• Fire Science and Engineering
• /
• v.16 no.2
• /
• pp.38-42
• /
• 2002

This experiment is to understand a characteristics of smoke layer formation affected periodicity of fire plumes. The ON-OFF jet was used to constitute the oscillating flow, which was formed by a mixture of nitrogen gas with kerosene particles. The instantaneous images was obtained by digital video camera using laser sheet technique. The results were confirmed that the smoke layer in the near fire source comprise vortices which are formed by impingement from the periodicity of fire plume. The periodic impinging of plumes were thickened the smoke layer and produced the back-flow.

• Journal of Energy Engineering
• /
• v.3 no.1
• /
• pp.54-61
• /
• 1994

계단형태의 고온발생장치로서, 고온의 흐름을 형성하고 난류유동이 없이 일정한 혼합기류를 만들 수 있는 2단격막구조 충격파관 장치를 이용하여, 혼합을 동반하지 않는 분무의 착화과정에 관한 실험을 수행하였다. 본 실험에서는 충격파관 속에 하향으로 설치된 초음파 분무기에 의해 자유낙하 상태에 있는 예혼합 분무주를 만들어서 반사충격파에 의해 순간적으로 단열압축시켜서 착화 현상을 관찰하였다. 고온영역과 저온영역에서 얻어진 활성화에너지는 큰 차이가 나며 본 연구에서 얻은 착화지연의 실험결과는 통상의 분무착화 실험인 전기로법, 급속압축기법, 고온기류속에 연료를 분사하는 방법과 다른 현상을 보였다. 그 대표적인 결과에 대한 예로는 착화지연에 대한 압력 의존성과 연료분사율의 영향이 일반적인 분무의 결과에 비해 적게 나타났다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.967-970
• /
• 2011

본 논문에서는 커널 모드에서 악성 봇이 호스트를 전염 시키는 순간 나타나는 일반적인 행동 특성들을 기반으로 효과적인 악성 봇 탐지가 가능한 프로그램을 구현하였다. 구현된 프로그램은 false-positive(오탐지)를 줄이기 위해서 악성 봇의 전염 과정에서 발생하는 복제 행동, 레지스트리 등록, uninstall 등록, 복제된 파일의 경로 정보 그리고 사용할 API 임포트 정보 등과 같은 악성 행위 탐지 기준 6가지를 고려한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.1-7
• /
• 2012

DDoS attack is a malicious attempt to exhaust resources of target system and network capacities using lots of distributed zombi systems. DDoS attack introduced in early 2000 has being evolved over time and presented in a various form of attacks. This paper proposes a scheme to detect DDoS attacks and to reduce possibility of such attacks that are especially based on vulnerabilities presented by using control packets of existing network protocols. To cope with DDoS attacks, the proposed scheme utilizes a buffer management techniques commonly used for congestion control in Internet. Our scheme is not intended to detect DDoS attacks perfectly but to minimize possibility of overloading of internal system and to mitigate possibility of attacks by discarding control packets at the time of detecting DDoS attacks. In addition, the detection module of our scheme can adapt dynamically to instantly increasing traffic unlike previously proposed schemes.

• Journal of Korea Water Resources Association
• /
• v.43 no.1
• /
• pp.1-13
• /
• 2010

For the first time, this study identifies Nash model parameters by GIUH theory based on grid of GIS with heterogeneity of drainage path. Identified parameters have advantages to improve accuracy and usefulness with considering hillslpoe-flow, geomorphological dispersion and easily extracting geomorphological factors by GIS in the watershed. Calculated results by identified parameters compare with observation data for verification of this model. The comparison is well correspondence between observed data and calculated results. And the comparison results of changing trends about lag time and the variance as hillslope and channel characteristic velocities sensitively present changes about hillslope characteristic velocity. Thus this model justifies that estimation of hillslope characteristic velocity demands with the great caution.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.203-212
• /
• 2008

The purpose of this study is to propose appropriate model for 3 staged Didimsae movement to Jajinmori rhythm and to provide information for ideal foot step movements. For the locational change of body center, the height of body center is lowered at the moment of forward step and during forward intersection of the feet, forward direction linear motion is converted to vertical motion to maintain stability. Speed change of body center reduces flow of body on step forward moment and controls rapid forward movement for stabled movement and position when preventing fast forward horizontal direction movement of centroid speed while knee joint and foot joint are vertically risen for heel bone contacts the ground. For angle changes of joints, in order to prevent hyperextension of lower leg, hip joint is extended and knee joint is curved to secure stability of movement for smooth curves and extension. When centroid of foot joint is moved from top of the feet to whole foot sole and when left foot makes dorsal curve, stabled movement is accomplished.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.6
• /
• pp.9-21
• /
• 2001

