• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.5
• /
• pp.12-25
• /
• 2016

In this study, in order to facilitate analysis in a continuous sequence, including the concept of the landscape experience time, countless frames of a continuous landscape were extracted. The amount of visual elements in each frame was data-converted numerically to take advantage of the quantitative data necessary for landscape planning and design was calculated in the rhythm of the sequence. In Order to shoot video with the flow of the line of sight of experience in landscape districts and landscape control points along the landscape corridor which is a continuous path, each of the corresponding computer motion techniques. This study developed a CRVP Koo computer program to effectively calculate the continuous visual number of specific landscape components by extracting uncounted frames at regular intervals, and after verifying, attempting to apply this to the target site. Through the applied result, it was possible to extract the digitized quantitative rhythm for each component of each landscape, the margin of error is very small when compared with the results of manual in photoshop, it was able to overcome the drawbacks of the manual. Using the rhythm of the derived sequence, and those close to the experience of the landscape, it was possible to achieve quantitative analysis derived from a variety of perspectives as well as was possible to be used as quantitative basis data and analysis technique for landscape planning and design.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.4
• /
• pp.35-41
• /
• 2015

Real estate appraisal methods include profit-based, cost-based and comparison-based measures. The purpose of this study is to scientifically quantify the comparison-based method mostly utilized in valuating real estate property among the appraisal methods. The comparison method is to estimate the value of target property from other previously-traded property cases by comparing and adjusting their temporal gap, spatial gap and space-time gap. In appraisal practices, this comparison method is used generally for land property. If based on previous transactions; prices, time point of transaction, region and individual factors were analyzed to valuate. If based on official land values; official value, time point, region and individual factors are analyzed. Of these, the individual factors are an important process of comparing individual characteristics where real estate appraisers' subjective assessment could intervene. Though appraisers, as experts make generally precise assessment, still, it is a subjective judgment open to difference between appraisers themselves, causing disputes from time to time. In this recognition, the study seeks to quantify such a subjective assessment of appraisers by running GIS analysis on individual factor components including street condition, access condition;and plotting condition.

• Korean Journal of Remote Sensing
• /
• v.32 no.6
• /
• pp.639-645
• /
• 2016

Yeongjong-do is seventh largest island in the west coast of Korea which is 4.8 km away in the direction of south-west from Incheon. The mudflat area around the Yeongjong-do has variable dimension according to tide level. In addition, Yeongjong-do is important area with high environmental value as wintering sites for migratory birds. The mudflat of Yeongjong-do is also meaningful region because it is used as place of education and tourist attraction. But, there are increasing concerns about preservation of mudflat area caused by artificial development such as land reclamation project and Incheon airport construction. In this paper, mudflat area was detected using Landsat 7 ETM+ images that United States Geological Survey (USGS) is providing the data in 16 days period. The false color composite was made from band 7, 5, and 3 that could dividing boundary between water and land for the purpose of appearance of boundary line in mudflat region. This area was calculated using results of classification based on false color composite images and was digitized through repetitive algorithm during research of period. Therefore, the change of northeastern area in Yeongjong-do was detected according to tide level during 16 years from 2000 to 2015 on the basis of providing period at tide station. This paper will expect as indicator for range of area in same tide level prior to the start of the research for preservation of mudflat. It will be also scientific grounds about change of mudflat area caused by artificial development.

• The Korean Society of Law and Medicine
• /
• v.17 no.1
• /
• pp.281-297
• /
• 2016

In order to make a treatment plan and outcome prediction, it is important to evaluate accurately and objectively osseous tissues of the implant area. The evaluation of osseous tissues is the most objective method for the decision of production time of upper structure of alveolar bone. However, the evaluation of osseous tissues contains contradiction because it is made by subjective opinions of dental surgeons. Many dentists also point out the problem of subjective evaluation of osseous tissues. Therefore, it is necessary to create accurate and objective standards. Previously, the evaluation of bone density depends on dentist's subjective sensation during drilling procedure of implant. However, the HU(Hounsfield unit) figure of CT(computed tomography) scan allows of objective and precise categorization of bone density now. Misch and Kircos divided the bone density levels from D1 to D5 with subjective separation of bone density. Their method also depended on not objective and quantification data but subjective separation by sensation. Thus, we need the evaluation of implant area through comparative analysis of more objective and quantification data. Implant treatment comprises the highest frequency of medical disputes of dental clinic. If we bring objective checkup and reasonable treatment method in the implant treatment, we can deduce more reasonable results, and the failure late of implant treatment also can decrease. The ultimate objective of this study is the minimization of dental disputes between dental patients and dentists by creating new legal standards on the basis of objective and quantification data.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.6
• /
• pp.884-889
• /
• 2010

Recently, a music genre classification has been studied. However, experts use different criteria to classify each of these classifications is difficult to derive accurate results. In addition, when the emergence of a new genre of music genre is a newly re-defined. Music as a genre rather than to separate search should be classified as emotional words. In this paper, the feelings of people on the basis of brightness and darkness tries to categorize music. The proposed classification system by applying VCM(Variance Considered Machines) is the contrast of the music. In this paper, we are using three kinds of musical characteristics. Based on surveys made throughout the learning, based on musical attributes(beat, timbre, note) was used to study in the VCM. VCM is classified by the trained compared with the results of the survey were analyzed. Note extraction using the MATLAB, sampled at regular intervals to share music via the FFT frequency analysis by the sector average is defined as representing the element extracted note by quantifying the height of the entire distribution was identified. Cumulative frequency distribution in the entire frequency rage, using the difference in Timbre and were quantified. VCM applied to these three characteristics with the experimental results by comparing the survey results to see the contrast of the music with a probability of 95.4% confirmed that the two separate.

