• The Journal of Korean Obstetrics and Gynecology
• /
• v.28 no.2
• /
• pp.193-203
• /
• 2015

Objectives : The purpose of this study is to evaluate the clinical effects of ascending kidney water and descending heart fire pharmacopuncture treatment for hot flush and sweating. Methods : Ascending kidney water and descending heart fire pharmacopuncture is achieved by injecting pharmacopuncture on a specific acupoint to change from the state of water-fire disharmony to harmonious state. Hwangryunhaedok-tang (黃連解毒湯) pharmacopuncture is injected on both side Gyeonjeong (GB ₂₁ ), Pungji (GB ₂₀ ). Total 0.4 cc was injected by 0.1 cc each point. BUM (Bear’s gall bladder, ox bezoar and musk) pharmacopuncture is injected on both side Jeonjung (CV ₁₇ ), Jungwan (CV ₁₂ ), Gihae (CV ₆ ). Total 0.15 cc was injected by 0.05 cc each point. Treatment was done daily. The method of evaluation are Hot Flush Score (HFS), VAS and sweating areas. Results : In case 1, after treatment hot flush score was reduced from 24 to 4 points. VAS scale was reduced from 7 to 2. It took about two weeks for the symptoms to decrease by half. Associated symptoms almost did not stay at discharge. In case 2, after treatment hot flush score was reduced from 28 to 2 points. VAS scale was reduced from 10 to 3. And emotional symptoms were reduced about 70%. In case 3, after treatment hot flush score was reduced from 8 to 1 points. VAS scale was reduced from 6 to 1. And headache and chest discomfort symptoms have disappeared. Conclusions : Ascending kidney water and descending heart fire pharmacopuncture treatment is effective for improve ascending kidney water and descending heart fire energy. Therefore, it will be used to alleviate hot flush and sweating.

• Journal of the Korean Chemical Society
• /
• v.47 no.1
• /
• pp.59-66
• /
• 2003

The comb-type grafted polymer hydrogels, which composed of N-isopropylacrylamide monomer and oligo(N-isopropylacrylamide-co-tert-butylacrylamide) [oligo(NIPAAm-co-t-BAM)], were synthesized by redox polymerization in 5~10% methanol aqueous solution using ammonium peroxodisulfate (APS) at 4 oC for 24h. The lower critical solution temperatures (LCSTs) of the comb-type grafted hydrogels were decreased with increase of t-BAM content in the grafted copolymer. We observed the effect of crosslinker and concentration of oligo(NIPAAm-co-t-BAM) on the shrinking/swelling ratio of hydrogels. Changes of shrinking/swelling ratio were decreased with increase of concentration of crosslinker. The increase of grafted oligo(NIPAAm-co-t-BAM) in the hydrogel shows an fast changes of shrinking/ swelling rate. The comb-type grafted hydrogels are expected to be valuable for the sensing materials of time-temperature labels(TTLs).

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.6
• /
• pp.164-172
• /
• 2008

The heat of hydration for early aged mass concrete induces high temperature with the hydration. Control of the temperature difference across a section is an effective strategy to minimize the hydration heat induced cracks for the structures where internal restraint is dominant. The current prevention methods for hydration cracking show some limitations for the control of thermal gradients, and these limitations could make micro and macro cracks in surface and core of concrete. Especially cooling methods can decrease the increasing hydration temperature, but it can not prevent the problem while decreasing temperature. Consequently heating pipes are added simultaneously with the cooling pipes in order to control the temperature gradients between core and surface of the concrete, followed by the finite element analysis (FEA). Based on the FEA, the proposed method using cooling pipe and heating pipes together has been found to be an effective alternative in thermal gradient control, in terms of controlling temperature induced cracks significantly.

