• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.29-33
• /
• 2007

All pixels of image sensor do not react uniformly even if the light of same radiance enters into the camera. This non-uniformity comes from the sensor pixel non-uniformity and non-uniformity induced by the changing transmission of the telescope over the field. The first contribution to the non-uniformity has high spatial frequency nature and has an influence on the result and quality of the data compression. The second source of non-uniformity has low frequency nature and has no influence of the compression result. As the contribution resulting from the sensor PRNU(Photo Response Non-Uniformity) is corrected inside the camera electronics, the effect of the remaining non-uniformity to the compression result will be negligible. The non-uniformity correction result shall have big difference according to the sensor modeling and the calculation method to get correction coefficient. Usually, the sensor can be modeled with one dimensional coefficients which are a gain and a offset for each pixel. Only two measurements are necessary theoretically to get coefficients. However, these are not the optimized value over the whole illumination level. This paper proposes the algorithm to calculate the optimized non-uniformity correction coefficients over whole illumination radiance. The proposed algorithm uses several measurements and the least square method to get the optimum coefficients. The proposed algorithm is verified using the own camera electronics including sensor, electrical test equipment and optical test equipment such as the integrating sphere.

• Journal of The Korean Association For Science Education
• /
• v.36 no.5
• /
• pp.717-727
• /
• 2016

Using TIMSS survey data, we analyzed whether there were any significant changes in the learning environment of middle school science classes over the last 10 years. Our study selected questions from teachers and school principals' questionnaires and divided them by category: science class, teacher professional development, and school environment. The science class components were subdivided into three categories: science learning activities, evaluation, and homework. Within teacher professional development, the sub-categories included teacher training, collaboration to improve teaching, and teacher evaluation. School environment subdivided into two aspects, these being school characteristics and school system. Our research confirmed that there has been a positive change overall in learning environments. However, most classes are teacher-conducted and also teacher-oriented; the proportion of science investigation activities has declined compared against the prior ten years. Our study show that students do not engage in a range of inquiry-related activities. The questions on tests and examinations involve mostly knowledge application and understanding, although recent methods of evaluation show improvement. As for the science teachers, they participate in many professional development programs but focus on science content, science curriculum, and pedagogy. In addition, teachers do not have many opportunities to participate in the training to integrate information technology into science, science assessment, or improving students' critical thinking or inquiry skills. The teachers are satisfied with their profession, and the shortage of science resources does not seem to affect instruction.

• Journal of the Korea Concrete Institute
• /
• v.25 no.2
• /
• pp.233-240
• /
• 2013

In this study, experimental research was carried out to evaluate and improve the seismic performance of high strength R/C interior beam-column joints regions using advanced reinforcing detailings and high ductile fiber-reinforced mortar. Five specimens of retrofitted the beam-column joint regions using advanced reinforcing detailings and high ductile fiber-reinforced mortar were constructed and tested for their retrofitring performances. Specimens designed by retrofitting the interior beam-column joint regions (IJIR series) of existing reinforced concrete building showed a stable mode of failure and an increase in load-carrying capacity. Specimens of IJIR series, designed by the retrofitting of advanced reinforcing detailings and high ductile fiber-reinforced mortar in reinforecd beam-column joint regions increased its maximum load carrying capacity by 114.2~123.5% and its energy dissipation capacity by 1.55~1.85 times in comparison with the standard specimen of SIJC with a displacement ductility of 5.

• Korean Journal of Child Education & Care
• /
• v.17 no.2
• /
• pp.181-203
• /
• 2017

The purpose of this research is to reveal the difference of teacher-child interaction in relation to professionalism awareness and sensitivity level of early childhood teachers. To this end, we used professionalism awareness, sensitivity, teacher-child interaction as parameters for 226 early childhood teachers in Jeonbuk province. Here are the results : First, we investigated the difference of professionalism awareness, sensitivity, teacher-child interaction in relation to the background of early childhood teachers, and it differs by the age, career, educational level of the teachers. Second, we made group comparison to see the difference of teacher-child interaction depending on professionalism awareness level of teachers, and teachers with high professionalism awareness showed meaningfully higher emotional, verbal, behavioral interaction level than lower group. Third, we made group comparison to see the difference of teacher-child interaction depending on sensitivity level, and teachers of high sensitivity shows meaningfully higher emotional, verbal interaction than lower group. This result could be potential data to ameliorate the quality of teacher-child interaction, and it implies that the improvement of professionalism and sensitivity level could contribute to professional performance capability of teachers.

