• Fire Science and Engineering
• /
• v.14 no.2
• /
• pp.21-32
• /
• 2000

In this study, reduced-scale experiments as the alternative to a real-scale fire test were conducted to understand fire properties in tunnel, and their results were compared with those of numerical simulation. The 1/20 scale experiments were conducted under the Froude scaling since smoke movement in tunnel is governed by buoyancy farce. A numerical simulations were on performed 3D unstructured meshes with PISO algorithm and buoyant plume models. Results showed that data was in reasonable agreement with the numerical data of smoke velocity, temperature distribution, and clear height.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.131-131
• /
• 2023

지하수는 담수-염수 경계면의 형성 및 변동 특성, 지하수위 분포 및 변동특성에 따라 기저지하수, 준기저지하수, 상위지하수 등으로 구분된다. 이 중, 기저지하수는 담수(1,000g/cm³)와 염수(1,025g/cm³)의 비중 차이에 의해 담수가 염수 상부에 Ghyben-Herzberg 원리에 의해 부존한다. 본 연구에서는 부존 형태에 따른 지하수위 변동을 보고자 하였다. 먼저 이상화된 지형에서 부존형태에 따른 지하수위 변동의 영향을 확인하고자, OpenGeoSys 모형을 이용하여 3차원 수치모의를 수행하였다. 그 결과 상위지하수의 지하수위보다 기저지하수 조건에서의 지하수위가 낮아진 것을 확인할 수 있었다. 이는 부존 형태의 차이로 인해 발생되는 담수-염수 비중 차이가 지하수위 변동에 영향을 미친다는 것을 파악할 수 있었다. 또한, 실제 지형에 적용하여 지하수위의 변동성을 분석하기 위해서, 제주 남부 중서귀 유역을 대상으로 수치모의를 수행하였다. 모형 검증은 범위 내 4개의 관측지점에서의 2022년 지하수위 자료를 이용하였다. 검증된 모델에 염분 농도 조건을 추가하여 기저지하수를 형성하여 모의를 수행했다. 따라서 본 연구는 부존 형태의 차이로 인해 발생되는 담수-염수 비중 차이가 지하수위에 끼치는 영향을 파악할 수 있었다. 향후, 상위지하수에서 염수가 침입했을 때, 수위 저하에 따라 감소되는 지하수위량을 예측할 수 있을 것이라 기대된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.305-305
• /
• 2020

2019년 10월에 발생한 태풍 미탁은 강원도 삼척시 근덕면 궁촌리 기준 시간당 최대 129mm/hr, 누적강수량 488.5mm를 기록하며 폭우와 강풍, 홍수, 토석류 및 산사태로 사망 13명, 실종 2명, 이재민 910세대 1,442명의 인명피해와 공공시설 1,835건, 사유시설 3,700건 등의 재산 피해가 발생하였다. 한편 Hyper KANAKO 모형은 일본에서 개발된 토석류 수치 모델로 오픈소스인 QGIS와 연동되어 도구의 형태로 사용할 수 있어 사용자에게 편리함을 제공하고 토석류 해석 시 침식 및 퇴적작용의 해석이 가능하다. 1차원의 지형(계류)과 2차원의 지형(퇴적부)의 지반설정과 사방댐의 종류(Closed, Slit, Landslide) 및 개수, 위치, 높이 등을 쉽게 조절할 수 있다는 장점이 있다. 또한, DEM을 기반으로 변환 프로그램을 사용하여 구축한 자료인 LP(Laser Profiler) 데이터를 바탕으로 3차원의 지형을 볼 수 있어 2차원의 지형보다 사용자의 직관적인 해석이 가능하다. 본 연구에서는 QGIS와 Hyper KANAKO를 이용하여 태풍 미탁으로 토석류 피해가 발생한 강원도 삼척시 신남지역을 대상으로 DEM과 LP 데이터를 구축하고 수치모델링을 실시하여 현장조사 결과와 비교분석 하였다.

• Tunnel and Underground Space
• /
• v.18 no.3
• /
• pp.202-213
• /
• 2008

In this study, theoretical approach of 3D seismic traveltime tomography was investigated. To guarantee the successful field application of 3D tomography, appropriate control of problem associated with blind zone is pre-requisite. To overcome the velocity distortion of the reconstructed tomogram due to insufficient source-receiver array coverage, the algorithm of 3D seismic traveltime tomography based on the Fresnel volume was developed as a technique of ray-path broadening. For the successful reconstruction of velocity cube, 3D traveltime algorithm was explored and employed on the basis of 2nd order Fast Marching Method(FMM), resulting in improvement of precision and accuracy. To prove the validity and field application of this algorithm, two numerical experiments were performed for globular and layered models. The algorithm was also found to be successfully applicable to field data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1B
• /
• pp.137-147
• /
• 2008