• Journal of Pharmacopuncture
• /
• v.10 no.3
• /
• pp.149-155
• /
• 2007

Objectives The purpose of this study is aimed at diagnosing and suggesting treatment plans for commonly seen clinical manifestation of heat symptom in the upper body and coldness in the lower body, also known as hot above, cold below syndrome. Methods Various reasons attribute to the presence of hot above, cold below syndrome, but mainly contributed by blockage of normal Qi flow by abnormality of heart-kidney root, spleen-stomach axis, and liver-lung axis. Diagnosing these abnormalities and timely alleviation to the healthy state is presented in the study. Results 1For heat in the upper body, Huang Lian Jie Du Tang(黃連解毒湯), CF, or JsD pharmacopuctures are injected on GB21, GB20. Qi stagnation in the thoracic area is treated with BUM injection on CV17. For impairment of transportation and transformation in the middle energizer, BUM pharmacopuncture is injected on CV12. Coldness in the lower energizer was relieved by bee venom or Sweet BV(Bee Venom free from enzymes) on CV6. Conclusion Above proposed methods of regulating water-fire were effective in treating hot above, cold below syndrome in clinical manifestations. But once the symptom subsides, treatment focused on eliminating innate cause should be rendered to achieve more successful results.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.155-158
• /
• 1995

150~7,000Hzd의 확대역 전화를 위한 전화 전송특성 설계지침으로 활용하기 위해, 확대역과 300~3400Hz 의 협대역 전화에 대한 통화품질 평가결과를 비교/분석하였다. 토화품질 평가는, 조정법에 의한 선호 라우드니스 레벨고 ㅏ동가 라우드니스 레벨 조정실험, 그리고 단음절 명료도평가로 구성되었다. 선호 라우드니스 레벨 조정실험의 결과, 협대역과 확대역 음성에 대한 피험자의 선호레벨이 각각 70.7dB 및 68.6dB로 약 2dB의 차이를, 피험자간 분산은 2.12와 6.11로 의미있는 차이를 보였는데, 이것은 음성대역의 확장에 따라 사용자들의분산이 크기 때문에 확대역 전화에서 수화음량 조절기능이 필요함을 증명한 결과이다. 그리고, 협/확대역 조건에서의 100개 단음절에 대한 명료도 실험 결과에서, 전체 명료도 점수간에는 통계적으로 의미있는 차이를 보이지 않았지만 단음절중 3,400Hz이상에서 많은 에너지를 갖는, 파열음 'ㅌ', 파찰음 'ㅈ', 'ㅉ', 'ㅊ', 그리고 마찰음 'ㅅ', 'ㅆ' 으로 시작하는 20개 단음절에 대한 부분명료도에 있어서 협대역과 확대역 조건간에 20%의 명료도 차이를 나타내었다. 또한, 비교 라우드니스 레벨 조정실험의 결과, 협대역과 확대역 사이의 평균 라우드니스 레벨 차이가 약 3.4dB (A)로 나타났는데, 이 결과는 국내 확대역 전화의 수화음량적격 설정에 지침으로 활용할 것이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.185-185
• /
• 2012

