• Korean Journal of Remote Sensing
• /
• v.31 no.5
• /
• pp.461-471
• /
• 2015

In this study, we generated orthoimages and Digital Elevation Model (DEM) from Unmanned Aerial Vehicle (UAV) to confirm the accuracy of possibility of geospatial information system generation, then compared the DEM with the topographic height values measured from Real Time Kinematic-GPS (RTK-GPS). The DEMs were generated from aerial triangulation method using fixed-wing UAV and rotary-wing UAV, and DEM based on the waterline method also generated. For the accurate generation of mosaic images and DEM, the distorted images occurred by interior and exterior orientation were corrected using camera calibration. In addition, we set up the 30 Ground Control Points (GPCs) in order to correct of the UAVs position error. Therefore, the mosaic images and DEM were obtained with geometric error less than 30 cm. The height of generated DEMs by UAVs were compared with the levelled elevation by RTK-GPS. The value of R-square is closely 1. From this study, we could confirm that accurate DEM of the tidal flat can be generated using UAVs and these detailed spatial information about tidal flat will be widely used for tidal flat management.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.143-148
• /
• 2008

This Study is about driving simulation after road design by 3D-GIS in digital elevation model from digital aerial photogrammetry. For designing roads efficiently it's very important to consider geographical features before design when analyze the view. Nevertheless, existing studies is mainly restricted in the mountainous, despite of using digital map or aerial photogrammetry and the study which used aerial photo in the area where the road designing is made really is not get executed. Therefore, this study will do 3D-road design and driving simulation by appling really road design data to topography, on the basis of digital elevation generated from aerial photogrammetry.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.3 s.21
• /
• pp.71-77
• /
• 2002

DEMs(digital elevation models) are generally used to automatically map the channel network and to delineate subbasins. At present, most DEM data are derived from three alternative sources which are ground survey, pphotogrammetric data capture and digitized cartographic data sources. The accuracy of a DEM is dependent on the spatial resolution, quality of the source data, collection and processing procedures, and digitizing systems. weather conditions and nature environment.etc provide us satellite image of the highest quality. However, Match in error of the auto generation DEM was severely affected by physical and environmental conditions at shooting time. This paper shows that real-time operation analysis of applied hydrology after extracting DEM Using a pair of Kompsat images.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.167-172
• /
• 2002

본 연구는 GPS를 이용하여 위성 영상의 입체 해석으로 산출된 SPOT영상의 기준점 및 수치 표고 모형의 평가에 목적이 있다. 이를 위해 삼각점 및 상시관측소를 고정으로 한 GPS 해석을 수행하였으며 정지측량과 이동측량의 정확도를 비교함으로써 위성 영상의 기준점과 수치 표고 모형의 평가를 위한 측량 방법을 분석하였다. 연구 결과, SPOT영상의 해상력을 고려할 때, 이동 GPS측량기법으로도 수치 표고 모형의 정확도 평가가 가능하였으며, 기준점 좌표 산출에 있어서 고정점에 삼각점 대신 상시관측점들을 사용함으로써 경제적인 GPS 측량을 꾀할 수 있었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.73-80
• /
• 2004

The purpose of this study is the GCP/DEM estimations through satellite stereo image interpretation using GPS. We carried out GPS observation fixing first order control points and GPS permanent stations. Comparing static surveying and kinematic surveying, we analysed the surveying methods for GCP and DEM estimations. As the results, considering SPOT image spatial resolution, the DEM can be made through satellite stereo image interpretation.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2006.05a
• /
• pp.181-186
• /
• 2006

