• 한국식품영양과학회지
• /
• 제22권2호
• /
• pp.181-185
• /
• 1993

동부앙금(6~9%)을 연속가열법과 순간가열법으로 각 온도(80, 85, 90, 95$^{\circ}C$)에 도달시키고 20분간 유지시킨 다음 호화액의 흐름성질을 회전점도계를 이용하여 회전속도 6~180rpm, 측정온도 6$0^{\circ}C$의 조건에서 분석하였다. 호화액은 항복응력을 가진 의가소성 유체의 성질을 보였고 각 전단속도에서의 전단응력값은 순간 가열호화액이 연속가열호화액 보다 컸다. 순간 가열호화액은 농도와 가열온도에 관계없이 연속 가열호화액보다 항복응력과 점조도 지수값이 컸고 흐름지수 값은 작았다. 점조도 지수의 대수값은 농도와 가열온도와 정의 상관관계 (p<0.05)를 보였다. 동일한 농도에서 순간 가열호화액은 연속 가열호화액보다 가열온도에 따른 점조도 지수의 대수값의 증가 속도가 컸다.

• 대한기계학회논문집B
• /
• 제21권11호
• /
• pp.1475-1484
• /
• 1997

A new empirical formula for instantaneous heat transfer coefficients was determined. The determination of this formula is in need for prediction of instantaneous value of heat transfer coefficients to analyze in more detail the time variation of heat transfer rate from gas to wall in combustion chamber of a spark ignition engine. As the result, following formula was determined. h=687 $p^{0.75}$ $U^{0.75}$ $D^{0.25}$ - $T^{-0.465}$ U(.theta.)=O.494 $V_{p}$ +0.73*10$^{6}$ (1.35 p dV/d.theta.+V dp/d.theta.) Using this empirical formula, the instantaneous heat transfer coefficients of gas in the combustion chamber of spark ignition engine was predicted and compared with experimental values.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.395-402
• /
• 2001

The gasoline engine tends to high performance, fuel economy, small-sized. Therefore, it is necessary to solve the problems on thermal load, abnormal combustion, etc, in the engine, Thine film instantaneous temperature measurement probe was made. And the manufactural method of probe was established. The instantaneous surface temperatures in the constant volume combustion chamber were measured by this probe and the heat flux was obtained by Fourier analysis. The authors measured the wall temperature of combustion chamber and computed the heat flux through the cylinder wall in order to understand the combustion characteristics depending on height of probe. For achieving this goal, the thin film instantaneous temperature probe was developed for analyzing the instantaneous surface wall temperature and unsteady heat flux on the constant volume combustion chamber.

• 한국자동차공학회논문집
• /
• 제9권4호
• /
• pp.103-111
• /
• 2001

In the present study, the internal combustion engine tends to high performance, fuel economy, small-sized. Therefore, it is necessary to solve the problems on thermal load, abnormal combustion, etc in the engine. Thin film instantaneous temperature probe was made, and the measuring system was established. The instantaneous surface temperatures in the constant volume combustion chamber were measured with this system and the heat flux was obtained by Fourier analysis. Maximum instantaneous temperatures were obtained after 55∼60ms from ignition and they increased as equivalence ratio and varied differently as the position of probe. Total heat loss during combustion time was affected by the equivalence ratio and differed widely as the position of probe.

• 한국자동차공학회논문집
• /
• 제8권3호
• /
• pp.1-11
• /
• 2000

Instantaneous temperature probes were manufactured by pressing method. By using these probes, the instantaneous surface temperature and unsteady heat flux in the cylinder liner of DOHC engine were measured. The main results are as follows; ⅰ) the instantaneous surface temperature of cylinder liner are affected by the contact of piston ring as well as burning gas. ⅱ) the wall temperature of the siamese portion is much higher than other parts. ⅲ) it was shown that the rising trend of heat flux by burning gas are nearly limited to the 1/2-stroke distance from the top of cylinder liner.

