• Journal of Korean Electronics
• /
• v.10 no.6
• /
• pp.32-36
• /
• 1990

EMI의 기술은 단시일내에 이룩되거나 외국으로부터의 기술도입 드응로 해결될 수도 없는 문제여서 국가적 지원과 관심은 물론 산업계에서도 꾸준한 기술개발 투자와 아울러 숙련된 기술자를 양성하여 EMI 기술 개발에 총력을 기울여야 할 것이다.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.2
• /
• pp.179-186
• /
• 2004

본 연구의 목적은 숙련된 골프선수들의 골프 스윙동작 시 상이한 무게중심 변환 형태가 존재하는지 그리고 만약 이 상이한 무게중심 변환 형태가 존재한다면 어떤 형태로 나타나는지를 알아보고자 하였다. 본 실험을 위해 13명의 남자 대학 엘리트 골프 선수들을 대상으로 드라이버를 이용한 스윙을 실시하게 하였다. 수직 지면 반력과 압력중심 이동 패턴을 측정하기 위해 지면반력기 2대와 스윙 동작 시 critical event 설정을 위해 1대의 고감도 비디오 카메라를 사용하였다. 또한 스윙 결과로 나타나는 비거리, 클럽헤드 속도를 측정하기 위해 스윙 분석기를 이용하였다. 피험자 간 상호 비교를 위해 측정된 수직 지면반력 성분은 몸무게를 이용하여 표준화하였고 압력중심은 어드레스시의 압력중심을 원점으로 재 계산하였다. 또한 임팩트 시 측정된 좌우 수직 지면반력 성분을 이용하여 두 가지의 상이한 스윙 스타일로 구분하였다. 연구결과 8명(62%)의 피험자에게서 좌측 수직력 성분이 상대적으로 높은 전족(FFS) 스타일임이 밝혀졌고 5명(38%)은 그 반대인 리버스(RFS) 스타일임이 밝혀졌다. 이 전족 스타일은 대부분의 골퍼들이 선호하고 또 그렇게 하여야만 한다고 믿고 있는 스윙방식이다. 이와 반대인 리버스 스타일은 코치들이 금기시 하는 스윙의 형태로서 초보자, 즉 비숙련 자에게만 나타나는 전형적인 스윙형태라고 인지되고 있다. 하지만 이 두 가지 스윙 스타일이 초보자가 아닌 숙련된 골프 선수들에게서도 실제 존재한다는 것이 본 실험 결과로 나타났다. 평균 압력중심 이동 패턴은 전후축 방향의 경우 RFS 스타일 그룹이 RFS 스타일 그룹에 비해 압력중심 이동이 크게 나타났고 좌우축의 경우에도 RFS 그룹이 FFS 그룹에 비해 압력중심 이동이 크게 나타났다. 특히 임팩트 시 압력중심의 위치가 FFS 그룹은 전족 근처에 있는 반면 RFS 그룹은 후족(rear foot)에 위치하여 두 스윙 스타일의 차이점을 분명하게 보여주었다. 따라서 비록 이 RFS 스타일이 대부분의 코칭 이론과는 상반되는 무게중심 이동 패턴을 보여주었지만 이 스윙 스타일이 잘못된 것이 아닌 실제 존재하는 하나의 스윙 스타일로 인식하여 스윙 지도 시 이에 알맞은 적절한 교습법을 마련해야 할 것이다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.443-454
• /
• 2008

