• Title/Summary/Keyword: 수직적 재사용

Search Result 182, Processing Time 0.026 seconds

Adaptive fingerprint minutiae validation method based on quality check of local block (지역적 품질 측정을 이용한 적응적 지운 특징점 검증 방법)

  • 황경서;문성림;정석재;김동윤
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2004.04b
    • /
    • pp.832-834
    • /
    • 2004
  • 특징점 기반 지문 인식 시스템은 지문의 특징점 정보를 사용하기 때문에 교문 획득 시 발생하는 거짓 특징점에 많은 영향을 받는다. 거짓 특징점의 제거를 위해 특징정의 이웃 융선을 추적하는 위상 검증 방법(Topological validation)은 거짓 특징점 제거에 뛰어난 효율을 보이지만 올바른 특징점까지 제거되는 단점이 있다. 본 논문에서는 올바른 특징점이 거짓 특징점으로 오판되어 제거되는 것을 줄이기 위챈 가보 필터를 사용하여 특징점 주위 영역을 특징점 방향과 특징점 방향에 수직인 방향으로 필터링 수행 후 특징값의 차를 구하여 특징점의 품질을 평가하였다. 특징값이 일정 기준을 넘는 좋은 품질의 영역에서 추출된 특징점이면 거짓 특징점 제거 알고리즘을 수행하지 않음으로써 올바른 특징점이 제거되는 것을 막을 수 있었고 이와 같이 추출된 특징점들을 이용해 실험한 결과 ERR(Equal eRror Rate)에서 1.7%의 성능 향상을 보였다.

  • PDF

The Effect of indoor illuminance depends on direction of the side windows lighting (측창채광의 방향에 따른 실내조도의 영향)

  • Cho, Shee-Man;Kim, Won-Joong;Jang, Woo-Jin
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2004.05a
    • /
    • pp.253-260
    • /
    • 2004
  • 실내의 조명은 자연채광방식과 인공조명으로 나누어지는데 자연형 채광방식에서도 측창채광과 천창채광, 정 측창채광 그리고 반사 채광방식이 있다. 측창채광은 벽면에 대하여 일반적으로 연직인 창에 의한 채광을 말한다. 측창채광의 방향에 따라 실내조도는 영향을 많이 받는다. 따라서 본 연구는 측창채광의 동서남북의 방향에 따라 봄, 여름, 가을, 겨울의 계절에 따라 아침, 점심, 저녁시간대에 따라 변화되는 실내조도를 알아보았다. 실험방법은, 조명시뮬레이션 프로그램인 Lightscape V3.2를 사용하여 교실공간의 치수와 작업면의 높이를 가로 5.8[m], 세로 10.8[m], 높이 3[m], 작업면의 높이 0.75[m]로 정하였고, 각 시설물의 반사율[p]은 벽 80%, 창문 12%, 출입문 13%, 바닥 20%, 천장 85%로 지정하였으며 창문의 투과율은 88%로 설정하였다. 본 연구에서 측정하고자 하는 변수 값은 계절은 여름을 6월20일, 겨울은 1월20일 기준으로 하고 시간대는 09시, 13시, 18시로 하였으며 창측방위는 동, 서, 남, 북으로 정하였으며 계절과 시간은 가장 차이가 많이 나는 값을 선택하였다. 결론으로 창이 남쪽일 때 평균조도가 9,100[lx]로 가장 높았고, 시간별로는 점심에 19,590[lx]로 조도가 가장 높은 것을 알 수 있었고 조도 균제도는 창이 동쪽일 때 겨울에 가장 높았다. 창이 북쪽일 때는 여름이 겨울보다 평균조도가 약간 높았고, 시간별로는 아침에 조도가 약간 높은 것을 알 수 있었고 전체적으로 북쪽 창에서 실내조도가 현저하게 떨어지는 것을 알 수 있었다. 이와 같은 결과로 측창의 브라인드를 현재 사용하고 있는 수직 브라인드 대신에 수평 브라인드를 사용하여 주광의 범위를 넓게 조절하여 사용하게 하고, 점등제어를 현재 측창면과 수직으로 되어있는 배열을 수평으로 한다면 자연채광의 효과를 배가 할 수 있으리라고 사료된다. 미백 전, 미백후, 재광화 후 미세경도 변화 양상이 미백을 하지 않은 대조군과 차이를 보이지 않았으며 (p > 0.05) 미백 전과 미백 후의 미세경도의 차이 미백후와 재광화 후의 미세경도의 차이도 유의할 만한 차이가 없었다 (p > 0.05). 따라서 시중에 판매되고 있는 whitening strip과 미백 젤은 14일 동안의 통상적인 미백과정 동안 법랑질의 미세경도에 영향을 미치지 않는 것으로 사료된다.able pitch와 helical angle보다는 근본적으로 radial land가 screw-in effect의 예방에 더 큰 역할을 하는 것으로 추정될 수 있다 따라서 NiTi file의 사용 경험이 없는 초심자의 경우 근단부 폭경의 유지능력이 좋은 ProFile$^{(R)}$의 사용이 추천된다.)되었다.였으나 강남콩군 외에는 단백질의 소화 흡수율 및 효율은 크게 향상되지 않아 단백질의 소화 흡수율을 떨어뜨리는 요인에 관한 연구가 집중적 으로 이루어져야 하리라고 생각된다.면 바로 위 지점의 풍속을 측정하였다. 각 Seeding 물질에 대해 팬을 켜지 않았을 때, 즉 바람의 영향이 없을 때 측정한 표면유속을 바람의 세기가 변한 경우의 기준 표면유속으로 이용하였다. 본 연구의 결과 비중이 0.01 내외인 Ecofoam과 white polystyrene에 비해 비중이 0.92인 black polypropylene은 대부분이 물속에 잠겨 있어 흐름과 거의 일치하여 움직임을 알 수 있었다. 또한 흐름의 평균유속이 0.165 m/s의 저유속에서 바람이 tracers에 미치는 영향이 평균유속 0.558m/s인 경우보다 커서, 바람의 세기의 증가에 따라 표면유속 측정값이 급속히 감소되었다. 흐름의 평균유속이 큰 경우에는 바람이 tracer에 마치는 영향이 현격히 줄어듬을 보이고 있다. 결론적으로 유속이 증가함에 따라 바람의 영향은 감소하나, 바

