• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.257-264
• /
• 2020

Vectorization is currently the main method in feature collection (extraction) during digital mapping using UAV-Photogrammetry. However, this method is time consuming and prone to gross elevation errors when extracted from a DSM (Digital Surface Model), because three-dimensional feature coordinates are vectorized separately: plane information from an orthophoto and height from a DSM. Consequently, the demand for stereo plotting method capable of acquiring three- dimensional spatial information simultaneously is increasing. However, this method requires an expensive equipment, a Digital Photogrammetry Workstation (DPW), and the technology itself is still incomplete. In this paper, we evaluated the accuracy of low-cost stereo plotting system, Menci's StereoCAD, by analyzing its three-dimensional spatial information acquisition. Images were taken with a FC 6310 camera mounted on a Phantom4 pro at a 90 m altitude with a Ground Sample Distance (GSD) of 3 cm. The accuracy analysis was performed by comparing differences in coordinates between the results from the ground survey and the stereo plotting at check points, and also at the corner points by layers. The results showed that the Root Mean Square Error (RMSE) at check points was 0.048 m for horizontal and 0.078 m for vertical coordinates, respectively, and for different layers, it ranged from 0.104 m to 0.127 m for horizontal and 0.086 m to 0.092 m for vertical coordinates, respectively. In conclusion, the results showed 1: 1,000 digital topographic map can be generated using a stereo plotting system with UAV images.

• Journal of Korean Society of Disaster and Security
• /
• v.11 no.2
• /
• pp.37-43
• /
• 2018

The storm surge is caused by an typhoons and it is not easy to predict the location, strength, route of the storm. Therefore, research using a scenario for storms occurrence has been conducted. In Korea, hazard maps for various scenarios were produced using the storm surge numerical simulation. Such a method has a disadvantage in that it is difficult to predict when other scenario occurs, and it is difficult to cope with in real time because the simulation time is long. In order to compensate for this, we developed a method to predict the storm surge damage by using research database. The risk grade prediction for the storm surge was performed predominantly in the study area of the East coast. In order to estimate the equation, COMSOL developed by COMSOL AB Corporation was utilized. Using some assumptions and limitations, the form of the basic equation was derived. the constants and coefficients in the equation were estimated by the trial and error method. Compared with the results, the spatial distribution of risk grade was similar except for the upper part of the map. In the case of the upper part of the map, it was shown that the resistance coefficient, k was calculated due to absence of elevation data. The SIND model is a method for real-time disaster prediction model and it is expected that it will be able to respond quickly to disasters caused by abnormal weather.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.691-702
• /
• 2019

Flood inundation map has various important roles in terms of municipal planning, timely dam operation, economic levee design, and building flood forecasting systems. Considering that the riparian areas adjacent to national rivers with high potential flood vulnerability conventionally imposed special cares to justify applications of recently available two- or three-dimensional flood inundation numerical models on top of digital elevation models of dense spatial resolution such as LiDAR irrespective of their high costs. On the contrary, local streams usually could not have benefits from recent technological advances, instead they inevitably have relied upon time-consuming manual drawings or have accepted DEMs with poor resolutions or inaccurate 1D numerical models for producing inundation maps due mainly to limited budgets and suitable techniques. In order to efficiently and cost-effectively provide a series of flood inundation maps dedicatedly for the local streams, this study proposed an OpenGIS-based flood mapping tool named Open Flood Mapper (OFM). The spatial accuracy of flood inundation map derived from the OFM was validated throughout comparison with an inundation trace map acquired after typhoon Nari in Hancheon basin located in Jeju Island. Also, a series of inundation maps from the OFM were comprehensively investigated to track the burst of flood in the extreme flood events.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.4
• /
• pp.469-476
• /
• 2009