• The Journal of Engineering Geology
• /
• v.12 no.4
• /
• pp.421-437
• /
• 2002

In order to quantify the anisotropic properties of rock included joints and shear behavior in joint surface, the mold is Produced for rock joint surface using gypsum Plaster and Peformed for replicated joint models made of cement mortar. Rock sample is measured using mechanical profilometer before testing and their result is expressed quantitatively. The statistical parameters and the fractal dimension by fractal theory for roughness is investigated its coordinate value for numerical process. The shear strength to the shear displacement in low level normal stress ismaintained or increased in most joint models. Their results present that this relationship is depended several roughness properties in joint model for natural rock joint. The relationship between the shear strength and the Properties for profiles estimated by some statistical parameter in roughness has the low correlation and is not constant. The result between the data for direct shear test and using Barton's equation, Barton's equation has not the effectiveness for the effect of anisotropy and has not suitable to recognizing the properties for joint surface. It means that JRC has not the properties of anisotropic rock surface. The fractal dimension is well correlated with the data of direct shear test than those of JRC. New experimental formulae using fractal dimension is comported with the anisotropic properties for direct shear test.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.418-428
• /
• 2019

The purpose of this study was to analyze and clarify the forest information shown in the Korean Peninsula Forest Distribution Map (KPFDM) printed in 1910. First, the background, process, results, and reliability of the Forest Survey Project (1910), which is the basis of the KPFDM, were evaluated. Next, the information of the KPFDM, preserved as a paper map, was digitized to show forest status and forest type. The results of the analysis can be summarized as follows: Analyzing the Korean peninsula of the 1910 period in terms of the present South and North Korean regions, stocked forests were found to be more widely distributed (73%) in the northern region. The southern region largely consisted of deforested areas, with young-growth trees and unstocked forests making up 80% of all forests there. The northern region had abundant natural forests, with 80% of the forests in Yanggang-do, which currently includes Mt. Baekdu and the Hyesan area, composed of stocked forests. Pinus densiflora was found about 2.7 times more often in the southern region than in the northern region. Large numbers of coniferous trees excluding Pinus densiflora were found in the northern region. In particular, 53% of the forests and 72% of the stocking land in the southern region were composed of Pinus densiflora.

• Journal of Internet of Things and Convergence
• /
• v.9 no.3
• /
• pp.27-33
• /
• 2023

In this study, it was analyzed with the dyeing pattern of Diospyros kaki Thunb (persimmon) and was tried to numerically evaluate how the dyeing pattern in silk fabrics and cells was changed by different mordants. When the dyed silk fabrics were sufficiently dried, the silk fabrics were found to have a pale yellow color. Interestingly, iron II sulfate mordant changed the color change the most, silk fabrics were dyed with a color close to brown or dark purple. For numerical analysis, 19% and 62.5% color changes could be induced by sodium tartrate plus citric acid and copper acetate, respectively. Iron II sulfate induced the greatest difference than that of untreated mordants at 88%. About 5% and 10% of Chinese hamster ovary (CHO) cells were stained by sodium tartrate plus citric acid and copper acetate, respectively. The staining effect induced by iron II sulfate was about 2.4 times higher than the staining effect by sodium tartrate plus citric acid. In previous studies, staining results have been visually confirmed. However, this results not only visually confirmed the dyeing, but also quantified the color change. In particular, if numerical results are continuously integrated into big data, any researcher will be able to easily obtain similar results even if the method, time, volume, etc. are changed. In addition, the numerical data of this study is considered to be an important basis for building a database for IoT construction and computer analysis.

• Design Convergence Study
• /
• v.16 no.5
• /
• pp.1-20
• /
• 2017

Cardio-cerebrovascular disease is one of the chronic diseases that often attack people in Korea, and in fact, it ranks second in terms of death rate. This disease can be prevented by improving lifestyle, usual health care is important. But, in Korea most of the prevention or management programs adopt passive methods like using guide books or giving lectures, so it is not very effective in preventing the disease. Presently, the smart health care market is being developed in Korea and overseas. As an example, quantified self is being spread through wearable devices which are intended to measure each individual's health conditions and quantify body data into numbers for bettering habits. Accordingly, this author will explore and discuss wearable health care devices so as to prevent and manage cardio-cerebrovascular disease in a more active way. First, this study has classified wearable health care devices presently commercialized or related with cardio-cerebrovascular disease into wrist, clothes, or attaching types by the way of their attachment and analyzed them. After that, summing that up, this author performed cross-tabulations with other ways of preventing cardio-cerebrovascular disease. This will contribute to improving one's health care behavior about disease more actively and also work as an active interdisciplinary mechanism in research dealing with how to prevent disease afterwards.

• The KIPS Transactions:PartD
• /
• v.12D no.6 s.102
• /
• pp.829-836
• /
• 2005

The way to assign a splitting criterion for correct object classification is the main issue in all decisions trees. This paper describes new splitting rules for classification in order to find an optimal split point. Unlike the current splitting rules that are provided by searching all threshold values, this paper proposes the splitting rules that we based on the probabilities of pre assigned intervals. Our methodology provides that user can control the accuracy of tree by adjusting the number of intervals. In addition, we applied the proposed splitting rules to a set of image data that was retrieved by parameterized feature extraction to recognize image objects.