• Journal of Science Education
• /
• v.35 no.1
• /
• pp.102-118
• /
• 2011

In this study the authors developed the practice-centered science camp program which was based on the review of out-of-school scientific activities and the standards of HASA (Hands, Head and Heart At Science Activity) curriculum emphasizing on hands-operated skills. After applying this science camp program we confirmed the validity of the program based on the students' responses at the camp. Using students' reports written during the camp and their essays written on the web-site after camp, we analyzed students' responses into four categories; knowledge, inquiry, hands-operated skills, and scientific attitudes. Also we evaluated the components of the science camp programs and students' perception of science and science-related attitudes using a questionnaire before and after the camp. In terms of contents and activities for the development and application of science camp, our result showed that the science camp program should be complemented to connect real life with high-tech science and include more activities related hands-operated skills and competition activities evoking constructive competitive spirits. In conclusion, we can infer that the agencies which take parts of the national policy enterprise related science education, such as Scientific Education Research Center, must develop and specialize science camp program with more competitive human resource system and economic support. Science educators should give more attention on joining school science education with out-of-school science education, which might have a positive effect on students' attitudes and participation toward science.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.942-954
• /
• 2007

The purpose of this research is to examine the level of SCM activity, marketing capability, and firm performance for apparel firms, and to investigate the effect of SCM activities and marketing capabilities for firm performance improvement. This study surveyed domestic apparel manufacturing brands that distribute products nationwide. The data was collected through questionnaires sent to managers or executives in large and middle manufacturing corporations among Korea's listed and registered corporations. The data collection has been carried out from November 10 until December 11, 2006. The questionnaires were transmitted by individual visit, fax, and mail. A total of 98 completed responses were returned, three incomplete responses were discarded. The results were as follows: First, SCM activity was classified into 3 dimensions: structural, logistical, and technological factor. Three dimensions of marketing capability were identified with differentiation, cost-leadership, and operational factor. Firm performance was classified into three dimensions: financial, productivity, and customer satisfaction factor. Second, result of analyzing effects of SCM activities for firm performance improvement, it was found that the improvement of technological activities affected acquirement of financial, productivity, and customer satisfaction performs. Structural activities affected factor of productivity performs. Third, result of analyzing effects of marketing capabilities for firm performance improvement, improvement of differentiation capabilities affected acquirement of financial, customer satisfaction performs. And the improvement of operational capability affected acquirement of financial performs and improvement of cost-leadership capability affected factor of productivity performs.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.282-288
• /
• 2002

본 연구는 상업용 규모의 쇄미선별공정에 사용할 수 있는 파이로트 규모 원통형 홈 선별기 시작기의 설계 및 제작에 필요한 기초 연구로서, 실험실용 원통형 홈 선별기를 이용하여 쇄미선별 실험을 실시하였다. 원통 회전속도, trough각도, indent 크기와 형상, 공급량을 요인으로 하여 완전립의 수거율과 순도, 쇄립의 수거율과 순도 및 선별효율을 조사하였다. 수행한 연구결과를 요약하면 다음과 같다. 1. 선별효율에 대한 원통 회전속도와 trough각도의 단독효과 및 교호작용은 1% 수준에서 유의성이 인정되었다. 원통 회전속도가 커지면trough각도 역시 그에 따라 적절히 증가시켜야만 선별효율의 저하가 방지되는 것으로 나타났다. 2. 최고 선별효율 값은 홈의 모양과 크기, 그리고 공급량에 관계없이 낮은 회전속도 (17rpm)와 중간 trough각도 (37.5$^{\circ}$또는 60$^{\circ}$)가 조합된 처리에서 나타났으며, 60~70% 범위의 높은 값을 보였다. 선별효율에 관한 원통 회전속도와 trough각도의 최적 조합은 17rpm, 37.5$^{\circ}$라고 판단된다. 3. 말발굽형 홈과 반구형 홈 간 선별효율의 차이는 없었다. 따라서, 실제 상업용 규모의 원통형 홈 쇄미선별기 개발에 있어서는 제작이 쉽고 유지.보수가 간편한 반구형 홈을 채택하는 것이 바람직할 것으로 생각된다. 길이 2.5mm이하의 미립인 쇄미의 선별에 사용할 홈의 크기는 2.5mm 보다는 약간 큰 3.0mm 정도가 되어야만 할 것으로 판단된다. 4. 공급량에 따른 선별효율의 차이는 1% 수준에서 유의성이 인정되었으며, 공급량이 작았을 때 전반적으로 선별효율이 높았다.타리 시프터를 채택, 사용하고 있었으며, 로타리시프터 사용상의 문제는 회전몸체를 지지하는 rod spring의 파손 등 구조와 관련된 것이었다. 로타리 시프터에 의한 쇄립의 선별과 제거정도는 만족할 만한 수준은 아니었다. 4. 국내 유통백미 완전립의 길이, 폭, 두께는 각각 5.02mm, 2.93mm, 2.03mm이었으며, 산물밀도와 천립중은 각각 745.3kg/m3 및 20.46g이었다. 5. RPC 백미제품의 품질경쟁력 향상을 유도하고자 현행 쇄미의 정의와 기준을 보다 강화하여 다음과 같은 쇄미 기준과 계급을 설정, 제시하였다. "완전립" - 길이가 3.75mm이상인 미립 "준완전립" - 길이가 2.5∼3.75mm인 미립 "쇄미" - 길이가 1.75∼2.5 mm인 미립 "이물" - 길이가 1.75mm이하인 미립.볼 때 상토 종자혼합비 6 : 1, 성형롤 회전속도 약 7 rpm으로 판단되며, 이 때 제조능력은 시간당 약 65 Kg(펠렛종자 약 39,000 개), 성형률 약 87 %, 종자손실률은 약 30 %, 펠렛종자 내 평균 종자수는 약 5.5 개, 완전 벼 종자 3개 이상 포함 펠렛종자 비율은 약 100 %가 될 것으로 보인다. 세포의 Androgen 생성을 촉진시키는 역할이 있는 것으로 보여진다 따라서 옻나무 유래 F는 포유동물의 생식기능에 중요하게 작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간