중공 발광 나노 물질은 특유의 구조적 특성(낮은 밀도, 높은 비표면적, 다공성 물질, 낮은 열팽창계수 등)과 광학적 성질을 이용하여 디스플레이 패널, 광결정, 약물전달체, 바이오 이미징 라벨 등의 다양한 적용이 가능하다. 이러한 적용에 있어 균일한 크기와 형태의 중공 입자는 필수 조건으로 여겨진다. 지금까지 합성된 중공 발광 입자에는 BaMgAl10O17 : Eu2+-Nd3+, Gd2O3 : Eu3+, $EuPO_4{\cdot}H_2O$과 같은 것들이 있으나 크기 조절이 어렵고, 그 균일성이 확보되지 못하였다. 균일한 크기의 중공 발광 입자를 만들기 위해 SiO2나 emulsion을 템플릿으로 이용하여 황화카드뮴, 카드뮴 셀레나이드 중공 입자를 합성한 예가 있으나, 양자점의 독성으로 인하여 바이오분야 응용에는 적합하지 않다. YAG는 모체로써 형광체에서 가장 많이 이용되는 물질로, 화학적 안정성과 낮은 독성, 높은 양자 효율 등 많은 장점을 갖고 있다. 특히 세륨이 도핑된 YAG형광체의 경우 WLED, 신틸레이터, 바이오산업에 적용이 가능하다. 그러나 지금까지 중공 YAG:Ce3+형광체를 합성한 예가 없었다. 본 연구에서는 단분산 수화 알루미늄 (Al(OH)3) 입자 위에 세륨이 도핑 된 이트륨 베이직 카보네이트 ($Y(OH)CO_3$)를 균일하게 코팅한 후 열처리를 하여 균일한 크기의 Y3Al5O12:Ce3+(YAG) 중공 입자를 합성하였다. 열처리 온도에 따른 고분해능 투과 전자 현미경(HRTEM), X-선 회절(XRD), 고분해능 에너지 분광법(HREDX) 분석결과, 중공 YAG: Ce3+입자는 Kirkendall 효과에 의해 형성됨을 확인하였다. 전계방사형 주사 전자 현미경(FE-SEM) 측정을 통해, 열처리 후에도 입자의 크기와 형태가 균일함을 확인하였으며, 공초점 현미경 관찰을 통해 중공 형태를 명확히 확인 할 수 있었다. Photoluminescence (PL) 분광법과 형광 수명 이미징 현미경(FLIM)을 이용한 광 특성 분석결과, 합성된 입자는 400-500 nm에서 흡수 파장 (456 nm에서 최대 강도)과 500-700 nm 범위의 발광 파장(544 nm에서 최대 강도)을 나타냈고, 상용 YAG: Ce3+(70 ns)에 준하는 74 ns의 잔광 시간(decay time)이 측정되었다. 단분산 수화 알루미늄 입자의 크기를 조절하여 최종 합성된 YAG: Ce3+의 크기를 조절할 수 있었다. 지름 약 600 nm의 Al(OH)3를 사용한 경우, $1,300^{\circ}C$에서 열처리를 한 후 평균 지름 590 nm의 중공입자를 합성하였고, 약 170 nm의 Al(OH)3를 이용하여, 더 낮은 온도인 $1,100^{\circ}C$에서의 열처리를 통해 평균지름 140 nm의 중공 YAG: Ce3+입자를 합성하였다. 본 연구를 통하여 합성된 균일한 크기의 YAG 중공입자는 LED와 같은 광전변환 소자 및 다기능성 바이오 이미징 등의 나노바이오 소자 분야에 활용될 수 있음이 기대된다.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.36-41
• /
• 2002

This study was carried out develope a ultrasonic transducer displacement generator through 26KHz and 38KHz of the frequency phase modulation on the ultrasonic transducer. This system was producted a power output generation such as 100W, 300W, 400W and 600W. Ultrasonic power output had a change of time. We made use of a Thiram hydration and detected it measurement by the ACAO method. It was to decide the result of ultrasonic power supply for time duration and the result of comparison in the 26KHz & 38KHz by UV/VIS spectrophotometer.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.1
• /
• pp.51-62
• /
• 2009

This study was carried out development a new composting system to lower copper and zinc concentration in plg sludge compost and conduct an inquiry into the possibility of crop cultivation. The concentrations of nitrogen, phosphorus and pH averaged 4.4%, 6.3% and 7.57, respectively, which were higher concentrations than in commercial organic fertilizers, and the concentrations of copper and zinc averaged 805 and 1,704 mg/kg, respectively, which were beyond the heavy metal concentration limit in byproduct compost. Hydrated citric acid I lowered the concentrations of copper and zinc by 58% and 97%, respectively and hydrated oxalic acid II lowered the concentrations of copper and zinc by 48% and 56%, respectively in pig sludge compost. Lower concentrations of copper and zinc in pig sludge resulted from the enhanced hydrated-citric acid concentration in organic acid solution mixed with distilled water. The concentrations of copper and zinc were 330, and 41 mg/kg in the pig sludge treated with 100% hydrated citric acid. Agitation composting system stabilized the compost earlier than the stationary composting system, in which the stabilization condition was confirmed by higher temperature by $4^{\circ}C$ at highest temperature and 7 days earlier cooling down after highest temperature. The levels of germination index (G.I) 80 were obtained 15 and 20 days after composting in agitation and stationary composting system, respectively. The concentrations of copper and zinc were 2.4 and 4.26 mg/kg respectively in soils amended with pig sludge compost after removing process of heavy metals by citric acid, but 8.0 and 22.37 mg/kg, respectively in soils amended with Pig Sludge. The concentrations of heavy metals was highest in com cultivated in soils amended with pig sludge. The copper and zinc concentrations In corn leaves were 75.2 and 50.56 mg/kg respectively, which were 4 and 2 fold higher than the com cultivated in soils amended with pig sludge compost after heavy metal removing process by hydrated citric acid.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.61-61
• /
• 2003