The new laser scanning technology allows to attain 3D information faster with higher accuracy on surface ground, vegetation and buildings of the earth surface. This acquired information can be used in many areas after modifying them appropriately by users. The contour production for accurate landform is an advanced technology that can reveal the mountain area landscapes hidden by the trees in detail. However, if extremely precise LiDAR data is used in constructing the contour, massive-sized data intricates the contour diagram and could amplify the data size inefficiently. This study illustrates the algorithm producing contour that is filtered in stages for more efficient utilization using the LiDAR contour produced by the detailed landscape data. This filtering stages allow to preserve the original landscape shape and to keep the data size small. Point Filtering determines the produced contour diagram shape and could minimize data size. Thus, in this study we compared experimentally filtered contour with the current digital map(1:5,000).

• Journal of Korean Society for Geospatial Information Science
• /
• v.25 no.1
• /
• pp.3-8
• /
• 2017

In this study future wind resource maps have been produced under climate change scenario using ensemble regional climate model weather research and forecasting(WRF) for the period from 2045 to 2054(mid 21st century). Then various spatiotemporal analysis has been conducted in terms of monthly and diurnal. As a result, monthly variation(monsoon circulation) was larger than diurnal variation(land-sea circulation) throughout the South Korea. Strong wind area with high wind power energy was varied on months and regions. During whole years, strong wind with high wind resource was pronounced at cold(warm) months in particular Gangwon mountainous and coastal areas(southwestern coastal area) driven by strong northwesterly(southwesterly). Projected strong and weak wind were presented in January and September, respectively. Diurnal variation were large over inland and mountainous area while coastal area were small. This new monthly and diurnal variation would be useful to high resource area analysis and long-term operation of wind power according to wind variability in future.

• Journal of the Korean association of regional geographers
• /
• v.12 no.2
• /
• pp.281-290
• /
• 2006

Map uses graphic language of dot, line and area to represent surface of the earth. Map has been adopted as tools for regional and cartography learning to improve graphicacy in geography education. Due to the rapid development in GIS and internet, practical use of maps has been extended in various study area. This Study is to develope web-based leaning materials for self-controled geography instruction. As learning materials for this aim, it has been constructed WebGIS for topography and thematic maps with boundary map of Chungbuk, digital map of Jochiwon(1:25,000), statistic data and field images. Function of WebGIS intend to improve skills on geo-information collection and spatial query, regional difference of spatial distribution. Individual learning using internet can make an improvement of learner centeredness and problem-solving. Finally, it will be expected to be suggest one of the education guide as blueprint in info-society.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.03a
• /
• pp.156-161
• /
• 2002

자연공원의 체계적인 관리를 위해서는 효율적인 자료수집과 처리, 그리고 합리적인 분석과정이 필요하며, 이러한 관점에서 지형공간정보체계와 위성원격탐사를 이용하는 공원관리 및 관광안내시스템의 개발이 요구되는 시점이다. 본 연구에서는 금오산 도립공원구역을 사례연구지역으로 GSIS(Geo-Spatial Information System)기법을 도입하여 수치지형도, 주제도, 위성영상 등으로부터 도형자료 및 비도형자료를 수집 처리하였다. DEM 생성을 통하여 얻어진 경사도, 사면방향, 지형단면, 지질 분석 등 주제별 지형분석을 행하였다. Landsat TM 위성자료로부터 토지피복분류와 NDVI 식생활력도를 추출하였고, 이 자료들로부터 GSIS 데이터베이스를 구축하였다. 또한 대상지역을 포함하는 Im 해상도의 IKONOS 위성자료를 처리하여 영상지도를 작성하고 DEM과 중합하여 3D 시각화를 구현하였다. 위성영상지도 및 3차원 경관도상에 주요 등산로 벡터자료를 중첩하여 표현하고, 5개 루트의 주요 등산로를 따라 3D 경관 및 문화재, 관리시설 등을 포함하는 동영상 파일을 제작하였다. 본 연구의 결과는 개발과 보존의 중도를 취하는 자연공원의 적정 토지이용을 위한 사전평가 자료 및 Web 기반 관광안내시스템을 구축하기 위한 기본데이터로 활용될 수 있을 것이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.345-349
• /
• 2007