• 한국자동차공학회논문집
• /
• 제5권5호
• /
• pp.178-187
• /
• 1997

For the experimental measurement of heat flux of DI diesel engine combustion chamber, the instantaneous temperature probes and data acquisition system were developed. By the analysis of measured temperatures at the cylinder head, the temperature at the point 3 which is located between intake and exhaust valve was higher than that of the other points. Temperatures at the point located mear the exhaust valve were higher than those of intake valve. The instantaneous and mean temperature at the cylinder head increases proportionally to the increase of the engine speed, while the temperature swing varies inversely. Temperature swings have influence on the maximum heat flux values from gas into head surface. It has been verified that these probes and data acquisition system perform well by the comparison of the trend of instantaneous temperature variation with that of measured combustion chamber pressure variation with respect to crank angle. It is presumed that these probes could be used in the measurement of other parts of combustion chamber as piston, cylinder wall etc. for the future study.

• 한국광학회지
• /
• 제7권4호
• /
• pp.348-356
• /
• 1996

기체의 순간 온도를 측정할 수 있는 펄스 레이저를 사용한 이동형 CARS 분광기를 제작하였다. 이 분광기의 측정 프로그램은 측정한 스펙트럼으로 부터 온도를 얻기 위하여 8가지의 빠른 온도 계산법과 최소제곱법을 포함하고 있다. 빠른 온도 계산법 중 두 가지는 최소제곱법 보다 계산 시간은 훨씬 덜 걸리면서 온도의 분산이 작은 측정 결과를 준다. CARS 온도의 정밀 정확도는 복사온도계를 기준으로 흑연관 흑체로에서 측정하였다. 1000K부터 2400K의 온도 영역에서 정확도는 .+-.2% 이내이고 정밀도는 가장 정밀한 결과를 주는 빠른 온도 계산법을 적용할 때 1600K에서 .+-.35K이다. 순간 온도 측정의 적용 예를 보이기 위하여 이 분광기를 정해진 조건에 있는 난류 연소의 측정에 적용하였다.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1398-1407
• /
• 1992

본 연구에서는 정적연소기를 대상으로 하여 화염전파중의 열손실을 연소실내 의 압력 및 슐리렌 촬영한 화염사진에 의해 구한 발생열로부터 추정하는 방법을 제시 하고, 연소실 벽면의 순간온도를 직접 측정함으로써 상기방법에 의한 열손실 추정법의 타당성을 입증하였다. 그리고 이 열손실과 기연가스가 연소실 벽면에 접하는 열전달 면적과의 관계를 해석하므로서, 추후 열손실을 고려한 연소실 형상 설계에 있어서의 기초자료를 제시하고자 하였다.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.196-204
• /
• 1998

For the experimental measurement of instantaneous surface temperature of the piston of the DI mono cylinder diesel engine, the instantaneous temperature proves, data acquisition system, and grass-hopper type linkage system were developed. The instantaneous temperatures on the piston bowl, crown, lands and skirt were measured and analyzed, and the following conclusions were derived ; (i) The crank angle for the maximum instantaneous temperature during one cycle varies and moves back and forth by the measuring positions and engine speeds. (ii) The engine speeds, the positions of the measuring points and the cooling water temperature had an effect on the instantaneous temperature amplitude. (iii) The instantaneous temperature suing phenomena appeared on the temperature profiles of the piston crown, top and second land of ring, but on the temperature profiles of the parts of the third land of the fing and skirt, they didn't appear, (iv) The isothermal lines in the piston were acquired through the operation of the finite elements method using the measured temperatures as the boundary conditions.

• 한국정보통신학회논문지
• /
• 제17권1호
• /
• pp.255-261
• /
• 2013

이 논문에서는 화재와 관련된 전투 시스템의 취약성 및 생존성을 분석하기 위하여 전투 시스템의 순간 화재를 예측하고 관련 정보를 시각화해주는 프로그램의 개발 및 시험에 관한 내용을 다룬다. 화재의 특성에 관한 선행 연구를 기반으로 FTA 기법을 적용하여 치명 부품의 순간 화재 확률 트리를 도출하였다. 개발한 프로그램에서는 도출된 순간 화재 확률 트리를 이용하여 전투 시스템의 순간 화재 발생 확률을 계산한다. 또한 개발한 프로그램은 전투 시스템 모델에서의 치명 부품 위치, 관통 유/무, 순간 화재 확률 트리, 온도 분포를 비롯하여 외부 위협, 내장재, 연료의 물성 테이블과 같은 관련 정보를 표시해 주는 기능을 가진다.