Aquaporins (AQPs)는 다양한 상피세포와 내피세포에 존재하며 다량의 물 수송을 촉진하는 막성단백질로 현재 11개의 AQP가 (AQP0-10) 발견되었으나, 아직 생리적, 기능적 분석은 불충분한 상태이다. 생쥐의 자궁내막은 발정주기 동안 호르몬의 자극에 따라 부풀어오르거나 수축하는 변화를 보이며 에스트로젠과 몇몇 혈관에 작용하는 매개체에 의해 자궁 혈관의 투수성이 증가한다는 보고는 있으나, 자궁액의 수송 메커니즘에 대해서는 뚜렷하게 밝혀진 바가 없다. 발정기의 생쥐 자궁은 자궁내막세포의 증식과 함께 수화되는 특징을 보이며 자궁내강으로 물이 수송되어 luminal fluid의 점성이 낮아지는 현상이 나타나는데, 이 때 AQP가 water channel로서 중요한 역할을 할 것으로 보고 본 실험에서는 면역조직화학법(immunohistochemistry)과 역전사중합효소연쇄반응(Reverse-transcriptase polymerase chain reaction)을 통해 발정기 자궁의 수화와 AQP 발현의 상관성에 대해 알아보고자 하였다. 면역조직화학법의 결과 발정주기의 다른 시기에 비해 발정기(estrus phase)에 자궁상피세포에 AQP4, 5, 8 protein이 다량 존재하는 것으로 밝혀졌고, 근육층(myometrium)에서의 발현은 발정주기 동안 차이가 없었다. Whole uterus로 RT-PCR을 수행한 결과 AQP4, 5, 8 mRNA는 luteal phase에 비해 follicular phase에 더 많이 발현하는 것으로 확인되었다. 또한 LCM(Laser Capture Microdissection) system을 이용하여 luminal epithelium과 stromal cell을 분리하여 RT-PCR을 수행한 결과 AQP4, 5, 8 mRNA는 stromal cell 보다는 luminal epithelium에 더 많이 발현하며, 이 역시 follicular phase에 발현량이 증가함을 확인하였다. 이러한 결과로 미루어 생쥐 자궁에서 AQP4, 5, 8은 발정주기 내막에 발현이 증가하며 이는 자궁내강 안으로 수분을 수송하는데 주요한 기작으로 사료되며 estrogen에 의한 조절 가능성을 암시한다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.415-420
• /
• 2013

A method for coating rice with a novel substance, SHC [soybean hydrolysate with Cyclo Histidine-Proline (CHP)], was developed to produce functional rice for food production. The dip coating and spray coating method was tested to reduce the loss of functionality during the manufacturing of enriched rice. The dip coating method showed a very low absorption rate ($0.079min^{-1}$) of the functional substance compared to control ($0.150min^{-1}$), while the spray-coating method with protective coating materials [a methyl cellulose solution (l%, w/v) containing 5% (w/v) of the SHC] showed relatively adequate absorption characteristics. A light yellowish stain was observed in the rice samples processed by the spray-coating method (b value; surface1 0.69, flour 4.91) compared to raw rice (b value; surface 9.67, flour 4.86). The microscopic appearance of whole kernels and longitudinal sections revealed that cracks formed in all rice samples, regardless of the coating method. In conclusion, spray coating is a potential method for producing SHC-fortified rice with excellent physical characteristics.