Statement of problem: A clinically successful color match is one of the important factor to get an esthetic dental restoration. Dental shade guides are commonly used to evaluate tooth color in restorative procedure. But numerous reports have indicated that common shade guides do not provide sufficient spectral coverage of the natural tooth colors. To address issues associated with the shade guide, distinct avenues have been pursued objective spectrophotometric / colorimetric assessment. Purpose: This study compared the accuracy of tooth color selection of spectrophotometer with that of human visual determination. Three main factors were investigated, namely, the effect of light, the individual variation and the experience of the observer. Material and methods: At the first experiment, on ten patients, one operator independently selected the best matching shade to the unrestored maxillary central incisor, using a Vita Classical Shade Guide in the morning, at noon and in the afternoon. The same teeth were measured by means of a reflectance spectrophotometer. At the second experiment, on ten patients, ten operators (5 experts, 5 novices) selected and measured by the same method above at noon. At the third experiment, the results of the second experiment were divided into two groups, expert and novice, and analyzed. Results: 1. There was significant difference between visual and spectrophotometric assessment (mean ${\Delta}E$ values) in experiment 1, 2, 3 (P < .05). 2. There was no significant difference between experts and novices group, when comparing with each visual and spectrophotometric assessment (mean ${\Delta}E$ values). Conclusion: Spectrophotometer could be used to analyze the shade of natural tooth objectively. Thereby, this method offers the potential tominimize considerably the need for corrections or even remakesafter intraoral try-in of restoration. Furthermore, to achieve its advantage, both the shade-matching environment and communication between dentist and technician should be optimized with use of visual and instrumental shade-matching systems.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.796-801
• /
• 2002

최근의 소프트웨어 개발은 객체지향 프로그램 개발 기법을 사용하여 소프트웨어를 개발하고 있다. 초보 개발자에게는 적절한 객체를 식별하고 정확한 속성과 행위를 부여하는 객체 지향 기법은 상당히 힘든 문제이다. 객체의 집합, 즉 클래스 모델링 기법에도 재사용 기법을 사용한다면 이미 작성된 모델을 참조하여 객체 지향 개발 기법을 처음 접하는 초보 개발자에게는 학습의 기회를 제공하고, 숙련된 개발자에게는 검증된 모델을 통해 모델링 실패를 방지할 수 있는 안전성을 제공할 수 있다. 본 논문에서는 유사성(Similarity) 측정 기법을 적용하여 클래스간의 유사도를 판단하고, 관계 일치여부를 분석하여, 재사용 가능한 클래스를 검색하는 모델을 제안한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.437-439
• /
• 2016

절단을 위해 한번 자를 때 끝까지 잘라야만 하는 길로틴 절단 시에, 작업자가 잘라야 하는 조각 배치를 생각하면서 작업을 해야 한다. 이때, 어떤 식으로 배치해야 할 것인 가에 대해 생각하는 시간이 많이 들고, 최적의 배치를 만들어 내는데 한계가 있어 낭비되는 조각들이 생겨난다. 이러한 문제를 해결하기위해 조각 배치를 프로그램으로 구현하였고, 철판절단 숙련 작업자와 비교하여 보았다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.131-136
• /
• 2016

An appropriate evaluation on learner's pronunciation has been an important part of foreign language education. The learners should be evaluated and receive proper feedback for pronunciation improvement. Due to the cost and consistency problem of human evaluation, automatic pronunciation evaluation system has been studied. The most of the current automatic evaluation systems utilizes underlying Automatic Speech Recognition (ASR) technology. We suggest in this work to evaluate learner's pronunciation accuracy and fluency in word-level using the ASR and non-native teacher's speech model. Through the performance evaluation on our system, we confirm the overall evaluation result of pronunciation accuracy and fluency actually represents the learner's English skill level quite accurately.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.5
• /
• pp.1011-1018
• /
• 1997

Background : To evaluate how efficaciously and safely we can make transthoracic lung biopsy with an 18-gauge automated biopsy device. Methods : We performed 130 transthoracic needle biopsies including 16 repeat biopsies in 114 patients with a pulmonary mass using an l8-gauge biopsy device (ASAP 18, Microvasive-. Eighty-three biopsies were performed by an experienced radiologist and 47 by several less experienced radiologists. All biopsies were guided by biplane fluoroscopy. Results : We successfully obtained sufficient tissue(>2-mm in the length) in 128(985) of 130 biopsies. Biopsy provided the specific diagnosis in 97 (85%) of 114 patients including 78 (88%) of 89 patients with a malignant tumor and 19 (90%) of 21 patients with a benign condition. The diagnosis could not be made in the remaining four patients. Of interest to note was the superb capability (74/74) of biopsy to make a distinction between small cell carcinoma and non-small cell carcinoma. There was no significant difference in the diagnostic yields between the experienced and less experienced radiologists. Of the total 130 biopsies, pneumothorax appeared in 13 (10%), among which treatment was required in 2 (2%), Mild, self-limiting hemoptysis was nod in seven (5%), but in no case was the treatment required. Conclusion : We conclude transthoracic lung biopsy with an 18-gauge automated device is an effective procedure for the specific diagnosis of benign and malignant lung disease. It is safe with the complication rate comparable to that of fine-needle aspiration biopsy as well.