  • PDF

Sound absorption characteristics of foamed aluminum considering installing on the wall and in the space (발포알루미늄의 시공방법에 따른 흡음 특성에 관한 연구)

  • Park, Hyeon-Ku;Kim, Hang
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.41 no.1
    • /
    • pp.50-55
    • /
    • 2017
  • Foamed aluminum is an eco-friendly material that is reusable and safe against fire. These superior characteristics have many advantages in the field of building and construction and in cruise ships as sound absorbers. So far, the research on foamed aluminum has been focused on the sound absorption performance using the foaming ratio. Foamed aluminum, when compared with the existing sound absorbers such as glass wool or rock wool, has a better structural performance, and it can be installed on walls in many different ways. This study conducted experiments on the sound absorption characteristics considering the various applications of foamed aluminum. The effects of painting surfaces with the finishing material were compared to that of the normal surface, and the effects of vertical installation and hanging from the ceiling was compared with the effects of installing on the floor.

R&D Review on the Gap Fill of an Engineered Barrier for an HLW Repository (고준위폐기물처분장 공학적방벽의 갭채움재 기술현황)

  • Lee, Jae Owan;Choi, Young-Chul;Kim, Jin-Seop;Choi, Heui-Joo
    • Tunnel and Underground Space
    • /
    • v.24 no.6
    • /
    • pp.405-417
    • /
    • 2014
  • In a high-level waste repository, the gap fill of the engineered barrier is an important component that influences the performance of the buffer and backfill. This paper reviewed the overseas status of R&D on the gap fill used engineered barriers, through which the concept of the gap fill, manufacturing techniques, pellet-molding characteristics, and emplacement techniques were summarized. The concept of a gap fill differs for each country depending on its disposal type and concept. Bentonite has been considered a major material of a gap fill, and clay as an inert filler. Gap fill was used in the form of pellets, granules, or a pellet-granule blend. Pellets are manufactured through one of the following techniques: static compaction, roller compression, or extrusion-cutting. Among these techniques, countries have focused on developing advanced technologies of roller compression and extrusion-cutting techniques for industrial pellet production. The dry density and integrity of the pellet are sensitive to water content, constituent material, manufacturing technique, and pellet size, and are less sensitive to the pressure applied during the manufacturing. For the emplacement of the gap fill, pouring, pouring and tamping, and pouring with vibration techniques were used in the buffer gap of the vertical deposition hole; blowing through the use of shotcrete technology and auger placement and compaction techniques have been used in the gap of horizontal deposition hole and tunnel. However, these emplacement techniques are still technically at the beginning stage, and thus additional research and development are expected to be needed.

