• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.41-49
• /
• 2003

This study examined the relations between degree of posterior dental compensation and skeletal discrepancy in Class III malocclusion. The pretreatment lateral cephalogras and dental casts of 87 skeletal Class III adults were selected to provide a random sampling of skeletal Class III malocclusion. Skeletal discrepancy was described with ANB angle, Wits appraisal, SN-Mn plane angle, FMA and ratios of basal arch width. Degree of posterior dental compensation was described with maxillary intermolar angle, mandibular interolar angle and sum of intermoloar angle. The relationships between skeletal discrepancy and degree of posterior dental compensation were analyzed with simple correlation analysis, stepwise multiple regression analysis. The results were as follows 1. A strong association was found between the variation in the anteroposterior measure, ANB angle and the variation of posterior dental compensation measures, sum of intermolar angle and mandibular intermolar angle in skeletal Class III malocclusion. 2. There was no statistically significant relationship between the variation in the vertical measures and the variation of posterior dental compensation measures in skeletal Class III malocclusion. 3. There was no statistically significant relationship between the variation in the anteroposterior and vortical measures and degree of basal arch width discrepancy.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.3
• /
• pp.157-170
• /
• 2021

Loss of posterior bite support might cause unstable occlusal relationship and when the mandible slides forward in the centric or habitual occlusion, excessive load is applied to the anterior region followed by causing the occlusal plane to collapse or leading to a decrease in occlusal vertical dimension. In addition, disorder of temporomandibular joint function may occur. The inter-dental arch discrepancy causes a mismatch in the vertical and horizontal overlap of the anterior and posterior regions. The deep bite in the anterior region and the scissor bite in the posterior region cause unstable occlusal contact and insufficient occlusal contact area. This report was to rehabilitate a patient with above-mentioned complex problems. Physiologic adaptation to increased vertical dimension and new occlusal plane were evaluated using provisional prostheses, and definitive prostheses was fabricated using cross-mounting technique. Stable occlusion, harmonious teeth overlap and adequate occlusal plane were established, so functionally and aesthetically satisfactory results are obtained.

• The korean journal of orthodontics
• /
• v.27 no.4 s.63
• /
• pp.643-659
• /
• 1997

For the total treatment of skeletal malocclusions, 3-dimensional evaluation and diagnosis are essential. Although anteroposterior discrepancies can be evaluated through various methods, the satisfactory methods for evaluations of facial asymmetry and transverse discrepancies are yet to be found. The adequate diagnosis and treatment of transverse discrepancies may be more important in the maintenance of functional occlusion as well as for the stability of results obtained from orthognathic surgery than the anteroposterior or vertical discrepancies. Since the soft tissue effects from the transverse discrepancies may not be pronounced, especially when combined with anteroposterior or vertical discrepancies which have prominent characteristics, the differentiation of their effects may be difficult from visual inspection alone. Therefore it is essential that the normal facial proportions would be established from the posteroanterior cephalometry as a reference for the accurate diagnosis and treatment. The present study evaluates 76 subjects from Yonsei University freshmen with normal facial symmetry and occlusion. Posteroanterior cephalograms were taken from the subjects and the normal values and facial proportions are obtained. The results are as follows. 1. The transverse and vortical values from posteroanterior cephalometry and their ratio, with means and standard deviations are calculated. 2. The ratio of vertical values to transverse values is 0.837 (male 0.836, female 0.841). 3. The Proportion of maxillary and mandibular widths is 0.747 (male 0.745, female 0.752), with statistically significant correlation. 4. Various degree of significant correlations are observed in the following craniofacial widths; (Cranial width, Bizygomaticofrontal suture width, Facial width, Maxillary width, Upper & Lower Intermolar width, Mandibular width). 5. Although the facial height as well as other line measurements increase as the facial widths increase, angle measurement ($Bj\ddot{o}rk$ Sum, Mandibular Plane Angle, Gonial Angle), decreases and posterior to anterior facial height ratio increases, therefore indicating the tendency for a brachycephalic facial type. These results may be used as references for the treatment planning in orthognathic and orthodontic treatments for the dentofacial deformity patients.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.521-533
• /
• 2000