• Korean small business review
• /
• v.41 no.3
• /
• pp.107-128
• /
• 2019

The Employment Permit System (EPS), a system of bringing in low-skilled foreign workers, has been implemented since 2004 to relieve labor shortages in SMEs. Despite the increasing number of foreign workers under this system, due to lack of research we have very limited managerial understanding. Moreover, previous studies focused on economic or legal perspectives, which calls for a different perspective of business and management. In this study, we examined how to foster organizational citizenship behaviors (OCB) of low-skilled immigrant workers at the workplace by integrating two analytical frames-social support from management studies and cultural adjustment from immigrant literature. We tested our model using a sample of 661 immigrant workers from 11 countries working in Korea. Our results indicated that, social support perception triggered not only a direct effect on organizational citizenship behaviors of immigrant workers but also indirect effects via the level of cultural adaptation. Our findings indicated that two views are all meaningful in explaining OCB of immigrants, and provided practical implications to SMEs using EPS.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.4
• /
• pp.275-281
• /
• 2014

The purpose of this study was development and evaluation of putting training system with specialized guides which were adjustable its width and changeable its distance from the ball. The system hardwares that used in this study were made by LEGO NXT and Tetrix set. The system software was made by LabVIEW ver. 2010. The subjects were organized in non-experts(10persons) and KPGA(5persons) players. The putting training schedule was composed of 10 sets and each sets were identically same, which were organized in 4 different width of its guide at 3 different distance from the ball hitting spot, 3 repetition each. The speed/acceleration in wrist area and movement in head area were both reduced by the putting training. Most of testees submitted positive comments in aspect of concentration and motivation. This training method which had changeable width and distance will be able to adapt easily to another sports for the handicapped and the elderly such as ParkGolf or Gateball.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.31-49
• /
• 2005

The purpose of this study was to analyze the weight transfer patterns under the different golf swing types which are full swing control swing and putting stroke. Two women golfers participated in this study, one(165cm, 94.3kg)being classified as a low-handicap(LH)player, the other(165cm, 54.5kg) being classified as a high-handicap(HH) player. Both players are right-handed. Two force plates(Kistler, 9286AA) were synchronized with a motion capture system(Qualisys ProReflex MCU240). Anteriorposterior, mediolateral, and vertical forces were used as an indicator of the pattern of swing. Four discrete positions which are address, top of backswing impact, and finish were identified as an event and three phases which are backswing downswing, and follow-through between he events were also identified. The results showed that, at impact, the total force was 1.24BW ring the full swing 1.17BW during the control stroke, 1.00BW during the putting stroke. Depending on the golf swing types, the differences are existed. At impact, the distribution of forces is different with a low-handicap(LH) player and a high-handicap(HH) player. A LH player has 26% in right foot and 74% in left foot during the full swing 49% in right foot and 51% in left foot during the control swing 49% in right foot and 51% in left foot during the putting stroke. A HH, on the other hand, has 74% in right foot and 26% in left foot during the full swing 62% in right foot and 38% in left foot during the control swing 54% in right foot and 46% in left foot during the putting stroke. From address to top of backswing the amount of vertical forces are changed 43:57(right foot: left foot) to 76:24 during the full swing 47:53(right foot: left foot) to 75:25 during the control swing 50:50(right foot: left foot) to 54:46 during the putting stroke. The biggest weight transfer pattern took place in full swing and the control swing is next, and the putting stroke is the final.