• Nuclear Engineering and Technology
• /
• v.17 no.1
• /
• pp.25-33
• /
• 1985

The main purpose of this work is to investigate the effects of the wall thickness, the ultrasonic frequency, and the acoustic impedance of wall material on the liquid-film thickness measurement by an ultrasonic pulse echo method. A series of liquid-film thickness measurements in a horizontal air-water stratified system was performed employing a plate-type and a tube-type test sections. Measurements were repeated changing (1) the wall thickness of the test section and (2) the transducer frequency. Also, in an effort to improve the accuracy of the measurement and to exam me the effect of acoustic impedance of wall material on the measurement by an ultrasonic technique, two different stand-off rods, one made of stainless steel and the other polyacrylate, were used in the liquid-film thickness measurement. These experimental results are discussed and compared with the actual film thicknesses.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.278-278
• /
• 2019

본 연구의 목적은 수위조건에 따른 댐체의 방류능력을 검토하는 것이 주목적으로 수리모형실험을 통한 수위-유량곡선을 제시하고 이론식으로 도출된 방류량 산정값과의 결과를 검토하는 것이다. 원주천댐은 강원도 원주시 판부면 신촌리 일원에 설치되는 콘크리트 중력식 댐으로 댐길이는 210.0m 이며, 댐높이는 45.5m, 댐마루고는 EL. 239.0m 이다. 홍수시 방류설비로는 21m 길이의 무문식 2열 여수로로 이루어져 있다. 본 연구를 위해 제작된 원주천 댐모형은 수평축척(LH) 1/60, 연직축척(LV) 1/60, 왜곡도 1을 갖는 정상모형으로 제작되었다. 방류능 검토실험은 여수로의 방류량을 검토하는 것으로 수위와 방류량과의 관계를 계측을 통해 곡선으로 제시하는 것이다. 수위는 저수지 상류부 수위(원주천댐으로부터 150 m 상류지점)를 측정하여 수위별 방류량을 계측하였다. 유량의 경우 방류량값의 정확도 향상을 위해 관유량계와 삼각위어를 동시에 사용하여 측정하였다. 수리모형실험 결과 원주천댐의 수위-방류량 곡선은 그림 1과 같이 산출되었다. 이러한 결과를 토대로 원주천댐 설계시 사용되었던 자료를 비교하여 보았다. 원주천댐의 수위별 방류량은 미개척국(USBR)의 'Design of Small Dams'와 "댐 설계기준 해설(2011, 한국수자원학회)"에서 제시한 방법으로 방류량을 산정한 것으로 이들 두 자료를 비교한 자료는 그림 2와 같다. 실험결과 계산식과 수리모형실험을 통해 계측된 방류량은 큰 차이를 보이지 않는 것으로 나타났다. 이러한 결과로 보았을 때 계산식으로 산정된 수위-유량관계식은 충분히 댐운영에 적용할 수 있는 기초자료로 충분할 것으로 판단된다.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.498-509
• /
• 2021

The wake turbulence at the wingtip of preceding aircraft may affect the normal operation of following aircraft. Aircraft are classified into four categories according to their maximum take-off weight, and horizontal separation is applied with this category matrix. The FAA and EUROCONTROL revealed that the magnitude and effect of preceding aircraft wake turbulence were smaller than the current distance separation minima suggest. This new information presents the opportunity for revising wake turbulence minima into seven categories (RECAT). This paper confirms the feasibility of implementing RECAT at major airports in South Korea using the draft of ICAO Doc. 10122. The paper also calculates the ultimate runway capacity of Incheon International Airport in South Korea using the Harris Model and comparatively analyzes the amount of runway capacity. As a result of the analysis, it was confirmed that the implementation of RECAT could increase the ultimate runway capacity of Incheon International Airport. This paper's calculation methods and results can be used as primary data for implementing RECAT in other airports.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.15 no.2
• /
• pp.2949-2967
• /
• 1973

