maximum permissible voltage in this paper.

Design of the Robust Active Power Filter under the Unbalanced and Distorted Source Voltages in Three-phase Four-wire Systems (전원전압의 불평형 및 왜곡에 강인한 3상 4선식 전력용 능동 필터의 설계)

  • Min Joon-Ki;Kim HyoSung;Choi Jaeho;Kim Kyung-Hwan
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.9 no.5
    • /
    • pp.420-429
    • /
    • 2004
  • This paper proposes a novel current control strategy on active power filters using PQR instantaneous power theory which can compensate the line current harmonics and the neutral line current under the unbalanced and/or distorted source conditions in three-phase four-wire systems. The characteristics of the inverter ac filters are analyzed and a novel digital controller are proposed to overcome the inherent time delay problem in digital controllers with designed control gain in this paper. The proposed current control method is based on a sinusoidal PWM for fully-digital implementation compared with a conventional hysteresis PWM. PSiM simulation results verify the good performance of the proposed current control strategy on shunt type APFs.

A Study on the Application of the DVR in AC Electric Traction System (전기철도계통에 순간전압강하 보상장치 적용에 관한 연구)

  • 최준호;김태수;김재철;문승일;남해곤;정일엽;박성우
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.17 no.6
    • /
    • pp.95-104
    • /
    • 2003
  • The electric traction systems are quite differ from general power systems which is single-phase and heavy load. Therefore, there are inevitably power quality problems such as steady state or transient voltage drop, voltage imbalance and harmonic distortion. Among these problems, since steady-state volatge drop is the one of most important factor in electric power quality, many researches about on the compensation of volatge drop by using SVC(Static Var Compensator) and/or STACOM(Static Compensator) have been studied and proposed Also, it is expected that transient voltage drop(voltage sag) could affect the control and safety of high speed traction load. In this paper, voltage sag compensation of AT(Auto Transformer) feeding system are studied The detailed transient models of utility source, scott transformer, AT, and traction load are estabilished. The application of DVR(Dynamic Voltage Restorer) in electric traction system is proposed to compensate the voltage sag of traction network which is occured by the fault of utility source. It can be shown that application of the DVR in electric traction system is very useful to compensate the volatge sag from the result of related simulation works.

Laser-based THz Time-Domain Spectroscopy and Imaging Technology (레이저 기반 테라헤르츠 시간영역 분광 및 영상 기술)

  • Kang, Kwang-Yong;Kwon, Bong-Joon;Paek, Mun Cheol;Kang, Kyeong Kon;Cho, Suyoung;Kim, Jangsun;Lee, Senung-Churl;Lee, Dae-sung
    • Journal of Sensor Science and Technology
    • /
    • v.27 no.5
    • /
    • pp.317-327
    • /
    • 2018
  • Terahertz (THz) time-domain spectroscopy(TDS), imaging techniques, and related systems have become mature technologies, widely used in many universities and research laboratories. However, the development of creative technologies still requires improved THz application systems. A few key points are discussed, including the innovative advances of mode-locking energy-emitting semiconductor lasers and better photoconductive semiconductor quantum structures. To realize a compact, low cost, and high performance THz system, it is essential that THz spectroscopy and imaging technologies are better characterized by semiconductor and nano-devices, both static and time-resolved. We introduce the THz spectroscopy and imaging systems, the OSCAT(Optical Sampling by laser CAvity Tuning) system and the ASOPS(ASynchronous Optical Sampling) system, are constructed by our research team. We report on the THz images obtained from their use.

C00rdinated Testing between transformer Tap Selection and Inverter Voilage Control in the PV Distributed Generation system (태양광 분산 발전 시스템의 계통연계용 변압기탭 선정과 인버터전압조정 협조시험)