Soil Vapor Extraction (SVE) has been extensively used to remove volatile organic compounds (VOCs) from the vadoze zone. In order to investigate the removal mechanism during SVE operation, laboratory modeling experiments were carried out and tailing effect could be observed in later stage of the experiment. Tailing effect means that removal rate of contaminants gets significantly to decrease in later stage of SVE operation. Also, mathematical model simulating the tailing effect was used, which considers rate-limited diffusion in a water film during mass transfer among gas, liquid, and solid phases. Measurement data obtained through the experiment was used as input data of the numerical analyses. Sensitivity analysis was performed to examine the effect of each parameter on required time to reach final target concentration. Finally, it was found that the concentration in the soil phase decreased significantly with a liquid and gas diffusion coefficient larger, actual path length shorter, and water saturation smaller.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.148-156
• /
• 2018

The integrity assessment of the bridge behavior is generalized by field data of a static load-deformation curve and dynamic properties such as impact factors and natural frequencies. Evaluating it with numerical analysis is a reasonable method. The results of the mockup test and the numerical analysis are corresponded with each other since the behavior of service load proceeds in elastic region. In case of the dynamic behavior of structure, especially for the analysis of vibration, the result of the mockup test differs from the result of numerical analysis a little due to the geometric shape and non-homogeneous materials. In order to converge on these tolerances, this study suggested several numerical models, analyzed the sensitivity and finally offered a practical modeling method for the estimation of bridge on the basis of the result of mockup test. Based on the model substituted concrete section for strands section, the natural frequency of the model composed with axial stiffness of strands or the model applied the modified modulus of elasticity was closest with the result of the mockup test.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.515-525
• /
• 2014

Recently, because of increasing in downpour and typhoon, which are caused by climate changes, those sedimentation disasters, such as landslide and debris flow, have become frequent. Those sedimentation disasters take place in natural slope. In order to predict debris flow damage range within wide area, the response model is more appropriate than numerical analysis. However, to make a prediction using Random Walk Model, the regional parameters is needed to be decided, since the regional environments conditions are not always same. This random Walk Model is a probability model with easy calculation method, and simplified slope factor. The objective of this study is to calculate the optimal parameters of Random Walk Model for Umyeon mountain in Seoul, where the large debris flow has occurred in 2011. Debris flow initiation zones and sedimentation zones were extracted through field survey, aerial photograph and visual reading of debris flow before and after its occurrence via LiDAR DEM.

• Water for future
• /
• v.23 no.4
• /
• pp.487-497
• /
• 1990

The qualitative and quantitative prediction for the dispersion of thermal discharge from nuclear / fossil power plant, steel works etc. has significant roles for the cooling system. Design and environmental management. In this study, the several important physical properties for the behavior of a thermal discharge with strong turbulent and buoyant effects are described. The comparative evaluation between MIT and PDS models is carried out, which have the different model structures. In general, MIT and PDS models are commonly used to calculate the thermal discharge behavior with considering the ambient current and the angle of jet in an unstratified water body. The simulated results by these models have great discrepancies due to the different assumptions in modling.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.1
• /
• pp.61-70
• /
• 2008

The control and prediction of surface settlement, gradient and ground displacement are the main factors in shallow tunnel design and construction in urban area. For deformation analysis of shallow tunnel due to excavation it is important to identify possible deformation mechanism of shear bands developing from tunnel shoulder to the ground surface. This paper investigaties quantitatively the deformation behavior of shallow tunneling by model tunnel test and strain softening analysis Incorporating the reduction of shear stiffness and strength parameters. The comparison of model tunnel test result and numerical simulation using strain softening analysis showed good agreement in crown settlement, normalized subsidence settlement and developing shear bands above tunnel shoulder. In this study, it is blown that the strain softening modeling is applicable to the nonlinear deformation analysis of shallow tunnel.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.488-488
• /
• 2023

유량에 따른 수치모형(Nays2D) 하상변동 모의 결과를 토대로 서식처 적합도 분석 모델(PHABSIM: Phsical Habtiat Suitability Model)의 입력자료로 활용하여, 유량에 따른 하상 지형변화와 그에 따른 어류 서식처 적합도 변화를 분석한다. 금강 2km를 대상으로 2차원 모형인Nays2D를 적용하여 부등류 흐름(댐 방류량, 2년 빈도 유량, 100년 빈도 유량 등)에 따른 하상변동모의를 실시하였고, 모의 결과값(단면 표고, 유속, 수위)을 물리적 서식처 평가 모델인 PHABSIM의 입력자료로 활용하였다. 피라미 서식을 위한 적정 유속과 수심의 서식처 적합도 지수를 이용하여 각 유량별 가중가용면적(WUA: Weighted Usable Area)을 산정하여 비교 분석하여, 유량에 따른 단면 구조의 변화가 WUA와 피라미 서식처 적합도에 어떻게 영향을 미치는지 검토한다. 본 연구는 2차원 수치 모의 결과에 따른 단면(혹은 지형) 변화 양상과, 그에 따라 피라미를 비롯한 다른 생물종(어류, 저서성대형무척추동물)의 분포 경향에 연관성이 있는지를 실제 유량 변화와 생물종 조사 결과(물환경정보시스템에서 제공하는 생물종 데이터 활용)와 연계하여 검토 및 검증해보고, PHAMSIM을 이용한 서식처 적합도 분석 시 고려해야할 변수 및 검증 방법 제언에 중점을 둔다.