This study was investigated to evaluate the morphologic characteristics of openbite and deep bite in Class I malocclusion patients and to find skeletodental factors which contributed to vertical discrepancy in Class I malocclusion. The subjects were consisted of 40 control subjects (male 20, female 20) and 40 Class I openbite patients and 40 Class I deep bite patients. Lateral cephalograms in centric occlusion were taken, traced and digitized lot each subjects. The computerized statistical analysis were carried out with SPSS program. The results were as follows. 1. The pattern of vortical discrepancy in Class I malocclusion is mainly influenced by the skeletodental factors under palatal plane. 2. In openbite group, vortical discrepancy is prominent on anterior lower face and is closely related with skeletal factors such as mandibular form and inclination. 3. In deep bite group, dental factors such as ewe of Spee, vertical height of maxillary molar and skeletal factor such as articular angle were contributed to the vertical discrepancy. 4. The multiple regression analysis showed that overbite in Class I molar relationship was determined mainly by dental factors such as lower incisor to occlusal plane angle, curve of Spee, interincisal angle, and ODI.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.182-188
• /
• 2019

A proper vertical dimension and a harmonious occlusal plane are essential to satisfy a patient esthetically and functionally. A maxillomandibular occlusal vertical dimension is determined by the elevators which repeatedly contracts to a certain length, and a tooth location is determined by a maxillomandibular vertical dimension. The patient of this case came in with the incongruity of the lips and the occlusal plane. The result of clinical test showed the lack of length of the lower anterior due to the reduction of vertical dimension, the deep overbite of anterior, the excessive attrition of anterior, and the incongruity of occlusal plane. After the diagnostic wax-up, the temporary restoration was installed, and final prosthesis was installed after 6 months. As a result, the patient obtained a functionally and esthetically satisfying result.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.291-297
• /
• 2003

While making diagnosis and the treatment plan for the growing children who visited at Chonnam National University Hospital for orthodontic treatment, authors obtained 8 lateral cephalometric measurements in antero-posterior and vertical relationship such as APDI, WITS, ANB, SN-MP, ODI, PFH/AFH, Y-axis, SUM for children aged 7 to 9 with class III malocclusion and compared them with these of 73 children of elementary school aged 7 to 9 with proper profile and normal occlusion in Gwangju. The results were as follows: 1. Between normal occlusion and class III malocclusion, ANB, SN-MP, ODI, SUM, except PFH/AFH and Y-axis showed statistically significant differences(p<0.05). 2. Between mesurements to describe skeletal disorder of antero-posterior relationship such as APDI, WITS, ANB and skeletal disorder of vertical relationship such as SN-MP, ODI, PFH/AFH, Y-axis, SUM, all of them in both normal occlusion and Class III malocclusion showed significant correlation, except Y-axis, SUM correlation(p<0.01). 3. Wald' statistics of WITS, ANB and APDI expressing skeletal disorder of antero-posterior relationship showed 7.118, 5.148, 0.741, respectively and Wald' statistics of ODI, Y-axis, PFH/AFH, SN-MP, SUM were presented 28.348, 2.238, 1.376, 0.090, 0.089, respectively. Therefore, WITS and ODI could be considered as useful diagnotic measurements for class III malocclusion.

• The korean journal of orthodontics
• /
• v.34 no.4 s.105
• /
• pp.313-324
• /
• 2004

