• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.137-143
• /
• 2014

Recently, as new paradigm for government operation called government 3.0, government is actively operating policy opening and sharing public data. In addition, the Ministry of Land are operating an open platform integrated map service (the VWorld) which provides a variety of video contents such as the country's national spatial information, traffic information and three-dimensional building for the public. According to W3C Foundation's Open Data Status Report(2013), our country has the evaluated results that the part of the government's policy support and planning is good while the part of the data management is vulnerable. So our country needs the quality improvement for the data management. In addition, a digital aerial photograph image data is required to be up-to-date for the three-dimensional spatial object data. In this paper, we present the method for enhancement of the accuracy of vertical position and for maintainment of up-to-date vertical position. Our methods evaluate the data quality and analyze the cause of error of measurement utilizing the national standard quality assessment method. The result of research shows that the accuracy of vertical position is improved if the height of the building captain is adjusted by the quality assessment values and a three-dimensional model has up-to-date data if reconstruction and extension information of construction register is utilized.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.173-174
• /
• 2015

컨테이너 터미널에서 이적작업은 적하작업과 반출작업을 신속하게 처리하기 위해 장치장에 흩어져 있는 컨테이너들을 재배치하는 것이다. 본 연구는 수직 배치형 장치장 블록 내에서 컨테이너 재배치 작업계획 문제를 다룬다. 재배치 작업계획은 대상 컨테이너, 옮겨질 위치 그리고 재배치 작업 순서를 정하는 것이다. 본 연구는 재배치 작업시간, 반출작업, 적하작업의 가중시간 비용을 최소화하면서 재배치 작업동안 공간 가용성이 만족되도록 장치위치와 작업순서를 함께 결정하는 혼합정수계획모형을 개발하였다.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.51-57
• /
• 2014

A MILD(Moderate and Intense Low oxygen Dilution) combustion, which is effective in the reduction of NOx, is considerably affected by the recirculation flow position of hot exhaust gas to the combustion furnace. A numerical analysis was accomplished to elucidate the flow characteristics in the MILD combustion incinerator for several cases with or without exhaust gas recirculation. It could be seen from the result of the present numerical study that the flow recirculation could be observed in the upper region over the vertical dividing wall for the case without exhaust gas recirculation. The optimal position of exhaust gas recirculation position was derived by the comparison of %RMS of x directional velocity for the cases with exhaust gas recirculation. The case with the exhaust gas recirculation position at the upper right of free board was the most effective with the smallest value of 57.4% RMS.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.425-432
• /
• 1995

The purposee of this study is to investigate the correlation between the horizontal and vertical discrepancy of facial bones and the horizontal and vertical position of glenoid fossa. For this study, the cephalograms were taken to the adults over 18 of age(96 men and 108women). The cephalograms were divided into three groups according to the ANB angle(below 0.5 degree, 0.5 to 4.0 degree and above 38 degree), and they were divided into three groups according to the SN-MP angle(below 30 degree, 30 to 38 degree and above 38 degree). The following conclusions were obtained : 1. In the horizontal discrepancy of facial bone(ANB), the horiontal position of glenoid fossa(X) was anterior position as the order of Class II, Class I, Cias III. 2. The horizontal position of glenoid fossa(X) showed the significant correlation with ANB and SNB, but not with SNA. 3. In the vertical discrepancy of facial bone(SN-MP), thee less anglee was the greater vertical position of glenoid fossa (X) and was followed by the medium and high angle in order. 4. The vertical position of glenoid fossa(Y) showed thhat the SN-FH was the most significant correlation, and it was followed as the order of SN-FH, SN-MP and SN-OP angle. 5. There was the samllest length of anterior cranial base in the Class III malocclusion.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.1
• /
• pp.41-50
• /
• 2011

The gingival zenith is the most apical point of the gingival outline. This study aimed to quantify the mesio-distal and apico-coronal displacements of gingival zenith in maxillary anterior dentition. 50 healthy patients, who ranged in age from 25 to 36 years were recruited for the study. Alginate impressions of the study group were made and poured with the type III stone. The gingival zenith positions of maxillary anterior teeth were measured in a mesial-lateral direction from the vertical bisected midline. The apico-coronal displacements of the gingival zenith of lateral incisors were measured from a line joining the gingival zeniths of the central incisor and canine. The gingival zeniths were distally displaced in 90%, 53% and 23% of the maxillary cetral incisors, lateral incisors and canines respectively. The mean distal displacements of the gingival zeniths to the vertical bisected midline of central incisors, lateral incisors and canines were 0.90 mm, 0.29 mm and 0.06 mm respectively. The gingival zeniths of lateral incisors were positioned $0.73{\pm}0.43$ mm coronally to the line joining the gingival zenith of central incisors and canines. Consideration of these findings may improve restorative procedures in the anterior maxillary dentition.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.3
• /
• pp.3-9
• /
• 2016