This paper defines the mobility and rotatability, and a desired mobility and rotatability that can be achieved by adjusting the distance between two wheels of a mobile robot dynamically. The radii of wheels are assumed to be constant in this paper. If a mobile robot has a fixed axis connecting the two wheels, it may not be able to avoid a sudden obstacle because of the constraint of mobility and rotatability. The focus of this paper is on the instant rotatability with high and stable mobility. That is, by dynamically changing the distance between the two wheels, the mobile robot could get the high rotatability instantly and high mobility with high stability. Supposed that the mobility and rotatability that are defined in this paper are supplied to the design of a mobile robot, it will suggest a theoretical basis on the optimal design of the mobile robot with a given route condition and its states. The experimental data support the validity of the aforementioned mobility and rotatability.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.1
• /
• pp.10-20
• /
• 2014

To study the water-entry impact noise, on-board experiment using a small launcher firing various objects was performed in the Yellow Sea. As the launcher fires a cylindrical object from the ship vertically, generated noise is measured with a hydrophone on the starboard of Chung-hae, Marine surveyor. Three types of cylindrical objects, which have noses of flat-faced, conical, and hemisphere, were used during the experiment. The measured noise exhibits a time-dependency which can be divided into three phases: (1) initial impact phase, (2) open cavity flow phase, (3) cavity collapse and bubble oscillation phase. In most cases, the waveform of bubble oscillation phase is dominant rather than that of initial impact phase. Pinch-off time, where a cavity begins to collapse, occurs at 0.18 ~ 0.2 second and the average lasting time of bubble was 0.9 ~ 1.3 second. The energy of water-entry impact noise is focused in the frequency region lower than 100 Hz, and the generated noise is influenced by the nose shapes, object mass, and launching velocity. As a result, energy spectral density on the bubble frequency is higher in the order of flat-faced, conical, hemisphere nose, and the increase of initial energy raises the energy spectral density on the bubble frequency in the cylinder body of same shape. Finally, we compare the measurements with the simulated signals and spectrum based on the bubble explosion physics, and obtain satisfactory agreements between them.

• Korean Journal of Food Science and Technology
• /
• v.24 no.2
• /
• pp.165-170
• /
• 1992

The creep behavior of gels made with $30{\sim}45%$ gelatinized rice starch was measured over a wide range of temperature. Compressive creep curves of rice starch gels conformed to a six element mechanical model consisting of one Hookean, two Voigt and one Newtonian component. The creep compliance of gels decreased with increasing starch concentrations. Among viscoelastic constants of the mechanical model, elastic modulus was mainly influenced by the change of starch concentrations. The concentration-invariant compliance curve was obtained by reduction to 38% using reduction parameter $a_{c}$. The creep compliance curves of 45% starch gels increased with temperature, which indicated that rice starch gels became softer and less rigid with increasing temperature. When the compliance at $20^{\circ}C$ was set as a reference curve, creep compliance data for 45% gels at various temperature could be superimposed as a continuous smooth curve. The apparent activation energies of 45% rice starch gels calculated by the modified WLF equation were not intrinsic, but decreased as temperature increased.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.82-90
• /
• 2000

An experimental study has been carried out at circulating water channel to investigate the non-breaking and breaking waves generated by a submerged circular cylinder steadily moving under the free surface. Free surface profiles and pressure distributions on cylinder surface were measured at various submerged depths of cylinder. They were complemented by the measurements of velocities, head losses and turbulence intensities in the wakes of body and "breaker". Part 1 of this three-part paper describes the experimental arrangement and the patterns of wave profile and pressure distribution at various depths of submergence. These databank contributions are of special interest in traditional ship hydrodynamics. In Part 2, special focuses are made to elucidate the viscous and turbulent aspects of flow field. Finally Part 3 will deal with the visualization of instantaneous vortical flow to study the mutual interaction between vorticies shedded from the free-surface and the cylinder using a Particle Image Velocimetry.