The Purpose of this study was to investigate the predictors of relapse in orthodontic treatment of skeletal Class III malocclusion in growing patients. A total of 55 patients were studied and all subjects were divided into two groups according to their stability in the post-treatment stage. Of the sample, 33 patients were included in the stable group and the remaining 22 were assigned to the relapse group. Cephalometric data of the pre-treatment stage was taken and compared between the stable and relapse group. The following results were obtained through t-test: 1. This study presented statistical evidence to show that the major skeletal determinant of prognosis in Class III orthodontic treatment was not anteroposterior discrepancy .but vertical discrepancy, especially within the AB-maxillo mandibular triangle. Vertical angular measurements that showed statistically significant differences were AB-MP and ODI(P<0.01) and the vortical ratio measurements were MP-P/AL and PP-P/AL(P<0.05). 2. Relapse tendency increased with the steep occlusal Plane, especially the steep lower occlusal plane. As to occlusal plane, there were statistically significant differences in OP(L)-PP, OP-PP, AB-OP(L) and Wits appraisal(P<0.05). This study claimed that anteroposterior discrepancy was not necessarily the proper criteria to predict relapse. Vertical discrepancy had a significant effect on post-treatment stability.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.763-774
• /
• 1998

The purpose of this study was to evaluate the morphology of mandibular symphysis and location of lower incisor under the influence of the craniofacial skeleton in skeletal Class III malocclusion. The sample consisted of 132 adults who have severe Class III malocclusion(prognathism group, 33 males and 33 females), and who have normal occlusion(normal group, 33 males and 33 females). They had not received any orthodontic treatment or orthognathic surgery. The lateral cephalograms were evaluated. The results were as follows : 1. Prognathism group were larger than normal group in comparison of facial skeleton (p<0.05) with the exception of ${\angle}FH-Pal$, ${\angle}SNA$. 2. In the morphology of symphysis, measurements of anteroposterior width(LaABBW, LiABBW, SW) of prognathism group were significantly less than that of normal group(p<0.001). 3. In the correlative analysis between the craniofacial skeleton and symphysis measurements of prognathism group, vertical measurements in relation with cranial base and mandibular plane showed reverse correlationship with anteroposterior width of symphysis(LiACBW, LaACBW, LiABBW, SW)(p<0.05). But, there was not distinct difference between horizontal skeletal measurements and symphysis measurements(p>0.05). 4. The probability by regression test between vertical measurements(${\angle}SN-Mn,\;{\angle}FMA,\;{\angle}Pal-Mn,\;{\angle}LFH$) and symphysis measurements(LiACBW, LiABBW, SW, ${\angle}LISA$) were very high(p<0.001).

• Journal of Oral Medicine and Pain
• /
• v.32 no.3
• /
• pp.293-303
• /
• 2007

The purpose of this paper is to evaluate if there is a relationship between anterior disc displacement without reduction and development of anterior open bite, and a relation between occurrence of open bite and occlusal appliance therapy. In general, the statistically significant differences were found between the Group 1 and 2 and normal mean group. The variables that represent mandibular size and form, showed a statistical significance in all 3 groups. Also 3 groups patients had a smaller ANB, a larger FMA than normal mean group. When we compared the 3 groups with respect to all cephalometric measurements by One-way analysis of variance (ANOVA), group 1 and 2 patients had a larger FMA, a larger SN to mandibular plane angle, a larger maxillomandibular plane angle, a larger occlusal plane to mandibular plane angle, a smaller total posterior facial height/total anterior facial height(%), and a larger gonial angle than group 3. The statistically significant differences were not found between the Group 1 and 2, and skeletal patterns were similar. Thus, morphologic features of patients with vertical discrepancies may represent a risk factor for the development of anterior open bite with or without occlusal appliance treatment. In case of patients with vertical discrepancy, we may have to be more careful when inducing a change of the vertical dimension.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.2
• /
• pp.110-120
• /
• 2020

Although not all kinds of deep bite occlusions are considered pathological states, they can cause persistent wear and eruption of the anterior mandibular teeth if the anterior occlusal contact is unstable or accompanied by an occlusal disharmony. The patient was a 72-year-old man with no occlusal contact of the remaining anterior teeth in the centric relation position because of a skeletal class II malocclusion and loss of occlusal support. If the vertical dimension needs to be increased for prosthetic restoration in a patient with a deep bite, the amount of vertical dimension increase must be determined through precise diagnosis. This is because the overjet may increase and cause an unstable occlusion. In this review, we report the case of a patient with a stable occlusion and good treatment results achieved by using a removable partial denture prosthesis and applying the Dahl concept.