The purpose of this study is to find out and determine the minimum consumptive use of water for Korean cabbage and turmp, so that the minimum water requirement can be secured always for a stable cultivation of these vegetables regardless of weather conditions. The experiment was conducted in two periods; first one from May to July and second one from August to October, each experiment with two varieties of cabbage and two varieties of radish with 2 replicants and 15 treatments. The results found from the above are briefly as follows: 1. Since the mean soil moisture equivalent 64 days after the treatment was 28.5% and the soil moisture content at the time was 2.67% which is far less than that of the wilting point, the crop seemed to be extremely caused by a drought. 2. The rate of 51 days after the seeding, soil moisture content of plot No.2 where irrigation has been continuous was the highest or 21.3%, whereas the plot No.14 without irrigations was 11.2% and the lowest. Therefore, the soil moisture content for the minimum qrowth seemed to be 20%. 3. The consumptive coefficient of Blaney and Criddle on cabbage in two periods were K=1.14 and 0.97 respectively, and on radish in two periods were K=1.06 and 0.86 respectively, thus, cabbage was higher than radish. The consumptive coefficient in the first experiment (May-July) was 0.17 to 0.20 higher than the 2nd experiment(August-October). 4. Nomally, cabbage and radish germinate within one week, however, the germination ot these crops which were treated with a suspended water supply from the beginning took two full weeks. 5. When it elapsed 30 days after seeding, the conditions in plot 1,2 and 3 were fairly good however, the crops in the plops other than these showed a withering and the leaves were withered and changed into high green due to an extrem drought. Though it was about same at the beginning, the drought damage on cabbage was worse than that on radish period, and the reasos for this appears in the latter that the roots are grown too deep. 6. The cabbage showed a high affinity between treated plots and varieties. Consequently, it can be said that cabbage is very suseptive to drought damage, and the yield showed a difference of 35% to 56% depending on the selection oe varieties. 7. The radish also showed a high affinity between the treated plots, however, almost us affinity existed between varieties. Therfore, the yield of radish largely depends on the extent of drought, and the selection of variety does not affect at all. 8. The normal consumptive use on cabbage is $0.62{\ell}/sec$, while that on radish is $0.64{\ell}/sec$, and the minimum optimum water requirement that was obtained in this study is $4,000cc/day/m^3$ or $0.462{\ell}/sec/ha$.

• Applied Microscopy
• /
• v.29 no.3
• /
• pp.383-403
• /
• 1999

This study was performed to investigate the immunohistochemical and ultrastructural characterization of the choline acetyltransferase (ChAT)-immunoreactive nerve cells in the diagonal band of Broca of the rat basal forebrains, utilizing techniques of immunohistochemical and immunocytochemical microscopy. The ChAT-immunoreactivities were shown within neuronal cell bodies and processes by the light micoscope. According to cell shape and ratio of long axis vs short axis of cell body, the ChAT-immunoreaclive nerve cells in both vertical and horizontal limbs of the diagonal band of Broca were classified into 6 types. at the light microscopic level; round, oval, elongated, fusiform, triangular and polygonal types. As a result of the electron microscopic observation, the ChAT-immunoreactivated products appeared on the outer nuclear envelope, membranes of rough endoplasmic reticula (rER), free ribosomes and polysomes. Each cell type was subdivided into subtype I and II according to the several criteria such as volume of cell body, nuclear size relative to the cytoplasm, kinds and distribution of cell organelles and numbers and sorts of synapses. The subtype I of immnunoreactive nerve cells had large cell body and a small nucleus showing shallow indentations of nuclear evelope. In this subtype I with abundant cytoplasm, rER were well differentiated. Their long cisternae were parallelly ditributed and lamellated. One or two lamellar bodies and nematosomes were observed. The subtype II cell had small cell body and a large nucleus with deep indentations of nuclear envelope. In this subtype II with small cytoplasm, the rER were irregularly distributed and the lamellar body and nematosome were not found. A few axosomatic synapses in the subtype I and II were shown to be symmetric or asymmetric. The ratios of the symmetric synapse to the asymmetric one were investigated to be 1 : 2 and 1 : 4 in the subtype I and II, respectively. The axodendritic ones were almost asymmetric. But, the fusiform and triangular immunoreactive nerve cells were shown only to be subtype I. According to observations in this study, it is considered that the ultrastructural characterization in the 2 subtypes of each cell type may reflect the differences of the metabolic activities and projecting distances to the target cells.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.535-542
• /
• 2000

The purpose of this study was to find the characteristics of the frontal natural head position(NHP) of patients with facial asymmetry, and to contribute to the diagnosis of facial asymmetry in the clinical examination of orthodontic patients. Twenty adult patients who had apparent facial asymmetry and no severe sagittal skeletal discrepancy were selected as the asymmetry group, and 21 young adults who had symmetric faces were selected as the symmetry group. Frontal cephalograms were obtained in the state of NHP using a pivot-mounted fluid level device. The degree of the menton deviation was defined as the angle between the line drawn through crista galli and anterior nasal spine and the line drawn through crista galli and menton. The following angles were measured and each of them was compared with the degree of the menton deviation one is the angle between the true vertical line and the supra-orbital line which is a tangent line to the extreme cranial point on the supra-orbital margin, and the other is the angle between the true vertical line and the cervical line drawn through the midpoint of atlas and the 4th cervical vertebra. Through the statistical analysis, following results were obtained. 1. The angle between the supra-orbital line and the true vertical line was much mote deviated from the right angle in the asymmetry group than in the symmetry group. 2. The angle between the cervical line and the true vertical line in the asymmetry group showed greater tendency than in the symmetry group, but the difference was not statistically significant. 3. In the asymmetry group, the degree of the menton deviation was positively correlated with the angle between the supraorbital line and the true vertical line. The above results suggest that racial asymmetry patients show the tendency to have the tilted NHP to compensate the deviation of menton position.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.1
• /
• pp.29-35
• /
• 2009