• Korean Journal of Animal Reproduction
• /
• v.26 no.2
• /
• pp.173-182
• /
• 2002

The mechanisms underlying of the visual assessment and resulting in optimum embryonic development following in vitro maturation, fertilization, and culture are unclear, It was known that in vitro produced embryos show more frequent occurrence of fragmentation, which resulted in poor developmental potential and decreased implantation rate. The objective of this study was to investigate the apoptotic rates in bovine blastocyst derived from in vitro fertilization (IVF) and nuclear transfer (NT). In addition, the expression levels of Bcl-2 and Bax gene were investigated in the blastocyst to confirm their potential roles in the regulation of apoptosis during preimplantation embryonic development. Analysis of apoptosis was carried out by using terminal deoxynucleotidyl transferase mediate dUTP nick end labeling (TUNEL) method. The levels of Bcl-2 and Bax gene in the blastocyst derived from IVF and NT were determined by RT-PCR. The proportion of TUNEL positive signal in blastocyst derived from NT was significantly higher than that in blastocyst derived from IVF (p<0.001). Bcl-2 expression level of blastocyst derived from IVF was higher than that of blstocyst derived from NT. However, high expression level of Bax was observed in the blastocyst derived from NT. These results indicates that apoptosis is more responsible for fiagmentation in bovine blastocyst derived from NT than IVF. These results suggested that the increase of developmental failure followed by NT could be caused by nuclear fragmentation as apoptosis.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.792-795
• /
• 2008

AGT system is a kind of light railway train. AGT system use of concrete track and rubber tire, so it can be reduce the noise and vibration, compare to the normal train system. And, the dynamic responses of normal bridge are influenced by the dynamic characteristics of bridge, the speed of vehicle and the surface roughness of railway. But the AGT system bridge is influenced not only the above facts but also the guiderail unevenness, because, AGT vehicle steered by guiderail. So, in this study, optimized service condition is suggested for the design and operation of AGT system, by the means of experimental study. The experiments are executed for PSC bridge with length of 30m, at the AGT test line in Kyongsan. The test results are compared and investigated according to the prominence. In the test result, the guiderail prominence influenced on the dynamic response of bridge. It shows a increase as compared with no guiderail prominence in the dynamic response value acceleration, displacement, stain.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1054-1060
• /
• 2013

Fuel tank of a rotorcraft has a great influence on the survivability of crews. For a long time, US army has tried to develop the proper material for fuel cell of a military rotorcraft. As a result, the design specification of fuel cell, MIL-T-27422A, was issued for the first time on 1961. Through a few revisions, it has been developed to ML-DTL-27422D in 2007. It should be assured that fuel cell satisfies the requirement defined in MIL-DTL-27422D. The qualification test of this specification is classified into Phase I test for material and Phase II for fuel cell itself. This paper studies test conditions and procedures of slosh & vibration, gunfire resistance and crash impact test. They are considered as the most important tests which have a high possibility of failure. The rational consideration of this paper can improve the ability for estimating not only the validity of test procedure and test condition but test result. Based on the rational consideration, it is expected that the ability of the systematic development can be improved.