오늘날 토목공사에서 토량을 산정하기 위해서는 많은 지형정보를 필요로 한다. 지형정보 획득의 한 방법으로 라이다측량을 실시하여 지형의 표고를 획득 할 수 있으며, 라이다 데이터는 기존의 일반측량, 사진측량, 원격탐측과 비교하여 좀 더 빠르고 정확한 지표의 표고를 획득할 수 있다. CPS 데이터와 함께 획득한 라이다 데이터는 지상의 수치표고모델 및 등고선 추출이 가능하며, 이 수치표고모델을 이용하여 토량을 산정하고 기존의 1:1000 수치지형도에서 산정한 토량과 정량적 비교를 수행하였다 비교결과 라이다 데이터가 수치지형도 상에서의 토량 산정 보다 더 정확한 결과를 얻을 수 있었다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.141-152
• /
• 1993

This study aims to generate digital elevation model from digital satellite imagery. Digital elevation model is being increasingly used for geo-spatial information system database development and for digital map production. Image matching technique was applied to acquire conjugate image coordinates and the algorithm for digital elevation model generation is presented in this study The exterior orientation parameters of the satellite imagery is determined by bundle adjustment and standard correlation was applied for image matching conjugate of image points. The window as well as the searching area have to be defined in image matching. Different sizes of searching area were tested to study the appropriate size of the searching area. Various coordinate transformation methods were applied to improve the computation speed as well as the geometric accuracy. The results were then statistically analysed after which the searching area is determined with the safety factor. To evaluate the accuracy of digital elevation model, 3-D coordinates were extracted from 1/5000 scale topographic map and this was compared to the digital elevation model generated from satellite imagery. The algorithm for generation of digital elevation model generated from satellite imagery is presented in this study which will prove effective in the database development of geo-spatial information system and in digital elevation modelling of large areas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.163-171
• /
• 1992

The narrow interal grid is effective in accuracy, but it is not able to make a densely grided sample, so that smoothing is requared. In digital elevation models, an application of the finite elements method is effective to smooth the undesired noise which is generated in aquisition of elevation data. And this is one of the simple and direct method to solve the problem for discontinuity of terrain. Therefore, the finite elements method is applied to study. In digital elevation model by appling the finite element, smoothing is affected by the height weight. In this study, the relation equation between elevation weight and standard deviation of smoothing was obstained as Y = 1900625 $X^4-312987.6$ $X^3+20330.72$ $X^2-578.6029$ X+12.63772 and from this function, Optimum elevation weight is 0.05.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.117-125
• /
• 2014

Korea's first X-band SAR satellite KOMPSAT-5 has been launched in 2013, so the research related to the X-band SAR satellite image is required to increase the utilization of KOMPSAT-5. In this study, we generated a DEM(Digital Elevation Model) using X-band SAR satellite images based on three methods which are InSAR, radargrammetry and RPC(Rational Polynomial Coefficients), and evaluated the performance of each methods. The four stripmap mode TerraSAR-X images taken in Daejeon were used to generate DEM, and accuracy was evaluated using DEM by IKONOS RPC. As results, DEM produced by the InSAR showed the highest accuracy. Also, we knew that RPC could be effective method if you want to create a large area DEM which contains the various elevation.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.2 s.6
• /
• pp.5-19
• /
• 2001

We are able to construct and utilize DEM(Digital Elevation Model) throughout the NGIS(National Geographic Information System) project. It is important that interpolation methods and appreciate size of grid for the construction of accurate DEM(Digital Elevation Model). There were several references related to the DEM(Digital Elevation Model) construction method, however they couldn't consider various topographical characteristics in the korea. In this study, we recommended that suitable interpolation method for each topographic element. After dividing Poonggi area into mountain, hill, urban, agricultural land, we constructed DEM(Digital Elevation Model) with various interpolation methods and grid size using 1:5,000 digital map. Then evaluated accuracy using elevation data which extracted from air-photo. The interpolation methods were analyzed and compared for various topographical conditions. As a result, Kriging method was superior to TIN method for all the topographical conditions. Another experiment was performed to examine optimal grid space for DEM with each topographical condition. 10m grid space was most suitable for mountain area and hilly districts, while 30m grid space was most suitable for urban area and farm land.