UAV(unmanned aerial vehicle) can quickly produce orthoimage with high-spatial resolution and DSM(digital surface model) at low cost. However, vertical and horizontal positioning accuracy of orthoimage and DSM, which are obtained by UAV, are influenced by image processing techniques, quality of aerial photo, the number and position of GCPs(ground control points) and overlap in flight plan. In this study, effects of overlap and the number of GCPs are analyzed in orthoimage and DSM. Positioning accuracy are estimated based on RMSE(root mean square error) by using dataset of nine pairs. In the experiments, Overlaps and the number of GCPs have influence on horizontal and vertical accuracy of orthoimage and DSM.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.94-100
• /
• 2012

The passive control by vertical splitter plate of fluid force acting on a square prism near a plane wall was studied by measuring of fluid force on the prism and by visualization of the flow field using PIV. The hight of the splitter plate was 10% of the square width. The experimental parameters were the attaching position of vertical splitter plate and the space ratios G/B to the prism height. Time variation of vorticity was most remarkable at 3.0B(B: prism height) position toward wake direction from the center of the prism. The point of inflection of average lift coefficient and Strouhal number on the prism were represented at the space ratio G/B=0.4~0.6 for the prism having vertical splitter plate. The drag of the prism was reduced average 5.0% with the space ratios by attaching the vertical splitter plate at the upper and rear corner on the prism. In this case, the size of the separated region on the upside of the prism was smaller than that of prism having no the splitter plate.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.40-51
• /
• 2021

In this paper, the design requirements was produced by analyzing domestic and foreign regulations of the vertical takeoff and landing site required to operate the urban air mobility (UAM) system in Korea and the size of the take-off and landing pads were defined, and the configuration of vertiport was proposed. First, for the metropolitan area with high population density, pilot locations of the vertical take-off and landing site were selected based on the demonstration routes suggested by the Ministry of Land, Infrastructure and Transport and analyzed the characteristics of each location and determined the number of possible installations of vertiport by measuring each site. After that, variables necessary for the operation of the vertical takeoff and landing area were set, and the hourly, daily, monthly aircraft operating cycle, the number of acceptable people, and efficiency were calculated according to the number of simultaneous operation and the number of stand. Finally, using CATIA, the configurations of the virtual vertiport was created by applying the design requirements.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1993.04a
• /
• pp.402-411
• /
• 1993

비디오 주행계의 안정성에 영향을 주는 인자들은 많이 있다. 그중 수직포스트의 경사각은 수직포스트를 지나는 테이프의 주행높이 변동에 영향을 주기 때문에 비디오 데크의 조립상에서 수직포스트의 경사각을 관리하는 것이 비디오 주행계의 안정성을 확보하는데 있어서 필요하다. 특히 비디오 데크의 조립시 수직 포스트의 경사각을 어느정도까지 허용해도 비디오 주행계의 안정성에 영향을 주지 않는지 알때 비디오 데크의 주립시 보다 효과적인 조립공정의 관리가 이루어 질 것으로 사료된다. 본 연구에서는 수직포스트의 경사각에 대한 허용오차를 결정하는 방법과 이에 따르는 다음 포스트들이 세워져야 할 위치를 결정하는 방법을 제시하였는데 이를 위하여 기구학과 통계적인 방법을 사용하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.392-397
• /
• 1996

지반특성에 따라 지진발생시 면진구조물과 비면진 구조물의 응답특성이 어떠한가를 평가하기위해, 1940 El Centro 지진을 입력지진으로 하고, 면진구조물로는 가압경수형 원자로격납건물을 이용하여 수평(NS) 및 수직지진입력에 대한 시간이력해석을 수행하였다. 0.5Hz 수평면진 구조물의 경우 수평방향 가속도응답은 지반특성에 무관하게 거의 변화가 없으며, 또 2Hz 이상에서 비면진구조물의 수평지진가속도응답보다 현저히 낮은 가속도응답을 갖는다. 면진베어링의 수직방향 21Hz 고유진동수는 풍화암의 경우 수직방향 가속도응답에 영향을 주지 않으나. 경암의 경우 원자로지지점에서의 수직방향 가속도응답을 전반적으로 증가시킨다. 비면진 구조물의 경우 지반의 강성이 약할수록 가속도응답이 비교적 큰 폴라크레인위치에서 수평 및 수직방향 가속도응답이 감소되는 것으로 나타났으며, 특히 수직방향의 가속도응답이 크게 감소하는 것으로 나타났다.