A Study on the Characteristics and the Growth Mechanism of Surface Cracks from the Naksansa Seven-Storied Stone Pagoda, Korea (낙산사 칠층석탑에 발달한 표면균열의 특성과 성장 메커니즘)

  • Park, Sung-chul;Kim, Jae-hwan;Jwa, Yong-joo
    • Korean Journal of Heritage: History & Science
    • /
    • v.46 no.2
    • /
    • pp.136-149
    • /
    • 2013
  • We studied the characteristics and the growth mechanism of surface cracks from the Naksansa seven-storied stone pagoda(Treasure No. 499). The pagoda is composed of both medium-grained, porphyritic biotite granite and hornblende-biotite granite. Alkali feldspar megacrysts are easily found as phenocrysts in the rocks. Surface cracks intensely developed at the lower part of the stone pagoda, and their directions are of vertical, horizontal, and diagonal. The rocks of the pagoda have intrinsic microcracks which can be defined as rift and grain rock cleavages. Both rock cleavages seems likely to have led to the crack growth and consequently to the mechanical deterioration of the pagoda. The vertical cracks developed parallel to the vertical compressive stress, whereas horizontal ones formed by tensile strength normal to the vertical compression. In addition mineral cleavages and twin planes of alkali feldspar phenocrysts seems to have been closely related to the mechanical breakdown of the rocks in the NE part of the pagoda.

A Study on the Evacuation Risk of Simultaneous Fires from Exterior (외장재에 의한 동시다발적인 화재의 피난위험성에 관한 연구)

  • Min, Se-Hong
    • Fire Science and Engineering
    • /
    • v.26 no.4
    • /
    • pp.48-54
    • /
    • 2012
  • In order to study on the evacuation risk when connate fires caused by vertical fire spread of the exterior occurs, the egress simulations based on the relevant scenarios has carried out. As a result of it, ASET (permitted evacuation time) was reached in between 550 to 650 seconds in entire floors after vertical smoke spread from fire of combustible exteriors. In particular, ASET was 358 seconds in the first floor, 490 seconds in the six floor and 473 seconds in the tenth floor. In addition, five floors of all levels, the 1st floor, the 6th floor and the 28th floor ~30th floor, show RSET (minimum evacuation time) which is bigger than ASET as evacuation risk. This result presents occupants in high rise buildings with more than 15 floors might not be able to egress of them using staircases due to huge population attempting to evacuate simultaneously. Particularly, 699 people in the upper levels by smoke from the first floor are having difficulty escaping this building since ASET on the first floor adjacent to the ignition point was 358 seconds which is relatively reached fast. Considering a prevention method of the fire and smoke spread, architects have to use non-combustible exterior in the building's facade to be required as an active fire protection system.

Structure and expression of legal principles for artificial intelligence lawyers (인공지능 변호사를 위한 법리의 구조화와 그 표현)

  • Park, Bongcheol
    • Journal of the International Relations & Interdisciplinary Education
    • /
    • v.1 no.1
    • /
    • pp.61-79
    • /
    • 2021
  • In order to implement an artificial intelligence lawyer, this study looked at how to structure legal principles, and then gave specific examples of how structured legal principles can be expressed in predicate logic. While previous studies suggested a method of introducing predicate logic for the reasoning engine of artificial intelligence lawyers, this study focused on the method of expressing legal principles with predicate logic based on the structural appearance of legal principles. Jurisprudence was limited to the content of articles and precedents, and the vertical hierarchy leading to 'law facts - legal requirements - legal effect' and the horizontal hierarchy leading to 'legal effect - defense - defense' were examined. In addition, legal facts were classified and explained that most of the legal facts can be usually expressed in unary or binary predicates. In future research, we plan to program the legal principle expressed in predicate logic and realize an inference engine for artificial intelligence lawyers.

A Study on the Development of Software Supporting the Superstructural Design of Offshore Plant (해양플랜트 상부구조설계 지원 소프트웨어 개발에 대한 연구)

  • Kim, Hyun-Cheol;Kook, Sung-Keun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.11
    • /
    • pp.19-27
    • /
    • 2020
  • On an offshore plant topside, various types of offshore facilities for processing energy resources, such as oil and gas, and equipment and outfitting for connecting these facilities are installed in a limited space. An offshore plant superstructure is composed of numerous supporting rack structures and reinforcements for securing and supporting offshore installations and the related equipment. This paper describes the development of design support software to support this superstructure design efficiently. The developed design support software, which was based on AVEVA Marine's PML(Programmable Macro Language), supports the parametric method for superstructure design. A method of batch 3D modeling from 2D drawings for supporting rack structure produced in the basic and detailed design was also developed using AutoLisp. In addition, through the application example of superstructure module design, the design support software introduced in this paper can be expected to reduce the design time by more than 90% compared to the use of only basic functions of AVEVA PDMS.