  • Yoon, kap koo;CHO, SeongSoo
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.1098-1099
    • /
    • 2015
  • ${\bullet}$ 시험대상: 영월태양광 4,990kW(998kW ${\times}$ 5호) ${\bullet}$ 13.07.31 연계기술검토의뢰 ${\bullet}$ 13.08.28 한전검토결과: 인근변전소 영월S/S(40MW) 초과로 10.8km 지점의 평창 D/L 평창간 347호 주진S/S에 다음의 보완대책과 연계 권고 ${\cdot}$ 문제점: 적정전압이탈 및 순시전압변동률 유지불가 ${\cdot}$ 연계기준만족을 위해 한전에서 제시한 보완대책 : 계통용량증설(설비보강), 연계용량 감소 및 전용선로 연계 ${\bullet}$ 14.01.09 분산형설치자의 용역사(에이스기술단)에서 송배전용전기설비 이용규정과 연계기준 만족을 위한 보완대책 제안 ${\cdot}$ 태양광발전시스템 인버터 자동전압(역률/무효전력) 조정기능 및 감시설비 구비 ${\cdot}$ 최적 공통연결점 선정: 분산형전원으로 부터 전기적으로 가장 가까운 영월D/L 영월S/S측에 개폐장치설치 하고 주진S/S 측으로 연계 ${\bullet}$ 14.01.29~06.19 한전(전력연구원)의 유효성 검토 ${\cdot}$ 보완대책 기술적 유효(실증시험 시행 후 시행공문 발송 예정) ${\bullet}$ 14.08.08 송배전용전기설비 이용규정 개정에 따른 협의 ${\cdot}$ 변압기 대당 20MW에서 25MW ${\cdot}$ 변전소 전체 60MW에서 75MW까지 허용 ${\cdot}$ 영월 S/S 측 문곡/영월 D/L 연계 공사 협의 ${\bullet}$ 14.10.04 사용전검사, 한전계통연계운전 시작 ${\bullet}$ 인버터 고정역률(99.9~100%) 운전 시험 ${\cdot}$ 14.11.21 22.9kV 계전기(SEL-751) 5대, 15분 간격 자료저장 ${\cdot}$ SEL-751/USB to RS232C/노트북 15분간격 측정(첨부) ${\bullet}$ 14.03.07 인버터 역률 95.0% 조정 15분간격 측정(첨부) ${\bullet}$ 변압기탭 선정과 인버터전압조정협조시험 계획 ${\cdot}$ 변압기탭을 현장에서 상하 1탭씩 변경 ${\cdot}$ 인버터역률을 인버터공급사에서 원격조정 ${\cdot}$ 22.9kV 보호계전기 SEL-751, 15분 간격 측정 ${\cdot}$ 인버터 370V 계전기 K-PAM DG3000/현장감시설비 연계 ${\cdot}$ 15분 간격 측정 저장 ${\cdot}$ 현장감시설비/인터넷 연결 원격측정(첨부예정)

  • PDF

Strategic Elements Project of Japan (일본의 원소전략 프로젝트)

  • Choi, Pan-Kyu
    • Journal of the Korean Magnetics Society
    • /
    • v.24 no.6
    • /
    • pp.197-201
    • /
    • 2014
  • As the importance of rare metal is increasing globally, Japan introduced the concept of Strategic Elements in 2004, and started Strategic Elements Project in 2007. The Goal of this project run by MEXT (Ministry of Education, Culture, Sports, Science and Technology) is to develop high-function materials and components that do not use rare or harmful elements by studying the role and characteristics of the elements that compose materials and components and decide their functions and characteristics. In September 2010, Japanese coast guard arrested a Chinese fishing boat near Senkaku Islands (Diaoyudao Islands by China), which escalated to the territory issue and eventually a big diplomatic and economic conflict. In order to put pressure on Japanese Government, China used an economic option, which is the ban of rare earth export to Japan. This incident doubled Japan's motivation to develop Strategic Elements and put more efforts into this Project. MEXT set the following three research areas in February 2012: Study of alternative materials using sufficient and harmless elements, Study of applications for the high-functions of Strategic Elements, Study of practical design for components using Strategic Elements. Through a course of gathering the opinion of professionals, MEXT settled down with the following 4 research and study areas for the Strategic Elements Project in June 2012. 1. Magnetic materials to replace Dy, Nd. 2. Catalyst/Battery materials to replace Pt, Rh/Li, Co. 3. Electronic materials to replace In, Ta. 4. Structural materials to replace Nb, Mo. This paper deals with the first area and reviews the results of the research and study as of now.