삽교천 홍수예보시스템은 1999년에 개발되어 현재까지 운영되고 있으나, 개발 이후 유역특성의 변화를 반영한 모형 개선이 이루어지지 않았고, 삽교천 하구둑의 영향을 고려한 모형은 개발되어 있지 않은 실정이다. 이 지역 중에서 특히 천안/아산지역은 급격한 인구증가와 산업화 및 도시화에 의해 면적당 자산의 고도화가 증가하며, 이에 따라 홍수시 피해잠재능은 점점 증가하고 있는 상황이다. 홍수예보 정확도 향상을 위하여 삽교천 유역내 수위관측소 증설에 따른 소유역을 재분할하여 유역특성변화에 따른 수문학적 모형을 재구축하였다. 따라서, 삽교천유역에 신설 및 T/M화된 수문관측소에 대한 소유역 분할과 저류함수법을 이용하기 위한 저류상수를 산정하기위해 기존의 일반 종이지도로 제작된 지형도(1:50,000), 녹지자연도, 지질도, 개략토양도 등을 이용하는 대신 수치지도를 이용하여 저류상수를 산정하였다. 변화된 유역 조건을 가지고 삽교천 유역의 전체 유역 및 하도유출계산을 수행한 후, 측정 결과가 있는 지점의 수문곡선과 비교하여 모형상수가 적절히 산정되었는지 검토하고, 개선된 모형상수를 제시하였다. 또한 홍수예보지점인 원평지점의 선행예보시간을 확보하기 위하여 원평지점 상류의 예당저수지 방류량과 원평지점 수위간의 통계학적모형을 구축하였고, 2시간 이상의 선행예보시간을 확보하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.4
• /
• pp.449-454
• /
• 2010

Lately, airborne digital camera and airborne laser scanner in field of airborne surveying are used to build geography information such as digital ortho photo map and DEM(Digital Elevation Model). In this study, 3D position accuracy is compared medium format CCD camera RCD105 with airborne digital camera DMC. For this, test area was decided for aerial photograph. And using 1/1,000 scale digital map, ground control points were selected for aerial triangulation and check points were selected for horizontal/vertical accuracy analysis using softcopy stereoplotter. Accuracy of RCD105 and DMC was estimated by result of aerial triangulation and result of check points measurement of using softcopy stereoplotter. In result of aerial triangulation, RMSE(Root Mean Square Error) X, Y, Z of RCD105 is 2.1, 2.2, 1.3 times larger than DMC. In result of check point measurement using softcopy stereoplotter, horizontal/ vertical RMSE of RCD105 is 2.5, 4.3 times larger than DMC. Even though accuracy of RCD105 is lower than DMC, it is maybe possible to make digital map and ortho photo using RCD105.

• Journal of Korea Water Resources Association
• /
• v.35 no.4 s.129
• /
• pp.359-366
• /
• 2002

The damages from the natural disasters, especially from the floods, have been increasing. Therefore, it is imperative to establish a BMP to diminish the damages from the floods and to enhance the welfare of the nation. Developed countries have been generating and utilizing flood risk maps to raise the alertness of the residents, and thereby achieving efficient flood management. The major objectives of this research were to develop a prototype management system for flood risk map to forecast the boundaries oi the inundation and to plot them through the integration of geographic and hydrologic database. For more efficient system development, the user requirement analysis was made. The GIS database design was done based on the results from the research work of river information standardization. A GIS database for the study area was built by using topographic information to support the hydrologic modeling. The developed prototype include several modules; river information edition module, map plotting module, and hydrologic modeling support module. Each module enabled the user to edit graphic and attribute data, to analyze and to represent the modeling results visually. Subjects such as utilization of the system and suggestions for future development were discussed.