• Journal of the Korean Geotechnical Society
• /
• v.39 no.9
• /
• pp.13-24
• /
• 2023

To investigate the stability of temporary retaining walls during excavation, it is essential to develop reverse analysis technologies capable of precisely evaluating the properties of the ground and a learning model that can assess stability by analyzing real-time data. In this study, we targeted excavation sites where the C.I.P method was applied. We developed a Deep Neural Network (DNN) model capable of evaluating the stability of the retaining wall, and estimated the physical properties of the ground being excavated using a Differential Evolution Algorithm. We performed reverse analysis on a model composed of a two-layer ground for the applicability analysis of the Differential Evolution Algorithm. The results from this analysis allowed us to predict the properties of the ground, such as the elastic modulus, cohesion, and internal friction angle, with an accuracy of 97%. We analyzed 30,000 cases to construct the training data for the DNN model. We proposed stability evaluation grades for each assessment factor, including anchor axial force, uneven subsidence, wall displacement, and structural stability of the wall, and trained the data based on these factors. The application analysis of the trained DNN model showed that the model could predict the stability of the retaining wall with an average accuracy of over 94%, considering factors such as the axial force of the anchor, uneven subsidence, displacement of the wall, and structural stability of the wall.

• Clean Technology
• /
• v.12 no.1
• /
• pp.45-51
• /
• 2006

Colloidal Liquid Aphrons(CLAs) were prepared from different solvents such as nonpolar hydrocarbons, alcohols, and amines. Water-soluble surfactant and oil-soluble surfactant were used in this study. The effect of PVR (phase volume ratio) and concentration of extractant on the stability of CLA was investigated. The stability of CLA was affected by PVR. As PVR was increased, the stability of CLA was decreased.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.667-667
• /
• 2012

호안블록을 설치하는 목적은 제방의 비탈면 및 저수로 하안을 강수나 유수에 의한 침식작용으로부터 보호하는데 있다. 근래에 들어서는 친수성, 경관, 생태계 보전 및 재생 등과 같은 기능을 가진 다양한 호안블록의 시공이 이루어지고 있는데 이러한 국내 상황은 호안블록에 관한 수리적 연구와 안정성 검토의 필요성을 증가시키고 있다. 현재 국내에서는 호안의 설계 및 시공시에는 하천공사 표준시방서 등을 이용하고 호안블록 제작에는 콘크리트 표준 시방서 등을 이용하고 있다. 그리고 이런 시방서의 내용들은 호안블록 설치 후 호안의 안정성을 보장하는 듯 하다. 하지만 이는 모두 호안블록의 재료 및 설치 기준에 관한 지침서일 뿐이며, 어느것도 호안블록 설치 이후에 호안의 안정성을 보장하지는 않는다. 따라서 현재 국내 상황을 고려한 호안블록 주변의 수리특성에 관한 연구와 안정성 평가 기법의 개발은 매우 시급한 과제이다. 본 연구에서는 한국건설기술연구원 안동 하천실험센터 실규모 수로에 최근 미국과 일본에서 적용하고 있는 호안블록의 안정성 평가 지침을 참고하여 호안블록 시험구간을 설치한 뒤, 서로 다른 형태의 호안블록 두 종류에 대하여 실험을 수행하였다. 실험에 사용된 호안블록은 실재 현장에서 사용되는 블록과 동일한 제품을 사용하였다. 실험 결과 두 종류의 호안블록에서 모두 기반 토층의 침하 현상이 발견되었으며, 그 중에서 블록 중앙에 구멍이 있는 형태의 호안블록의 경우에는 구멍 내부에서 발생한 강한 세굴 현상이 침하로 이어져 결국에는 호안블록이 설치된 구간 전체가 파손되는 양상을 보였다. 또한 유속이 빠른 구간에서 블록의 파손이 더 심화되는 양상도 확인하였다.

• Journal of Aerospace System Engineering
• /
• v.11 no.4
• /
• pp.44-47
• /
• 2017

This work dealt with vibration stability analysis of automotive exhaust sensor. In this work, structural design and analysis of exhaust gas sensor of automobile system were performed. Firstly, structural design requirement of automobile exhaust system was investigated. After structural design, the structural analysis of the exhaust measurement sensor system were performed usig the finite element analysis method. It was performed that the vibration and thermal stress analysis at the high temperature condition. After structural test of target structure, structural test results were compared with analysis results. Through the structural analysis, it was confirmed that the designed measurement sensor structure is safety.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.3
• /
• pp.142-151
• /
• 2004