TCP Performance Study in Vertical Handoff across Heterogeneous Wireless Networks (이질적 무선망 사이의 수직적 핸드오프에서의 TCP 성능 분석)

  • Pack Sangheon;Choi Yanghee
    • Journal of KIISE:Information Networking
    • /
    • v.32 no.1
    • /
    • pp.20-28
    • /
    • 2005
  • TCP(Transmission Control Protocol) is one of the most important Internet protocols, which is widely used in wireless networks as well as wired networks. However, when TCP is deployed for wireless networks, it takes severe performance degradation because TCP was designed for wired network. To overcome this drawback, a number of TCP variants have been proposed in the literature. However, most previous schemes did not consider TCP enhancement over heterogeneous networks. In heterogeneous networks, an mobile node (MN) may move from one access network to another(i.e., vertical handover). In the case of vertical handover, an MN experiences a TCP performance degradation caused by the packet loss and the sudden change of link characteristics between two different access networks. In this work, we investigate the TCP performance degradation occurred in vortical handover across heterogeneous networks. First, we have conducted the measurement study over GPRS-WLAN testbed. In the measurement study. we observed the TCP performance degradation in the case of handover from WLAN to GPRS. In order to study more different TCP behaviors during vertical handover, we performed comprehensive simulations using a network simulator 2(ns-2). Based on measurement and simulation results, we investigated how to improve TCP performance in vertical handover and we concluded that the existing mechanisms cannot be perfect solutions and new mechanisms are strongly required.

Categorization of two different swing styles using weight transfer patterns of golf swing (압력 중심 및 지면반력 이동 패턴에 의한 두 가지의 다른 골프 스윙 스타일 분류)

  • Linm, Young-Tae
    • Korean Journal of Applied Biomechanics
    • /
    • v.14 no.2
    • /
    • pp.179-186
    • /
    • 2004
  • 본 연구의 목적은 숙련된 골프선수들의 골프 스윙동작 시 상이한 무게중심 변환 형태가 존재하는지 그리고 만약 이 상이한 무게중심 변환 형태가 존재한다면 어떤 형태로 나타나는지를 알아보고자 하였다. 본 실험을 위해 13명의 남자 대학 엘리트 골프 선수들을 대상으로 드라이버를 이용한 스윙을 실시하게 하였다. 수직 지면 반력과 압력중심 이동 패턴을 측정하기 위해 지면반력기 2대와 스윙 동작 시 critical event 설정을 위해 1대의 고감도 비디오 카메라를 사용하였다. 또한 스윙 결과로 나타나는 비거리, 클럽헤드 속도를 측정하기 위해 스윙 분석기를 이용하였다. 피험자 간 상호 비교를 위해 측정된 수직 지면반력 성분은 몸무게를 이용하여 표준화하였고 압력중심은 어드레스시의 압력중심을 원점으로 재 계산하였다. 또한 임팩트 시 측정된 좌우 수직 지면반력 성분을 이용하여 두 가지의 상이한 스윙 스타일로 구분하였다. 연구결과 8명(62%)의 피험자에게서 좌측 수직력 성분이 상대적으로 높은 전족(FFS) 스타일임이 밝혀졌고 5명(38%)은 그 반대인 리버스(RFS) 스타일임이 밝혀졌다. 이 전족 스타일은 대부분의 골퍼들이 선호하고 또 그렇게 하여야만 한다고 믿고 있는 스윙방식이다. 이와 반대인 리버스 스타일은 코치들이 금기시 하는 스윙의 형태로서 초보자, 즉 비숙련 자에게만 나타나는 전형적인 스윙형태라고 인지되고 있다. 하지만 이 두 가지 스윙 스타일이 초보자가 아닌 숙련된 골프 선수들에게서도 실제 존재한다는 것이 본 실험 결과로 나타났다. 평균 압력중심 이동 패턴은 전후축 방향의 경우 RFS 스타일 그룹이 RFS 스타일 그룹에 비해 압력중심 이동이 크게 나타났고 좌우축의 경우에도 RFS 그룹이 FFS 그룹에 비해 압력중심 이동이 크게 나타났다. 특히 임팩트 시 압력중심의 위치가 FFS 그룹은 전족 근처에 있는 반면 RFS 그룹은 후족(rear foot)에 위치하여 두 스윙 스타일의 차이점을 분명하게 보여주었다. 따라서 비록 이 RFS 스타일이 대부분의 코칭 이론과는 상반되는 무게중심 이동 패턴을 보여주었지만 이 스윙 스타일이 잘못된 것이 아닌 실제 존재하는 하나의 스윙 스타일로 인식하여 스윙 지도 시 이에 알맞은 적절한 교습법을 마련해야 할 것이다.