In this paper by using the image taken from the rear of the vehicle to effectively extract the license plate and how to recognize the characters appearing in the offer. How to existing research on the entire video by following the pre-edge (edge) images to obtain yijinhwa. Qualified heopeu in a binary image (Hough) to convert the horizontal and vertical lines to obtain, using the characteristics of the plates to extract the license plate area. The problem with this method, the processing time is so difficult to handle real-time status of irregular points, and visual contrast with yagangwan border does not appear in the plates to extract the license plate area is that it is not. In addition, the rear of the vehicle license plate area from images taken using the characteristics of the plates myeongamgap changes sutjapok in the area, background area and the number number area of the region confirmed the contrast of the car and identified the number and the number of 42 of distance to extract the license plate area. How to research, the existing damage to the border of the plate to fail to extract the license plate area, a matter of hours to resolve problems in real-time, practical application is processed. Chapter 100 as the results of the experiment the sample video image in a car that far experiment results automatically read license plates have been able to extract the license plate and failing to represent 13% of images, character recognition result of failing to represent the image was 0.4%

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.4
• /
• pp.338-346
• /
• 2018

Crossed occlusion can be treated either by overdenture and telescopic denture or by placing an implant at the edentulous area to reestablish the support on the occlusion. If alveolar bony support is sufficient and an the environment where an implant is inserted is favorable to restoring the masticatory and aesthetic function of a patient, the implant-supported fixed prosthesis can provide more definitive occlusal support and more aid for other oral functions. In this case report, a patient with a severe residual alveolar bone resorption following the extraction of teeth and who had a crossed occlusion was treated with sinus bone graft and alveolar bone augmentation in order to place the implants at prosthetically position. The definitive restoration was made to reflect the patient's occlusal and aesthetic function using the CAD/CAM double scanning method. Finally, the treatment had the masticatory and aesthetic function adequately restored, which is reported here.

• Journal of Korean Society of Forest Science
• /
• v.84 no.4
• /
• pp.447-455
• /
• 1995

Regeneration process of a mongolian oak forest in Bukam-Ryeong area, Mt. Jumbong, Kangwon-Do, was studied in relation to its structure. The dominant trees of the stands came up beyond 10m in height. The upper-tree layer was highly dominated by oaks, and they distributed horizontally in random. Oak trees of the middle layer and the lower layer were few in number and small in basal area, and tended to be distributed contagiously. In the trees of the upper layer, the distribution of the age tended to be two modal type which has the mode of 70 and 230 years in plot. In the horizontal distribution of these trees, some of the even-aged cluster which were constituted of several trees, were found. The rate of the stern diameter increment during first 25 years of the oaks in upper layer were higher than those of the same species in the middle layer. These results showed that after the forest canopy had been broken out, the seedlings which were established in dense there grow with the decreasing density and some of these, of which distribution became in random, would constitute the canopy.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.51-61
• /
• 2016

New building methods are needed to aid increased inner-city redevelopment and industrial construction. A particular area of improvement is the efficient use of cut slopes, with the minimization of associated problems. A retaining wall of precast panels can resist the horizontal earth pressure by increasing the shear strength of the ground and reinforcing it through contact with the panels. Precast panels allow quick construction and avoid the problem of concrete deterioration. Other problems to be solved include the digging of borrow pits, the disposal of material cut from the slope, and degradation of the landscape caused by the exposed concrete retaining wall.This study suggest the methods of improvement of an existing precast panel wall system by changing the appearance of the panels to that of natural rock and improving the process of adhering the panel to a vertical slope. The panels were tested in the laboratory and in the field. The laboratory test verified their specific strength and behavior, and the field test assessed the panels' ground adherence at a vertical cutting. Reinforcement of the cutting slope was also measured and compared with the results of 3D numerical analysis. The results of laboratory test, identified that the shear bar increase the punching resistance of panel. And as a results of test construction, identified the construct ability and field applicability of the panel wall system adhered to in-situ ground. In addition to that, extended measurement and numerical analysis, identified the long-term stability of panel wall system adhered to in-situ ground.