A method for the determination of concrete armor unit weights with hydraulic stability and structural stability may be formulated in this paper. The hydraulic stability is analyzed by using Hudson's formula, the structural stability is also studied by evaluation of maximum flexural tensile stresses in armor unit induced by the impact loads and by comparison of those with the tensile resistance strength directly. The applicable criteria for concrete armor units can be represented as a function of design wave heights with return period, armor weights, and tensile strengths for the practical uses. In addition, reliability analyses for two failure modes are carried out to take into account some uncertainties. Finally, a series system for two-failure mode analysis can be made up straightforwardly, by which the optimal weights of armor units can be estimated with the various relative breakages, given the specific target probability of failure under the concepts of reliability-based design method.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.9
• /
• pp.13-21
• /
• 2015

Recently, land subsidence and sinkhole are generated due to a change in the groundwater level in the city. For this reason, the necessity for management of stable underground water level is on the rise. In this study, it was conducted for the underground structure that passes through the lower of bus transfer center construction site to examine the influence on the stability for underground structures to changes in the groundwater level and effective stress, the coupled finite element analysis and structural analyses were performed to evaluate stability for underground structure. It is to secure stability for underground structures according to underground water level declines. In this way, effective construction management will be made by previewing and forecasting the influence on the ground behavior and adjacent structures due to changes in the groundwater level.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.1078-1081
• /
• 2011

친환경적 전기자동차에 대한 관심이 커짐에 따라 전력의 효율적인 저장과 관리를 위한 대용량 배터리에 대한 연구가 활발히 진행 중이다. 배터리 용량의 극대화, 안정성, 그리고 수명 등을 위한 다양한 셀 밸런싱 방법들이 소개되고 있다. 기존 패시브 셀 밸런싱 방법은 하드웨어의 기능을 수행하는 것에 초점을 맞추어 배터리 상태에 따라 다양한 반응을 정의하기 어려움으로 효과적인 운용에 한계가 있다. 본 논문에서는 소프트웨어 에이전트 모델을 적용한 배터리 셀 밸런싱 시스템을 제안하며 에이전트가 현재 전압과 온도를 고려한 셀 밸런싱을 수행함으로 고속 충전시에 발생하는 셀간 전압차를 최소화 한다. 또한 충전의 신속성과 셀 전압 안정성을 유지한다. 현재 연구 개발 중인 카이스트 온라인 전기자동차에서 사용 예정인 배터리 관리시스템 기반 시뮬레이션을 수행함으로 제안하는 방법의 유용성을 입증하였다.

• Economic and Environmental Geology
• /
• v.47 no.2
• /
• pp.121-131
• /
• 2014

The stability of rock slope is mainly controlled by the orientation and shear strength of discontinuties in rock mass. Therefore, in kinematic analysis, the orientation of the combination of discontinuities and slope face is examined to determine if certain modes of failure can be occurred. In previous kinematic analysis, a representative orientation of the slope face and mean orientation of discontinuity set were used as input parameters. However, since the orientations of slope face varies according to locations of measurement, the representative slope face orientation could cause misunderstanding for kinematic instability. In addition, since the orientations of each discontinuity are scattered in the same discontinuity set, there is the possibility that uncertainties are involved in the procedure of kinematic analysis. Therefore, in this study, the detailed digital topographic map was used to obtain the orientation of slope face. In addition, the probabilistic analysis approach was utilized to deal properly with the uncertainties in discontinuity orientation. The proposed approach was applied to steep slopes in mountain road located in Baehuryeong, Chunncheon city, Gangwon-Do. The analysis results obtained from the deterministic and probabilistic analysis were compared to check the feasibility of proposed the analysis.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.4
• /
• pp.143-147
• /
• 2021

The purpose of this study is to investigate how the application of a Thorax belt affects the stability of the spine in subjects with a wide infra-sternal angle. A total of 15 subject with wide infra-sternal angle participated in the experiment. Active Double leg lowering and active one-leg raising were performed with or without a thorax belt. Two spinal stability tests (active double lowering and active one-leg raising) performed with or without thorax belt application showed significant differences between each condition. Based on the results of present study, the application of a thorax belt is considered to be an effective therapeutic tool that can stabilize the spine to subjects with abnormally increased chest cage and spinal or trunk instability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.10
• /
• pp.973-978
• /
• 2010

In this paper, we studied the shimmy phenomena of an aircraft nose landing gear considering free-play. Shimmy is a self-excited vibration in lateral and torsional directions of a landing gear during either the take-off or landing. This phenomena is caused by a couple of conditions such as low torsional stiffness of the strut, friction and free-play in the gear, wheel imbalance, or worn parts, and it may make an aircraft unstable. Free-play non-linearity is linearized by the described function for a stability analysis in a frequency domain, and time marching is performed using the fourth-order Runge-Kutta method. We performed the numerical simulation of the nose landing gear shimmy and investigated its linear and nonlinear characteristics. From the numerical results, we found limit-cycle-oscillations at the speed under linear shimmy speed for the case considering free-play and it can be concluded that the shimmy stability can be decreased by free-play.